What does the 00 and LS bracing look like?

Started by gitnoob, June 13, 2010, 01:06:40 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

I was poking around inside my Parlor recently, and noticed that the bracing is fairly light (due to the small body).

Typical Larrivee bracing looks like this:


Notice the two flat finger braces on both sides and the two lower horizontal face braces.

The Parlor has no finger braces and only one lower face brace.

How about the 00?    Did Larrivee go lighter on the bracing than, say, the OM?
Gits: 2004 P-01K, 2005 OM-03MT
Uke: Kala KA-ASKS with Larrivee Flamed Koa
Chops: fingerstyle noob

This is what the tops looked like in Oxnard last August, when they were building that special run - I think most of the guitars have very similar bracing, perhaps a little less on the parlors with the lower tension on the bridge.

I also took a picture of my LS with a CF lamp inside the body - this is the LS 12 fret 12 string for reference -

Tad

[attachment deleted by admin]
Bunch of Larrivees - all good -
and a wife that still puts up with me, which is the best -

I'm bumping this thread because I got to play with one of the F-III's recently.

Tad, when I first saw the bracing in your 12-string LS, I was struck by the size of the bridge plate.    But it made sense to me for a 12-string because of the added tension.

I discovered that the 6-string F-III has identical bracing, including that large bridge plate.

So now I'm curious if anybody else has examined the bracing of their LS-03.     Is it the same as Tad's 12-string?
Gits: 2004 P-01K, 2005 OM-03MT
Uke: Kala KA-ASKS with Larrivee Flamed Koa
Chops: fingerstyle noob

The bridge plate is that large due to the 12 fret neck joint.Its also the same on on my OM03PA also a 12 fret neck.My two LS's are 14 fret neck joints and the plate is more like the typical bracing shown.Hope this helps.
A REPAIRPERSON,Barefoot Rob gone to a better place
OM03PA
Favorite saying
 OB LA DE OB LA DA,LIFE GOES ON---BRA,It is what it is,You just gotta deal it,
One By One The Penguins Steal My Sanity, Keith and Barefoot Rob on youtube
Still unclrob
#19
12 people ignoring me,so cool
rpjguitarworks
Call PM me I may be able to help

Thanks, unclrob, that sort of makes sense.

The bridge is lower, but they left the X at the same location, so they reinforced between the X and the bridge with that small brace, eliminated the second lower face brace, and made the bridge plate larger.

That is a huge departure from Martin's approach -- very interesting.

It's also interesting that the 12-string bracing is the same as the 6-string.    Most 12-strings I've seen have heavier bracing.

And, FWIW, the 12-fret Parlor bracing is quite different from the 12-fret LS.
Gits: 2004 P-01K, 2005 OM-03MT
Uke: Kala KA-ASKS with Larrivee Flamed Koa
Chops: fingerstyle noob

Quote from: gitnoob on July 04, 2010, 12:13:27 AM

Tad, when I first saw the bracing in your 12-string LS, I was struck by the size of the bridge plate.    But it made sense to me for a 12-string because of the added tension.


It doesn't make sense when you know what a bridge plate is for and what it isn't for. The main function of the bridge plate is to keep the ball ends from tearing through the top.

Does it resist tension? Yes, but it does a very poor job. When you increase bridge plate size beyond the footprint of the bridge you aren't adding much stiffness for the amount of mass you are adding. This is because low flat grafts make poor braces for basically the same reason a 2x8" board is easy to bend when you exert force on the wide surface but not when you exert force on the narrow surface. If your desire is simply to increase the stiffness of the top to resist string pull then you shouldn't use a giant bridge plate to accomplish this.

I'm sorry but I still find it disturbing that despite Larrivee using the largest recorded bridge plate in human history they still managed to miss the bridge.

Eh, it's a brace.    Yeah, going tall and narrow would increase the strength and reduce the mass, but Larrivee uses flat braces for the finger braces as well.    I assume he's going for a certain voice by doing so.     This is obviously a departure from his "standard" bracing pattern, so I assume he gave it some thought.
Gits: 2004 P-01K, 2005 OM-03MT
Uke: Kala KA-ASKS with Larrivee Flamed Koa
Chops: fingerstyle noob

Quote from: jeremy3220 on July 04, 2010, 11:06:51 AM
It doesn't make sense when you know what a bridge plate is for and what it isn't for. The main function of the bridge plate is to keep the ball ends from tearing through the top.

Does it resist tension? Yes, but it does a very poor job. When you increase bridge plate size beyond the footprint of the bridge you aren't adding much stiffness for the amount of mass you are adding. This is because low flat grafts make poor braces for basically the same reason a 2x8" board is easy to bend when you exert force on the wide surface but not when you exert force on the narrow surface. If your desire is simply to increase the stiffness of the top to resist string pull then you shouldn't use a giant bridge plate to accomplish this.

I'm sorry but I still find it disturbing that despite Larrivee using the largest recorded bridge plate in human history they still managed to miss the bridge.
Well I've owned six Larrivees and have yet to see any pronounced bellying of the top/bridge area similar to some Martins and Gibsons I've owned.  With one old Gibson dread I could only use light gauge strings because mediums would raise the bulge/action almost unplayable  So perhaps Mr. Larrivee with his vast experience knows what he's doing.

gtrplayer  

Quote from: gitnoob on July 04, 2010, 12:00:25 PM
Eh, it's a brace.    Yeah, going tall and narrow would increase the strength and reduce the mass, but Larrivee uses flat braces for the finger braces as well.    I assume he's going for a certain voice by doing so.     This is obviously a departure from his "standard" bracing pattern, so I assume he gave it some thought.

Exactly, for whatever reason it was done, it wasn't due to a need to overcome tension.


Quote from: gtrplayer on July 04, 2010, 12:08:06 PM
Well I've owned six Larrivees and have yet to see any pronounced bellying of the top/bridge area similar to some Martins and Gibsons I've owned.  With one old Gibson dread I could only use light gauge strings because mediums would raise the bulge/action almost unplayable 

Having no belly is not a good thing.




Quote from: jeremy3220 on July 04, 2010, 01:40:11 PM
Having no belly is not a good thing.

Interesting response to a statement about *pronounced* bellying.   :smile:

FWIW, I do have a Martin that was too-lightly built.   Pronounced belly.   Sinking below the sound hole.  Rotated bridge.    But it sounds great.

There are also builders, like Charles Fox, who build for both robustness and responsiveness:



I think Larrivee is in the same camp.
Gits: 2004 P-01K, 2005 OM-03MT
Uke: Kala KA-ASKS with Larrivee Flamed Koa
Chops: fingerstyle noob

Quote from: jeremy3220 on July 04, 2010, 01:40:11 PM

Having no belly is not a good thing.





Some guitar tops are built with a slight arch, some...Gibsons come to mind.  But "pronounced" belly, a la Santa Claus,  is another matter entirely.   I've yet to see this with a Larry.  With regards to his bracing, Jean's walking the fence between stability/sound and doing it well.

Quote from: gtrplayer on July 04, 2010, 03:02:32 PM
Some guitar tops are built with a slight arch, some...Gibsons come to mind.  But "pronounced" belly, a la Santa Claus,  is another matter entirely.   I've yet to see this with a Larry.  With regards to his bracing, Jean's walking the fence between stability/sound and doing it well.

I can assure you that having built arches into guitar tops myself you aren't telling me anything I don't know and when I say belly I mean belly not top arch or radius.


Ya'll can keep talking about which guitars have a belly and which ones you like the sound of but I'm not interested. My initial post was about the structural significance of the bridge plate.

Thats what so cool everyone builds differently.I more then happy with the way Larrivee builds theres guitars.Never had a problem with the bellying on theres have had that problem others.
A REPAIRPERSON,Barefoot Rob gone to a better place
OM03PA
Favorite saying
 OB LA DE OB LA DA,LIFE GOES ON---BRA,It is what it is,You just gotta deal it,
One By One The Penguins Steal My Sanity, Keith and Barefoot Rob on youtube
Still unclrob
#19
12 people ignoring me,so cool
rpjguitarworks
Call PM me I may be able to help

Quote from: unclrob on July 04, 2010, 04:24:57 PM
Thats what so cool everyone builds differently.I more then happy with the way Larrivee builds theres guitars.Never had a problem with the bellying on theres have had that problem others.
I'm with you unclrob, same observations I've seen also.  The lack of a Larrivee bulge might be due to that large bridge plate somebody mentioned. 
  Larrivee's got it down right.

gtrplayer   

Slight bellying around the bridge is desirable. No belly at all is an almost absolute sign of overbuilt guitars. Larrivee guitars are heavily built instruments. There is no getting around that. That being said, lots of folks like the Larrivee voice and make great music with them. To each their own. I can't understand why so many of the folks that claim they love the way Larrivee guitars sound still get their panties all in a bunch about them being heavier guitars overall when compared to lots of other factory built guitars. If you like the sounds coming out of the box, you like the sound. The fact that they are heavily built doesn't matter if the voice is pleasing to you. Mama Cass was, er, uh, shall we say, a low utilities girl, but it didn't change the fact that she sure had a pleasing voice to many folks.

Quote from: GA-ME on July 05, 2010, 09:57:58 AM
Slight bellying around the bridge is desirable. No belly at all is an almost absolute sign of overbuilt guitars. Larrivee guitars are heavily built instruments. There is no getting around that. That being said, lots of folks like the Larrivee voice and make great music with them. To each their own. I can't understand why so many of the folks that claim they love the way Larrivee guitars sound still get their panties all in a bunch about them being heavier guitars overall when compared to lots of other factory built guitars. If you like the sounds coming out of the box, you like the sound. The fact that they are heavily built doesn't matter if the voice is pleasing to you. Mama Cass was, er, uh, shall we say, a low utilities girl, but it didn't change the fact that she sure had a pleasing voice to many folks.
I like that I can use any weight strings on my Larrivee's and they will likely last 150 years (academic I know.)

It is speculated Martin likely went to rear-shifted braces and large bridge plates because they were getting too many problems with the lighter built gits. I see what GA_ME is saying about a little bellying. But I love the Larrivee sound, especially as the gits mature - usually without problems.
Chris
Larrivee's '07  L-09 (40th Commemorative); '09 00-03 S.E; '08 P-09
Eastman '07 AC 650-12 Jumbo (NAMM)
Martin   '11 D Mahogany (FSC Golden Era type)
Voyage-Air '10 VAOM-06
-the nylon string-
Goya (Levin) '58 G-30
-dulcimer-
'11 McSpadden

When my '74 LoPrinzi got a neck reset a few years back, the tech said that the slight bellying on the top was actually a good thing.  I wasn't sure about it then, but it makes sense now.

I wish I had just a slight bellying!
Play it daily for best results.

Quote from: cke on July 06, 2010, 05:24:21 PM

It is speculated Martin likely went to rear-shifted braces and large bridge plates because they were getting too many problems with the lighter built gits. I see what GA_ME is saying about a little bellying. But I love the Larrivee sound, especially as the gits mature - usually without problems.

You have to realize what context that took place in. It's not as though Daddario EJ-16s were around back then. I believe they commonly used heavier gauge strings like 14-60 and wrappings were made of a different material. Also note how quick the changes took place. Martin within just a few years of starting to sell steel string guitars moved the braces back; this means if they were having issues then they were almost immediate issues due to string gauge not longevity issues. This makes sense because many of those 20's and 30's Martins are still around 70+ years later and in great shape - most likely due to not having someone put heavy strings on. In other words as long as you put the appropriate gauge strings on it doesn't matter how lightly built the guitar is.

And since Martin knew what they were doing back then they didn't use a large bridge plate to beef up their guitars. They started putting large rosewood bridge plates on in 1969 and kicked off the worst era in Martin's history.

I don't think the Martin stigma applies here.   It seems like Larrivee increased the area of the bridge plate in conjunction with taking out one of the lower face braces.

Kevin Ryan uses a giant bridge plate as well....

Gits: 2004 P-01K, 2005 OM-03MT
Uke: Kala KA-ASKS with Larrivee Flamed Koa
Chops: fingerstyle noob

Quote from: jeremy3220 on July 07, 2010, 09:45:52 AM
You have to realize what context that took place in. It's not as though Daddario EJ-16s were around back then. I believe they commonly used heavier gauge strings like 14-60 and wrappings were made of a different material. Also note how quick the changes took place. Martin within just a few years of starting to sell steel string guitars moved the braces back; this means if they were having issues then they were almost immediate issues due to string gauge not longevity issues. This makes sense because many of those 20's and 30's Martins are still around 70+ years later and in great shape - most likely due to not having someone put heavy strings on. In other words as long as you put the appropriate gauge strings on it doesn't matter how lightly built the guitar is.

And since Martin knew what they were doing back then they didn't use a large bridge plate to beef up their guitars. They started putting large rosewood bridge plates on in 1969 and kicked off the worst era in Martin's history.
Thanks for the info. So why DID Martin use a bigger plate?
Chris
Larrivee's '07  L-09 (40th Commemorative); '09 00-03 S.E; '08 P-09
Eastman '07 AC 650-12 Jumbo (NAMM)
Martin   '11 D Mahogany (FSC Golden Era type)
Voyage-Air '10 VAOM-06
-the nylon string-
Goya (Levin) '58 G-30
-dulcimer-
'11 McSpadden

Powered by EzPortal