What does the 00 and LS bracing look like?

Started by gitnoob, June 13, 2010, 01:06:40 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Martin change the bridge plate in 67 not 69.The 70's made stuff didn't suffer from the the change of bridge plates,like so many companies of the time period but from the advance's that the off shore companies were making into the market and also from very poor quality control.Why they changed the size of the bridge plate i can't really tell you as I don't know.Maybe it had something to do with all those life time warrenty repairs they were doing.
gitknoob thats a really cool bridge plate design.
A REPAIRPERSON,Barefoot Rob gone to a better place
OM03PA
Favorite saying
 OB LA DE OB LA DA,LIFE GOES ON---BRA,It is what it is,You just gotta deal it,
One By One The Penguins Steal My Sanity, Keith and Barefoot Rob on youtube
Still unclrob
#19
12 people ignoring me,so cool
rpjguitarworks
Call PM me I may be able to help

   I played my F-IV , OM-21 and F-III in that order earlier today and I did check the Martin for bellying (as is my habit). It is there but in no way affects the sound or playability in a negative way. I just have to say here that I don't know why Larrivee did these plates the way they did, but I really like how both of my forum guitars play and sound. :nice guitar:'S

    Good thread, lots of great pics and input.

Need to add that in 67 Martin switched from a maple bridge plate to rosewood.
A REPAIRPERSON,Barefoot Rob gone to a better place
OM03PA
Favorite saying
 OB LA DE OB LA DA,LIFE GOES ON---BRA,It is what it is,You just gotta deal it,
One By One The Penguins Steal My Sanity, Keith and Barefoot Rob on youtube
Still unclrob
#19
12 people ignoring me,so cool
rpjguitarworks
Call PM me I may be able to help

Quote from: gitnoob on July 07, 2010, 01:46:30 PM
I don't think the Martin stigma applies here.   It seems like Larrivee increased the area of the bridge plate in conjunction with taking out one of the lower face braces.

Kevin Ryan uses a giant bridge plate as well....


Well, I think it's apparent that isn't a bridge plate in the traditional sense. I did a search and found this thread. http://www.acousticguitarforum.com/forums/showthread.php?t=161544


This should act more like the nomex double tops rather than a flat wide solid graft. That brace would probably add a lot of stiffness but may not weigh much. In Larrivee's case by simply increasing the width they are adding as much weight as stiffness and by removing tall braces they are lowering the stiffness to weight ratio. It's a fact of life, I'm just telling it how it is, if you like the end result that's fine.

Quote from: unclrob on July 07, 2010, 02:07:29 PM
Martin change the bridge plate in 67 not 69.

Yeah but they started using the large rosewood bridge plates in 69 (serial #242454). Nothing wrong with rosewood bridge plates.

Quote from: cke on July 07, 2010, 01:50:35 PM
Thanks for the info. So why DID Martin use a bigger plate?

Probably as a cheap way to beef up the guitars and decrease warranty work like unclrob said. However that doesn't mean it was a good idea and that's why they don't use giant bridge plates today on their high end guitars. There's no doubt a wider bridgeplate helps prevent the bridge from rolling forward but that doesn't mean it's the most effective way(unless you need the extra mass there). Martin and other companies have made a few changes to their guitars that were either bad ideas or improved some aspect while injuring another. For instance the upper transverse graft (aka popsicle brace) was added to stop the top from cracking around the fretboard and this practice has been adopted by almost all the major manufactures but quite a few luthiers today feel this graft is basically worthless; I believe Mario Proulx said something along the lines of 'the popsicle brace has never prevented a single crack in history.'

And since the title of the thread is "What does the 00 and LS bracing look like?" here are some good pics of the LS bracing.




Quote from: jeremy3220 on July 07, 2010, 11:55:46 PM

Probably as a cheap way to beef up the guitars and decrease warranty work like unclrob said. However that doesn't mean it was a good idea and that's why they don't use giant bridge plates today on their high end guitars.

So if I do manage to buy that D-18GE I am GAS-ing for, will it hold up in the long run?
Chris
Larrivee's '07  L-09 (40th Commemorative); '09 00-03 S.E; '08 P-09
Eastman '07 AC 650-12 Jumbo (NAMM)
Martin   '11 D Mahogany (FSC Golden Era type)
Voyage-Air '10 VAOM-06
-the nylon string-
Goya (Levin) '58 G-30
-dulcimer-
'11 McSpadden

Quote from: cke on July 08, 2010, 12:40:39 AM
So if I do manage to buy that D-18GE I am GAS-ing for, will it hold up in the long run?

I don't see why not.

Newsflash -- I finally have an answer for the original question posed in this thread.   :smile:

I got to peak inside an F-IV 00-03MT  today, and the answer is ... the bracing is different!

Pretty similar to the F-III with the single lower face brace, but the bridge plate is much smaller.

It would be interesting to catalog all the different bracing patterns used by Larrivee.    I used to think all models were braced like an L-body.    But the Parlor, LS, and 00 all appear to have unique bracing.
Gits: 2004 P-01K, 2005 OM-03MT
Uke: Kala KA-ASKS with Larrivee Flamed Koa
Chops: fingerstyle noob

I've been lightening things up in my Lv-03r (yes I like stock Larrivees; I've owned 4 -- I'm just experimenting) and I thought there was an awful lot of bridgeplate. I don't know what to do with it other than really thin out the sections not directly under the bridge shape -- being flat it is hard to judge see changes the way I could with the tall bracing, when modding. Off topic a little-- sorry. Please do not flame me for sacrilege.
L-03 Italian Spruce

Quote from: hadden on July 24, 2010, 11:12:13 AM
... I thought there was an awful lot of bridgeplate. I don't know what to do with it other than really thin out the sections not directly under the bridge shape -- being flat it is hard to judge see changes the way I could with the tall bracing, when modding. Off topic a little-- sorry. Please do not flame me for sacrilege.

Sacrilege!    :bgrin:

I would never mod a Larrivee -- too expensive, but I do experiment with a cheap Chinese guitar.

Simonoff has a book on tap tuning and voicing.     He asserts that the bridge rocks back and forth along the long axis when excited by string energy, and he feels that most bridge plates are poorly designed.

On his guitars, he tapers the edges of the bridge plate to reduce that steep transition at the edge.
Gits: 2004 P-01K, 2005 OM-03MT
Uke: Kala KA-ASKS with Larrivee Flamed Koa
Chops: fingerstyle noob

Quote from: hadden on July 24, 2010, 11:12:13 AM
I've been lightening things up in my Lv-03r (yes I like stock Larrivees; I've owned 4 -- I'm just experimenting) and I thought there was an awful lot of bridgeplate. I don't know what to do with it other than really thin out the sections not directly under the bridge shape -- being flat it is hard to judge see changes the way I could with the tall bracing, when modding. Off topic a little-- sorry. Please do not flame me for sacrilege.

I wouldn't bother thinning down the bridge plate much because you are going to be removing more stiffness than mass(not an effective way to lighten things up).

Quote from: gitnoob on July 24, 2010, 04:00:54 PM
Simonoff has a book on tap tuning and voicing.     He asserts that the bridge rocks back and forth along the long axis when excited by string energy

It's called the long dipole. The bridge actually vibrates along many different axises: The greatest volume producer being the monopole axis which produces the main top mode.

Quote from: jeremy3220 on July 25, 2010, 01:31:25 AM
It's called the long dipole. The bridge actually vibrates along many different axises: The greatest volume producer being the monopole axis which produces the main top mode.

We may be talking about two different things.   It sounds like you're talking about vibrational modes of the top.   I'm talking about energy transfer from strings to bridge to top.

When the strings vibrate, they're actually compressing and expanding, which rocks the bridge back and forth along its long axis.    Simonoff believes one should maximize the energy transfer by giving the bridge more freedom of movement.     This is a different concept than controlling the resonant frequencies of various vibrational modes of the top.
Gits: 2004 P-01K, 2005 OM-03MT
Uke: Kala KA-ASKS with Larrivee Flamed Koa
Chops: fingerstyle noob

Quote from: gitnoob on July 25, 2010, 05:21:49 AM
We may be talking about two different things.   It sounds like you're talking about vibrational modes of the top.   I'm talking about energy transfer from strings to bridge to top.

When the strings vibrate, they're actually compressing and expanding, which rocks the bridge back and forth along its long axis.    Simonoff believes one should maximize the energy transfer by giving the bridge more freedom of movement.     This is a different concept than controlling the resonant frequencies of various vibrational modes of the top.

It's the same thing. The bridge rocking in that manner is what forms the long dipole mode(as opposed to the cross dipole mode). Think about what dipole means and imagine what happens when the bridge rocks back and forth; the area in front of the bridge will dip and at the same time the area behind will rise and as the bridge keeps rocking this goes back and forth therefore producing a dipole type movement.

                  "Dipole" is an interesting word to use in describing the top/bridge movement.

Does this mean "equal" movement in each direction, as far as force. Or is there a simpler way to explain this to all of us who are trying to understand what y'all are referring to here?

I believe the "poles" he's referring to are relative to various vibrational nodes.    A different concept than a rotational axis, but I wouldn't be surprised if the axis is one of the nodes.

Regarding vibrational modes, there are some good pictures and videos in this thread:
http://acousticguitarforum.com/forums/showpost.php?p=2284132&postcount=25

BTW, one of the interesting results of studies like these is that there's no bass side or treble side to a guitar top.     So Martin lefties can be converted to righties as easily as Larrivees.

The effect of symmetrical vs asymmetrical bracing is different than what we all assumed.    Rather than "balancing" bass and treble response, it really just changes the symmetry of some of the vibrating modes -- I have no idea what effect, if any, that has on tone.
Gits: 2004 P-01K, 2005 OM-03MT
Uke: Kala KA-ASKS with Larrivee Flamed Koa
Chops: fingerstyle noob

The link gitnoob posted is a good find and illustrates the poles. Mode just refers to the type of movement not necessarily a specific vibrational frequency. However what you are seeing in those pics is the natural resonant frequencies of the top occurring in different modes. You can see from the pics that the bridge does act as an axis.

In the first picture you are seeing the main resonant mode of the top, this is the monopole mode where the bridge moves up and down as a unit. This type of movement is the greatest contributer to volume because it acts like an air pump and usually couples with the resonant frequency of the air chamber because it tends to be an octave above it.

The 2nd pic is the cross dipole mode, this is the result of the bridge rocking(vibrating) from side to side. In this mode the bass side will rise will the treble side falls and this goes back and forth.

The 3rd pic is the long dipole mode, this is the result of the bridge rocking/rotating/vibrating from front to back. This is where the area in front of the bridge will dip and at the same time the area behind will rise and as the bridge keeps rocking this goes back and forth therefore producing a dipole type movement.

Then you start to get into tripole modes and others I don't know the names of.




Here's a thread where Alan Carruth explains some of the significance of each mode: http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25759&start=0&st=0&sk=t&sd=a
"I think the location for the peaks on scalloped bracing have to do with controlling the frequencies of the modes above the 'main top' mode. Basically, you're working with the stiffness of the top/bracing system in different areas, and the effect on the mode frequencies will depend on whether the brace is bending or not in that location for that mode.

The lowest four modes of the top do most of the work in producing sound, and particularly the 'main top' mode, which is thought by some to be the most important sound producer all the way up to 1000 Hz. That's the mode that works like a loudspeaker, with the whole lower bout moving in and out.

On loudspeakers they make the edges really loose, and try to get the center to move like a piston, with no bending. We can't do that: you need a certain amount of stiffness at the edges, and anyway, we're not trying for the sort of 'flat' frequency response the loudspeaker people are. One researcher, Richardson in Wales, has shown via computer models that a top that is loose in the center will actually move more air in the 'main top' mode than one that is loose around the edges, assuming both tops are stiff enough to take the loads. Scalloping reduces that central area stiffness, and thus accentuates the power of the 'main top' mode, as well as the 'main air' mode that it drives.

The next three modes up also contribute to the tone, even if they are not as effective at producing power as the main top mode.

From what I can see, the 'cross dipole', which is usually the next higher one in pitch, tends to be a 'loser': it's so much less effective than the 'main top' mode that you'd rather not have it stealing energy. You do this by making the areas of the top on either side of the centerline, about halfway to the edge, stiffer, to move the cross dipole pitch up away from that of the 'main top' mode. Meyers (iirc) showed that guitars that had a narrow 'main top' peak in the spectrum tended to sound 'harsh', and too low a cross dipole pitch contributes to that by stealing energy and cutting off the main top mode. So, having the X braces peaked outside of the bridge wings can raise the cross dipole pitch, and make the 'main top' spectral peak broader. I've noticed on the guitars that I've measured that this seems to contribute to a 'full' or 'solid' sound.

The 'long dipole' could be a 'waster' like the cross dipole, but it often couples strongly with one of the inside air resonant modes, and ends up producing a significant amount of sound; often around A on the high E string, where nothing much else is going on. Loosening the area in the center of the top behind the bridge with scalloped tone bars will drop the pitch of the top 'long dipole' mode.

The fourth mode, the 'cross tripole' may or may not show up on any given steel string guitar. It's a power producer, though; generally up around 500 Hz (C on the high E). The peaks on the lower end of the X ,and the tone bars, are in places that probably help to move that one upward in pitch.

The important thing to think about is that each system of shaping the bars tends to establish a certain relatinoship between the mode pitches, and thus to form the spectrum of the guitar's output. That's why scalloped, tapered and flat bracing tend to sound different.

Also, of course, there's no free lunch. Loosening up the top in the center is structurally risky, and also can, if not done right, give too much bass and less sustain. All of this is pretty complicated, and good, stable, balanced, and 'clear' sounding instruments can be built with all sorts of bracing. Still, knowing the strengths and weaknesses of each pattern, and how they tend to sound, can help you build what the customer wants, even if that's just you."


And to explain why the term "pole" is used when discussing modes...

Imagine you drill a hole through a thin sheet of something like a piece of table cloth or guitar top. Then slide a small pole though and glue it in position. If we were to use just one pole in the center of the sheet and someone held the edges while we moved the pole up and down(perpendicular to the sheet) we'd have a monopole type movement. If we inserted two poles, one on each half of the sheet, and moved them back and forth in opposing directions we'd have a dipole type movement.

If you look at the pics you can imagine a pole running perpendicular to the top through the dark spots. So in this one you've got two dark spots therefore two poles(dipole).



   Jeremy, the bracing on my new Crafter TV 200/NV (solid wood, Engelman top, HOG back & sides, "modified scalloped "T" bracing) looks virtually like your pic, as far as the main bracing. When I tap the top in the upper bout, not much response. Move to the lower, get a response that would compare to your diagram. Very responsive. Is this diagram representative of a "T" bracing, as it looks, or generic for an "X" bracing.
   Didn't look inside with my indicator mirror, but my luthier drew a quick pic of what "T" bracing looked like & how effective it was. The bracing on different guitars has always been an interesting subject to me. This description you provide really clarifies alot & one I'll save on my PC. My custom Martin OOO-15s has an "A" bracing, which is common on this type of guitar(?).
   Learned alot from all here & has some very interesting posts. J, think this is the longest & one of the best I've seen from you. Thanks for posting it. Explains alot.
     
'11 Martin OM18V Engelmann Custom
'11 Martin D-18 Adirondack Custom
'12 Martin MFG OM-35 Custom
'07 Larrivee OOO-60(Trinity Guitars)
'13 Larrivee OM-03 "Exotic"RW Custom(Oxnard C.S.)
'10 L.Canteri OO1JP Custom(IS/IT.WALNUT)


So it seems I have come to doubt, all that I once held as true

Quote from: gitnoob on July 25, 2010, 01:55:10 PM
I believe the "poles" he's referring to are relative to various vibrational nodes.    A different concept than a rotational axis, but I wouldn't be surprised if the axis is one of the nodes.

Regarding vibrational modes, there are some good pictures and videos in this thread:
http://acousticguitarforum.com/forums/showpost.php?p=2284132&postcount=25

BTW, one of the interesting results of studies like these is that there's no bass side or treble side to a guitar top.     So Martin lefties can be converted to righties as easily as Larrivees.

The effect of symmetrical vs asymmetrical bracing is different than what we all assumed.    Rather than "balancing" bass and treble response, it really just changes the symmetry of some of the vibrating modes -- I have no idea what effect, if any, that has on tone.
Obviously it's a good effect  :wink:
Chris
Larrivee's '07  L-09 (40th Commemorative); '09 00-03 S.E; '08 P-09
Eastman '07 AC 650-12 Jumbo (NAMM)
Martin   '11 D Mahogany (FSC Golden Era type)
Voyage-Air '10 VAOM-06
-the nylon string-
Goya (Levin) '58 G-30
-dulcimer-
'11 McSpadden

Quote from: BluesMan1 on July 26, 2010, 12:15:08 PM
   Jeremy, the bracing on my new Crafter TV 200/NV (solid wood, Engelman top, HOG back & sides, "modified scalloped "T" bracing) looks virtually like your pic, as far as the main bracing. When I tap the top in the upper bout, not much response. Move to the lower, get a response that would compare to your diagram. Very responsive. Is this diagram representative of a "T" bracing, as it looks, or generic for an "X" bracing.
   Didn't look inside with my indicator mirror, but my luthier drew a quick pic of what "T" bracing looked like & how effective it was. The bracing on different guitars has always been an interesting subject to me. This description you provide really clarifies alot & one I'll save on my PC. My custom Martin OOO-15s has an "A" bracing, which is common on this type of guitar(?).
   Learned alot from all here & has some very interesting posts. J, think this is the longest & one of the best I've seen from you. Thanks for posting it. Explains alot.
     

Well the link gitnoob posted isn't really related to how responsive a top is. All guitars vibrate and the diagrams are more about how they vibrate(modes).  It's true though the upper bout is always less responsive and more or less so depending on the guitar. Some guitars use a massive upper transverse brace and a graft(aka popsicle brace) where the 1927 0-18 I owned had a UTB that was about 1/4" wide and no popsicle brace; there's no surprise the 0-18 was very responsive.

When you refer to T bracing you're talking about the cross sectional profile right? Whether or not this bracing in the diagram uses that type of profile isn't that important. All guitars tend to vibrate in roughly the same pattern though the frequency at which the modes occur will be different.

Powered by EzPortal