Guitar Stand Foam Tubing

Started by ark, June 15, 2008, 03:36:17 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

I need to replace the foam tubing on a guitar stand. Anyone have an idea where to find appropriate foam tubing material? I've tried Guitar Center and Home Depot so far without any luck. I have used the yellowish surgical tubing on stands in the past, but I'm not sure if that material is safe for the typical guitar finish.
Thx,
Al

         It will depend on the guitar's finish. Vinyl is not so good in general. I have used small "armaflex" foam pipe insulation. I think though whatever you use you need to keep an eye on it and see if there is any reaction to the material or the guitar.  Surgical tubing will eventually decompose and  liquidizes so then it will really be glue waiting to stick to your guitar. All plastics, unless they have specific inhibitors will break down under U.V. Light eventually.
        If you are keeping a real expensive guitar on a stand for long periods, it may be best to make a wooden one with soft flannel cotton liners on the points where the neck and body touch the stand. I keep my LSV-11 in the case most of the time. It is on a wall hanger right now but not for long and it will be wiped down before returning to it's case.
        My old classical and others stay out all the time. I even hang the old Gibson on a vinyl tubing coated hanger but the finish couldn't be any more beat up than it already is.  :blush:   Danny

A search for closed cell foam tubing turned up the following possibility:

http://www.allegromedical.com/daily-living-aids-c519/closed-cell-foam-tubing-for-building-up-tool-and-utensil-handles-and-increasing-softness-p192988.html

So maybe medical supply stores might be a source for suitable tubing.
Al

Powered by EzPortal