Any links for shining up a L-03R?

Started by campfirehero, May 24, 2008, 11:37:26 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

I want to buff up my L-03R, I remember seeing a post or link somewhere around here on materials used and a walkthrough...

thanks!

Here is a recent one:

Buffing Link

Do a search for Orsino, meguiar's or meguiars, steel wool, buff or buffing. You will get a lot of reading material.
Don

Larrivée D-09BW
Larrivée LV-03BW
Larrivée OM-03K
Larrivée LV-03-12
Martin D-18 RIP :crying:
Mossman Tennessee 12
Gretsch Chet Atkins DC
Gretsch Tennessee Rose
Fender Am. Stratocaster
Guild X-170T Manhattan
Fender 90s Telecaster Custom
Guild Starfire 5
Gretsch 5422 12 String
G&L ASAT Deluxe Semi

It's in the technical FAQ. Note that Scratch X has silicone in it. You can get real guitar polishing compounds from Stew Mac.

Well, hello Donny old boy! (D. Birchett) How's the wife and kids?
I just sold an LV03R that I did the Orsino/Meguiars method to one of the new members, Tad (who seems to be acquiring Larrivees w/a passion!)
I think it was the best (of four) 03 polishes I've done.   I have settled on an OM03SP (all sapele special edition)...
but, to the topic at hand...
why was it that "we" worry about/don't do the Meguiars Step 3--with silicone :crying:--anymore?!  I don't (often  :tongue:) lick my guitar, was there another reason?
Not enough RAM in the old grey matter these days  :wink:  Maybe Peter (HI!) will still be looking here and chime in.

I thought the reasoning for not using a silicon based product was because the silicon gets in the wood , and would really mess you up if you wanted to stain or refinish the guitar at some point .  I think that's what I remember reading ....LOL
Martin 000-28 H Ambertone Custom
Larrivee 00-09 Wildwood Custom
Ovation Classical
Ovation Celbrity
Fender Nylon



Larrivee OMV-03R   SOLD
71 GIbson ES-355   Long gone
68 Gibson  J-45 Gone in the 70's
Fender Starcaster..sold in the seventies
72 Fender Tele Deluxe gone ,

Quote from: snkysnake on May 28, 2008, 01:52:30 PM
I thought the reasoning for not using a silicon based product was because the silicon gets in the wood , and would really mess you up if you wanted to stain or refinish the guitar at some point .  I think that's what I remember reading ....LOL

That's right


Good to hear from you Bernie. Still have the 12 string?

The reason that we stopped doing the 3rd step is that it is a wax and also because it contains silicones. Peter Cree recommentded that we not use wax.
Don

Larrivée D-09BW
Larrivée LV-03BW
Larrivée OM-03K
Larrivée LV-03-12
Martin D-18 RIP :crying:
Mossman Tennessee 12
Gretsch Chet Atkins DC
Gretsch Tennessee Rose
Fender Am. Stratocaster
Guild X-170T Manhattan
Fender 90s Telecaster Custom
Guild Starfire 5
Gretsch 5422 12 String
G&L ASAT Deluxe Semi

Yes, Don, still have the D03-12--incidently, my first Orsino-ized finish.  (It goes to my daughter when she graduates--but that's a secret until then  :whistling:)

I couldnt bring myself to NOT do the third step; I didnt like the fact the polish seemed to continually smudge unless I put the 3rd Step on.  I do remember Peter Cree cautioning something about a future re-finish being problematic if the wax was applied.  I should look in my files--there was something about mineral spirits (?) to remove the silicone based wax if one wished to re-do the entire process.

campfirehero, I'm getting ready to gloss my Martin 000-15S, did a search at UMGF http://theunofficialmartinguitarforum.yuku.com/

http://theunofficialmartinguitarforum.yuku.com/search/text/?q=stew+mac+polishing+&name=&searchdate=0&beforeafter=after&orderby=relevance&boxes%5B%5D=1&boxes%5B%5D=2&boxes%5B%5D=3&boxes%5B%5D=5&boxes%5B%5D=6&verifyCode=ynac&advanced=1


Meguiars products have been removed from the unofficial "approved" list as they* contain silicone. *Meguiars commercial line sold to auto body shops is said to be non silicone so should be safe. Some have tried Stewart McDonald's Colortone Polishing Compound's for high gloss finishes #3 Fine and #4 Swirl Remover and found it to be a good alternative.

http://theunofficialmartinguitarforum.yuku.com/topic/1030



"Our polishing compounds remove fine sanding scratches from instrument finishes and plastic surfaces, while leaving no silicone residue to hamper future refinishing. Formulated to be applied by hand with a soft cloth, or with foam rotary polishing pads. Use Swirl Remover for a high luster on new or aged finishes."

http://www.stewmac.com/shop/Finishing_supplies/Abrasives,_polishes,_buffers/ColorTone_Polishing_Compounds.html


I believe a wet/moist T shirt is used to apply the product in not too large of areas (4" x 4" ? although I may try a bit larger) to prevent it from drying on the guitar with a final once over to make sure the gloss is consistent.


Use the search function just to be sure for yourself. I'm waiting for my #3 Fine and #4 Swirl Remover to arrive and will see how it goes.  Not an endorsement YMMV.


Good luck, Dave     :donut :donut2 :donut :donut2 :donut  :coffee

2007 Gibson Les Paul Studio
2010 Gibson SG Standard
2010 Gibson USA Angus Young SG
2011 Gibson 60's Tribute SG
2007 Martin 00015 S
2010 SilverCreek T170
1986 Fender Champ12
1994 MesaBoogie .50 Caliber+
2010 Marshall Class 5

Hey Bernie -

That LV-03R I got from you is a great guitar - both in sound and in appearance. I guess I didn't realize you glossed it - it isn't really glossy, but is a little shinier than my OM - not owning anything above an -03, I can't compare to a factory gloss job.

I wonder how many people have had their guitars refinished? Maybe if I owned some fancy -09 or -10 model.  Although I want to keep mine looking good, I look at at Tommy E. or SRV, or many other incredible guitarists, and I would be happy to run a belt sander with some 60 grit across all of them if it guarranteed I could play like them -  :humour:

Tad
Bunch of Larrivees - all good -
and a wife that still puts up with me, which is the best -

Quote from: naboz on May 28, 2008, 12:04:13 PM
snip...  I have settled on an OM03SP (all sapele special edition)...
but, to the topic at hand...snip

Do you plan to gloss up your future OM03SP?   :nice guitar:

If so, please share pics, as I just got an L-03SP and would love to see how this would look.  Looking at my sapele git, I can't help but think that the grain would be stunning if done w/gloss finish. 
Scott

RS-2

Great, Tad!  Glad everything worked out.  Yeah, you mention a couple of fire-finger owners there  :bowdown:
I have had my OM-SP since the weekend we traded,
and yes L-fan, I have already done the polishing.  The top came out the best.  For the sapele, it seems to have really brought out the crossing grain, giving it a shimmering depth like flamed koa.  Wish I would have known about the Stew-Mac product, I would have liked to try that with my buffer.  Nothing wrong with my results, but the photos of the other guitar using Colortone seem really nice.
I will try to post pics, but end of the year activities (school) and evening work may delay that request.

Powered by EzPortal