FS: (UK / Europe) Marshall JCM 900 Master Volume 2501 1x12 Combo

Started by mrrinse, January 18, 2006, 08:56:38 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Hi,
To start, this is in London, UK and collection is preferred. I suspected international postage, especially beyond Europe, would be financially unviable, though I'm prepared to do it if someone's prepared to pay.
An acoustic forum seems like an odd place to advertise it, but here we go (before it goes to e-bay):

All valve Marshall JCM 900 2501 High Gain Master Volume 1x12" 50 Watt combo.

Used around 20-30 times. I don't have the amp to hand, but it's possible that one of the pots is a little scratchy - reflected in price. Overall very good condition - I doubt you'll find one that's seen so little use anywhere.! The valves should have plenty of life left.

Can be used as head, e.g. for a 4x12 stack. 2 volumes (footswitchable), 2 gains (goes up to 20!), 4 band eq (hi-mid-low-presence), low-power mode (25W), recording output, effects loop, top & easy carry side handles, etc. The Master Volumes had an extra ECC83 (12AX7) vavle (3 in total) in the preamp for extra gain; 2 EL34 valves control the power section. Celestion G12-T75 speaker, I believe.

Perfect rock / metal amp for practice, rehearsals, studio and gigging. 8.7/10 rating on http://www.harmony-central.com/Guitar/Data/Marshall/JCM_900_2501-1.html.

This amplifier contains two separate Master Volume controls which allow you to dial in one set volume for your normal sound, and then switch to a second volume control for quieter or louder parts. In my experience, most people tended to use this second volume feature as boost for guitar solos.

Another useful feature is the HI/LOW output switch on the back of the combo. This allows you to switch from 50 watt, HI to 25 watt, LOW power in order to reduce the overall volume of the amp. This is useful for quieter bands, or studio recording where you may wish to have a bit less volume, but still have the amp turned up to get that cranked valve tone.

The control panel on the front is set out as follows (I can see the amp right now, but I'm fairly sure this is right):

Input socket
On/Off switch
Standby switch
Preamp volume control
Gain volume control
Master volume control A
Master volume control B
Treble EQ control
Middle EQ control
Bass EQ control
Presence EQ socket
Volume A/B switch
Footswitch socket

The back of the amplifier contains the following:

HI/LOW output switch
Effects Send socket
Effects Return socket
DI Output (Recording compensated) socket
DI Output (Normal) socket
Twin Speaker Output sockets
Power lead input socket

Drop me an e-mail if interested: daniel_burneNOSPAM@yahoo.com (just remove NOSPAM)

Dan
Larrivees LV-09, L-05MT and P-03; Lowdens S-7 (1988) (FOR SALE), O-12 (2004)  and Baritone (2009); McIlroys A25c (2003) and A25c custom (2010); Sada Yairi Soloist (1965) - nylon string; Parker NiteFly with Roland GK-2a MIDI pickup; PBC superstrat and 5 string bass; AER Compact 60.

Powered by EzPortal