Looking at an oo-40

Started by tiogajoe, November 07, 2024, 10:05:03 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

I had an issue with a new larrivee once where I heard a distinct rattle. Took it back to the shop and the tech loosened the rattling string, took out the bridge pin and pulled up on the string while pushing the pin back in. This made sure the ball of the string was tight up against the pin. Turns out it was hanging low and the ball of the string was the cause of the rattle.
Larrivee P-03
Larrivee Forum VII
Larrivée OM-03R maple leaf inlay

Quote from: StringPicker6 on November 16, 2024, 08:17:43 PMI had an issue with a new larrivee once where I heard a distinct rattle. Took it back to the shop and the tech loosened the rattling string, took out the bridge pin and pulled up on the string while pushing the pin back in. This made sure the ball of the string was tight up against the pin. Turns out it was hanging low and the ball of the string was the cause of the rattle.
I'm going to try that. I just ordered a set of graph tech pins from sweetwater.

Quote from: tiogajoe on November 16, 2024, 06:24:20 PMI think Nick is right. He may have taken a hair to much off the saddle. The room where I keep my guitars is 45% RH. A straight edge across the lower bout shows a slight belly at the bridge. I also have been playing it so much that my wrist hurst a bit. I am not used to have my arm closer to my body on a smaller guitar. I would imagine that will go away with time.
Well that settles that. Sounds like you're right!
2004 Larrivee OM-03R
2018 Larrivee D-40 SOLD
2004 Larrivee D-03R SOLD


tiogajoe, congratulations on your new 00 and I'm sure you'll get it sorted out. And IMO you'll adjust to the smaller body size quickly.  :thumbsup

Ok Guys. Help me out!  I'm having a hard time adjusting to my new guitar. It's almost like I have to learn to play again.  My finger placement is all out of Wack.  The discomfort in my wrist is definitely arm positioning which I'm getting sorted out. I'm kind of having a bit of buyer remorse. Do you eventually get used to these things? I plan on going back and forth between my other guitars that are 14 frets.  So far that seems easy.

Don't let buyer's remorse cloud your judgment. I don't know if this will help but here's my experience and a couple of suggestions to avoid future seller's remorse.

From 1977 to 2004, my only guitar was a 14 fret, Martin Dreadnought (D-35) with a 25.5" scale. In 2004, I bought my first Larrivee, a 12 fret parlor with a 24" scale. My last three acoustics have been 12 fret guitars with scalloped bracing including two short scale (Spruce and Mahogany 000 slot head Martin and an all mahogany 00-24 Larrivee) and a long scale (Moonwood and Walnut LSV Larrivee).

Suggestion number 1
Both of these guitars were originally strung with medium gauge strings. With one exception, all of my guitars are now set up and strung with light gauge strings. If I was in a band or I was a bluegrass flatpicker competing with a banjo or dobro player, medium gauge strings would make sense to drive the top and boost volume. Light gauge strings are much easier on the hands and easier to chord and bend. I also feel that scalloped bracing helps with responsiveness.

Suggestion number 2
Give it time. The shorter scale takes a little time to get used to but you don't have to reach as far to make chords and I've found it easier to make full and partial barre chords. Even though my 14 fret guitars get plenty of playing time, I gravitate to my 12 fretters over half the time. 

I've spent a lot of time getting familiar with my 00-24 over the past month. I will be changing the strings and modifying the set up for the first time later this month.

Quote from: teh on November 19, 2024, 09:27:27 AMDon't let buyer's remorse cloud your judgment. I don't know if this will help but here's my experience and a couple of suggestions to avoid future seller's remorse.

From 1977 to 2004, my only guitar was a 14 fret, Martin Dreadnought (D-35) with a 25.5" scale. In 2004, I bought my first Larrivee, a 12 fret parlor with a 24" scale. My last three acoustics have been 12 fret guitars with scalloped bracing including two short scale (Spruce and Mahogany 000 slot head Martin and an all mahogany 00-24 Larrivee) and a long scale (Moonwood and Walnut LSV Larrivee).

Suggestion number 1
Both of these guitars were originally strung with medium gauge strings. With one exception, all of my guitars are now set up and strung with light gauge strings. If I was in a band or I was a bluegrass flatpicker competing with a banjo or dobro player, medium gauge strings would make sense to drive the top and boost volume. Light gauge strings are much easier on the hands and easier to chord and bend. I also feel that scalloped bracing helps with responsiveness.

Suggestion number 2
Give it time. The shorter scale takes a little time to get used to but you don't have to reach as far to make chords and I've found it easier to make full and partial barre chords. Even though my 14 fret guitars get plenty of playing time, I gravitate to my 12 fretters over half the time.

I've spent a lot of time getting familiar with my 00-24 over the past month. I will be changing the strings and modifying the set up for the first time later this month.

Thank Teh. I am going to get the guitar set up when I get the other saddle from Nick. I also have a set of tusq bridge pins on the way. The plastic ones seem very flimsy.  I also find it strange that for an 13/4" nut the fingering feels narrow? This is giving me the most trouble as far as accurate finger placement.

When you have the set up done, discuss if different string spacing can be cut on on the nut.

Quote from: tiogajoe on November 19, 2024, 10:17:48 AMI also find it strange that for an 13/4" nut the fingering feels narrow? This is giving me the most trouble as far as accurate finger placement.

Yikes. I'd love to see a pic or at least measure the distance between the E strings and the edge of the fretboard.

My assumption has always been that Larrivee nut slots are cut wider than most others brands. I have a Taylor 322 and the E to E spacing is about 1 mm narrower compared to my Larrivee OO's.

PS - I've been following this thread without much to say, but let me offer my belated Congrats and Happy New Guitar Day! I've managed to acquire three of OO's which is the perfect guitar for me.  :beer

Larrivee OO-05 • Larrivee OOV-03 SS • Larrivee OO-44  • Taylor 322ce • Strat • Soundcloud https://soundcloud.com/jpmist

Quote from: Myopic Squirrel on November 19, 2024, 11:04:42 AMWhen you have the set up done, discuss if different string spacing can be cut on on the nut.

I will look into that. Good idea.

Quote from: jpmist on November 19, 2024, 11:50:20 AMYikes. I'd love to see a pic or at least measure the distance between the E strings and the edge of the fretboard.

My assumption has always been that Larrivee nut slots are cut wider than most others brands. I have a Taylor 322 and the E to E spacing is about 1 mm narrower compared to my Larrivee OO's.

PS - I've been following this thread without much to say, but let me offer my belated Congrats and Happy New Guitar Day! I've managed to acquire three of OO's which is the perfect guitar for me.  :beer



Jpmist, I have the same you do...about 3mm. I'm showing about 2mm to the bottom of the low E string at the 12th fret.

Quote from: tiogajoe on November 19, 2024, 12:14:43 PMJpmist, I have the same you do...about 3mm. I'm showing about 2mm to the bottom of the low E string at the 12th fret.

We'll now I'm curious what other guitars you're used to and what their nut spacing is? I don't have that wide a span of experience with other brands. Could the thinner Larrivee neck be giving you the "too crowded" feel you have?
Larrivee OO-05 • Larrivee OOV-03 SS • Larrivee OO-44  • Taylor 322ce • Strat • Soundcloud https://soundcloud.com/jpmist

If things feel uncomfortable at the nut, check the tuning between the open string and 1st frets. If there's any deviation (there usually will be) you can probably take the nut slots down slightly, which feels wonderful.

 This is something that can easily get messed up so do research before adjusting. I just find that most factory guitars are left high at the nut and it gives a tighter than necessary feel when fretting open chords.

Quote from: jpmist on November 19, 2024, 02:09:21 PMWe'll now I'm curious what other guitars you're used to and what their nut spacing is? I don't have that wide a span of experience with other brands. Could the thinner Larrivee neck be giving you the "too crowded" feel you have?

My other guitars are all Yamahas. I have an FG5, LL16m, and a AC3m DLX.  All of them are Mahogany. They all have a 13/4" nut except the AC3 which has a 1 11/16". The Finger placement issue I've been having is sorting itself out. I spoke with Nick and he feels the oo 40 length and small size is giving me my problems.  He suggested going to an ooo or the sd-40?  The oo 40 is just over 38" long. The ooo and sd are 40.5 inches. That is right in line with my current herd of guitars. It was very generous of Nick to offer this as a solution.  I went into purchasing this guitar just wanting a smaller bodied guitar.  I did go back and forth between the 00 and 000. He does have ooo's in the simple 6 series and an 000-o3m which I'm not familiar with.  The Sd seems to be an interesting animal.  It has a lot of fans in the FB group. He has an SD-40r with a moon spruce top. The Sd is just a tad smaller than my FG5 but its body is 21" compared to 20" on the FG. I don't have an EIR is my herd, so the SD is tempting.  Anyway, more to think about. If I am honest with myself, I do feel the oo size is probably not a good fit for me. I did play a Martin ooo-17 14 fret and really liked it. I just couldn't get past the plain look. That's what lead me to Larrivee for the same kind of money and a hard case to boot. My AC3 is pretty much an OM cutaway so a Larrivee OM really isn't adding to any Diversity in my guitar herd.

Buying guitars online is such a crap-shoot, it's great that your guy Nick is working with you.

Armchair spitballing, my first thought is that going from Dreadnoughts to an OO has changed the wrist angle of your fretting hand which may be what's taking used to. But I suppose that depends on how often you play up the neck as opposed to strumming. I'm surprised you haven't commented on the change in tone to a smaller body. I prefer it, but those used to dreadnoughts and larger might not.

I'm likely wrong but I thought the SD had a wider 1 13/16" nut. I once owned a neck that width and could never get used to the stretch involved in making C and G shapes. I do a D/C shape often up the neck and making that pinky reach the A string was often hit or miss. I'd recommend the OOO as I had one once. It being a 12 fret, it had a wonderful full tone.

Best of luck with it!
Larrivee OO-05 • Larrivee OOV-03 SS • Larrivee OO-44  • Taylor 322ce • Strat • Soundcloud https://soundcloud.com/jpmist

Quote from: jpmist on November 20, 2024, 03:50:47 PMI'm likely wrong but I thought the SD had a wider 1 13/16" nut. I once owned a neck that width and could never get used to the stretch involved in making C and G shapes. I do a D/C shape often up the neck and making that pinky reach the A string was often hit or miss. I'd recommend the OOO as I had one once. It being a 12 fret, it had a wonderful full tone.

SDs are 1 & 3/4 now. Used to be 1 & 7/8.
Even their 3 baritone models (BT03, 03R & 40R) are all 1 & 3/4 nut width now. Used to be 1 & 7/8.

Quote from: Queequeg on November 20, 2024, 05:40:24 PMSDs are 1 & 3/4 now. Used to be 1 & 7/8.

Ah, thanks for the correction. I recall they were wider than 1 3/4" in the past . . .
Larrivee OO-05 • Larrivee OOV-03 SS • Larrivee OO-44  • Taylor 322ce • Strat • Soundcloud https://soundcloud.com/jpmist

Nick has located an 000 40r and he has an 000-03m that he special ordered. It has the older style bracing.

Quote from: tiogajoe on November 20, 2024, 08:33:59 PMNick has located an 000 40r and he has an 000-03m that he special ordered. It has the older style bracing.

I went with the ooo-40r that Nick located. It's at Larrivee now. They will ship to Nick and so on. Once again, I cannot say enough good things about Nick. Outstanding customer service! Great Guy.

Powered by EzPortal