Center seam is visible; am I overreacting?

Started by mynameissang, July 06, 2013, 07:19:19 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

I've had my L-03R JCL for 2 weeks now, and I noticed today that the center seam from the soundhole to the lower bout-end is visible. I'm not sure if it was always like that, or if it has recently developed.
I've been keeping it in the room out of the case, where the temp has stayed around 75-78F with an RH around 50-58%. This is Georgia in the summer, so it stays pretty warm around here, but the RH doesn't shoot up too crazily.
There is definitely not a crack in the wood; it is at most a seam separation, if even that.
My question is if I am overreacting and what I am seeing is perfectly normal, or if maybe there is a cause for concern. And if there is a cause for concern, what do I need to do? I can't imagine that the guitar is under-humidified, but would a seam separation happen due to over-humidification?
Here are some pictures:

Soundboard side



Lower-bout side





Thank you for any help.

   Looks strange to me. I think I'd contact the dealer if you are not happy with this guitar. But someone else may say it's nothing to be bothered about.
   I just have not had any of my Larrivee spruce tops look like that.

Very gently push on the top on each side of the seam, an inch or so to the right and left seam and about halfway between the bridge and tail. See if you can detect any movement or "give" on one side and not the other that would indicate the seam is separating.

And not to disparage your dealer in any way, but you may want to get the opinion of a qualified, impartial third-party repair person.

Calling Dr. Unclrob, calling Dr. Unclrob! If the uncl can't help you. nobody can. He's in Tallahassee (where it's humid) and has the best advice of anyone (IMO). He is a terrific asset here and will help you figure out what is going on.

As for my opinion (that's all it is): keeping the guitar in its case is a better idea than on the wall.

f
Larrivee L-03 w/Gotoh 381 tuners (African Mahogany/Sitka)
Collings OM2Hc (EIR/Sitka)
Schenk Ophirio (Sapele/Cedar)
Bourgeois 00 Custom (Mahogany/It. Spruce)

That's normal, and nothing to worry about.  Some soundboards seems just absorb glue differently and show it slightly despite a perfect match.

Quote from: Matthew Larrivee on July 06, 2013, 09:49:26 PM
That's normal, and nothing to worry about.  Some soundboards seems just absorb glue differently and show it slightly despite a perfect match.

What he said. :bowdown:
A REPAIRPERSON,Barefoot Rob gone to a better place
OM03PA
Favorite saying
 OB LA DE OB LA DA,LIFE GOES ON---BRA,It is what it is,You just gotta deal it,
One By One The Penguins Steal My Sanity, Keith and Barefoot Rob on youtube
Still unclrob
#19
12 people ignoring me,so cool
rpjguitarworks
Call PM me I may be able to help

I can't see any give along the seam when pressed gently. I'll go with the expert input that it's normal. This is just my first and only good guitar, and I'm still trying to figure out what to expect in owning an all-solid-wood guitar. Perhaps I'm just being paranoid  :tongue:
I probably won't be able to help myself periodically checking the seam, but it doesn't seem like it is anything to worry about, as mentioned.

Thank you for the comments on the matter  :smile:

However... as for the keeping in the case versus out of the case...
I had read on the warranty care booklet that it is better to keep the guitar out of the case on a guitar stand, so that air will have a chance to circulate through the guitar, provided that the humidity is kept in control. However, the temperature here is quite a bit above the standard room temperature, I believe (it usually stays ~78F in the room where the guitar is kept), but the humidity stays at a pretty constant 50-55%. Are there any thoughts on that matter?

Quote from: mynameissang on July 07, 2013, 01:27:12 AM... I'll go with the expert input that it's normal...

It's not just an expert opinion...it's from the guy who builds these guitars!  :bowdown:

Kinda reminds me of that scene in Annie Hall where some movie patrons are standing in line droning on about Marshall McLuhan, and then Woody Allen pulls McLuhan out from behind a move poster and McLuhan says "I heard what you were saying! You know nothing of my work!"  :laughin:

Powered by EzPortal