Bridge for a CA Bluegrass Performer

Started by Celticjam, May 13, 2008, 10:25:41 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

I just picked up a CA Bluegrass Performer, "blemished", actually pretty scratched up without a nut, bridge, tuners or saddle.  I talked with CA and they wouldn't sell me a bridge. 

I think the tuners, saddle and nut are the least of my problems.  Finding a carbon fiber, graphite or micarta bridge might be the answer, but I can't seem to locate one.  Anybody have an idea where to get one?  I may wind up getting an ebony one but I'd rather stick with an un-natural material to go with the un-natural guitar.

Thanks,
Kevin

You might try contacting Rainsong or maybe Graftech or Modules.If that fails go with ebony.
A REPAIRPERSON,Barefoot Rob gone to a better place
OM03PA
Favorite saying
 OB LA DE OB LA DA,LIFE GOES ON---BRA,It is what it is,You just gotta deal it,
One By One The Penguins Steal My Sanity, Keith and Barefoot Rob on youtube
Still unclrob
#19
12 people ignoring me,so cool
rpjguitarworks
Call PM me I may be able to help

Unclrob,

Thanks for the advice.   :bowdown:  I will go with the ebony.

Kevin

Make sure you score the bottom of the bridge and the top of the guitar so that the glue can get a good hold.I'm not sure what type to use.Check with Jim at Trinity he may be able to help.
A REPAIRPERSON,Barefoot Rob gone to a better place
OM03PA
Favorite saying
 OB LA DE OB LA DA,LIFE GOES ON---BRA,It is what it is,You just gotta deal it,
One By One The Penguins Steal My Sanity, Keith and Barefoot Rob on youtube
Still unclrob
#19
12 people ignoring me,so cool
rpjguitarworks
Call PM me I may be able to help

Powered by EzPortal