glossing my L-03

Started by dhisharp, May 17, 2007, 02:05:59 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Hello folks - I posted this question on tech forum but looks like very few people visits that forum - so I am requesting people who knows about glossing a satin-finish guitar to please read my thread and put me in right direction.

http://www.larriveeforum.com/smf/index.php?topic=16548.0

Thanks for all the help and sorry to bother you, best regards
Dhiren
Larrivee L-03
Fender American Stratocaster

Don

Larrivée D-09BW
Larrivée LV-03BW
Larrivée OM-03K
Larrivée LV-03-12
Martin D-18 RIP :crying:
Mossman Tennessee 12
Gretsch Chet Atkins DC
Gretsch Tennessee Rose
Fender Am. Stratocaster
Guild X-170T Manhattan
Fender 90s Telecaster Custom
Guild Starfire 5
Gretsch 5422 12 String
G&L ASAT Deluxe Semi

Quote from: dhisharp on May 17, 2007, 02:05:59 PM
Hello folks - I posted this question on tech forum but looks like very few people visits that forum - so I am requesting people who knows about glossing a satin-finish guitar to please read my thread and put me in right direction.

http://www.larriveeforum.com/smf/index.php?topic=16548.0

Thanks for all the help and sorry to bother you, best regards
Dhiren

I'm sorry I didn't see this earlier.   You have an email. :smile:
Larrivee OM-03R-12 string + IMix external
Martin 000-15S + IMix internal
Martin OM-16GTE + Fishman Matrix
Gretch 5120
Fender Squires - Tele & Strat

whiskeyjack:  Perisoreus canadensis.  aka, gray jay, whiskey jay, whiskeyjack or timber jay.   A small, friendly bird of the northern coniferous forest.

Quote from: dbirchett on May 18, 2007, 01:15:38 AM
Here are a couple of recent ones:

http://www.larriveeforum.com/smf/index.php?topic=12808.0

http://www.larriveeforum.com/smf/index.php?topic=14555.20

http://www.larriveeforum.com/smf/index.php?topic=12830.0

If you have some time to spend, do a search on "Meguiar's" or "Orsinoize."

I have already read these threads you mentioned - and I have also read about meguiar products on this forum - thanks though !
Larrivee L-03
Fender American Stratocaster

OK, I am less expert than many here, but I have glossed three -03s, one blackwood, one Koa and one mahogany and have some opinions on the subject.

What is the best method and best products I can use to get high-gloss finish [without altering the tone of the guitar?]

From the results I have seen the best were Whiskeyjacks and I believe those were obtained by a professional with a high speed buffer and professional polishing products. His guitars were the only ones I have seen or remembered as being what I would consider a true gloss. Mine are more of a semi gloss. If you have seen Avalon guitars, that is the type of finish that I am talking about (not that I am comparing the quality of my polishing job to an Avalon factory finish but that is the effect). There are a lot of products out there. The listed Meguiar's are probably the most common and readily available, at least in the states. If you don't use Step 3 (which no one is suggesting any more), there should be no issue with silicones. I have heard of several other polishes used such as Final Note and Petros. I don't think that the polish used will result in a change in the tone that many people would be able to hear. Particularly in a double blind test. If anything, people who have polished seem to think it helps the tone. Many have recommended starting with 0000 steel wool but I have not had the temerity to try that.

I am pasting whiskeyjack's instruction below and I have some questions related to that – I would appreciate if someone could help me out.

So does this mean that you cant achieve high-gloss without using STEP 2, which seems to alter the tone ?

I don't think you can achieve a true high gloss with using Step 2 let alone without it. You can make it look very very nice but if you put it next to a gloss Larrivee, you will see a difference.

What is a small amount ? 5 drops or 10 drops ?    

That would depend on how big of an area that you are doing. I take the rag, put it over the top of the bottle, invert and let a little run out and then begin to rub it in.

I have never waxed a car – what kind of pressure are we talking about – is it gentle, moderate or heavy ? 

I would say, moderate but firm and steady. You do want to exert pressure and the more pressure you use will be rewarded with additional shine but heavy pressure may result in inconsistent results.

How long to wait for it to dry before wiping ?   

You do not want to put it on heavy so that it will dry almost simultaneously. When it dries it dries to a kind of powder, then as you wipe that off, you are polishing.

So does this mean that more rubbing/dyring/wiping would eventually lead to highgloss ?

To a point but I don't think you will get the high gloss that you seem to be seeking without a power buffer and professional quality polishiing compounds. Don't get me wrong, you can make substantial changes in the finish and I love what the polishing does but they do not come close to my D-09BW.

What should tell us that its time to stop using scratch x – amount of desired gloss ?  

If you go over it 2-3 times with Scratch-X, I would not use it any more. Go to the step 1 and 3 at that point.

So does this mean you would only see your reflection when you get to step I ? Alter the amount of Step I as per desired gloss ?

You will see some reflection after using Scratch-X but you will see more after each step and each "coat."

Using Meguiar's polish just might though – how different is STEP 2 from STEP 1 – step 2 is not an abrasive right ? it's a polish ? So again – step 1 is enough for high-gloss ?

I think that there is still a little abrasive in step 2. I believe that any polish has a little abrasive in it, finer and finer as you go.

Could anyone post high-gloss finish achieved on 03 line-up and what method/product they used – if it changed the tone of the guitar ? I am sorry for being so paranoid but its my fav guitar and I just don't want to screw it up – I hope someone who's in similar situation might find this helpful.

Personally, I think your eyes will affect your ears. If you are happy with the polish job, you will hear a "difference." It may be that you are in a better mood when you play it, it maybe that you adjust your attack, it may be that you just practice a little more often but you will perceive an improvement. As to the methods I used, I used steps 1, 2 & 3 on the Blackwood and Koa (that was before we realized there were silicones in Step 3). I like the results. I used Scratch-X and steps 1 & 2 for the 12 string. I don't see a lot of difference in them. I spent 2-3 hours on each.

Anyway, I have posted this picture before:



Good luck.

Don

Larrivée D-09BW
Larrivée LV-03BW
Larrivée OM-03K
Larrivée LV-03-12
Martin D-18 RIP :crying:
Mossman Tennessee 12
Gretsch Chet Atkins DC
Gretsch Tennessee Rose
Fender Am. Stratocaster
Guild X-170T Manhattan
Fender 90s Telecaster Custom
Guild Starfire 5
Gretsch 5422 12 String
G&L ASAT Deluxe Semi

Thanks, DB.  Appreciate your responses.

QuoteFrom the results I have seen the best were Whiskeyjacks and I believe those were obtained by a professional with a high speed buffer and professional polishing products. His guitars were the only ones I have seen or remembered as being what I would consider a true gloss.

Thank ya.         Yes. . . . and, no.

The first guitar I glossed was a 000-15S. . . .by hand. . . .using the directions posted by dhisharp.   It is this one: 

The gloss on this Larrivee OM-03R six string was done by hand first using the Meguiar's products and then touched up with a buffing wheel and very mild polish/abrasive.  Magwa owns this guitar now and was very pleased with it last I heard:

This Larrivee OM-03R twelve string was indeed done totally with a buffing wheel and some expensive polishing compound at a cost of $75 or so: 

By far and away, your best results in glossing a satin finish are obtained with a buffing wheel and professional polishing compounds at a cost of around $100.   But the Meguiar's products worked well for me.  The process I describe is un-orthodoxed: I'm not a professional wood-worker, I'm not an artist.  And I have only limited experience with finishing products. 

Thanks again Dbirchett.
Larrivee OM-03R-12 string + IMix external
Martin 000-15S + IMix internal
Martin OM-16GTE + Fishman Matrix
Gretch 5120
Fender Squires - Tele & Strat

whiskeyjack:  Perisoreus canadensis.  aka, gray jay, whiskey jay, whiskeyjack or timber jay.   A small, friendly bird of the northern coniferous forest.

Well..................

The finishes are two different beasts.   The Martin 000-15s has a nitro matte finish and the larri has a uv poly.  The uv poly is much easier to do and is hard enough to give a pretty good gloss.  Call it semi -gloss.  but its glossier that that.

The pic of the 000-15s is perfect to describe how skipping a step will not give the desired results.    Look closely at it and you'll see the lumpiness of the finish.  Thats from skipping the flattening step of using either steel wool (0000) or wet-dry with soapy lubricant.  That flattens the finish enough to polish it.  Yes , with a rubbing compound and not a polish.

There are no "coats" here.  Nothing remains on the surface to create gloss.  You are polishing using rubbing compound.  And no you don't need professional equipment to do this.  You don't need wheels or buffing machinery.

On larri's , all you need to do is mow down the particulate with wool or wet-dry and polish with Meguires no 2.  thats it.  By hand.  they'll come out great.
Peter
creestudios.com
Art Guitars and more

Thanks for that, Mr Cree.
Larrivee OM-03R-12 string + IMix external
Martin 000-15S + IMix internal
Martin OM-16GTE + Fishman Matrix
Gretch 5120
Fender Squires - Tele & Strat

whiskeyjack:  Perisoreus canadensis.  aka, gray jay, whiskey jay, whiskeyjack or timber jay.   A small, friendly bird of the northern coniferous forest.

okay friends, i am going to spend my saturday doing what's instructed to me - i will start with steel wool 0000 - will post pictures soon - thank you so much for all the help  :smile:
Larrivee L-03
Fender American Stratocaster

Whiskeyjack, sorry to be insensitive about your 000-15s.  It looks fine and we know each other from the UMGF.   

I'm only pointing out the finish differences and how much dis information exists concerning this process.   I felt I had to pipe up to keep people from screwing up their guitars.
Peter
creestudios.com
Art Guitars and more

Peter is the expert on this subject and his statements should be given the highest credence. Wish I had the opportunity to visit with him when he lived in New Mexico.

Good luck with the steel wool. That is the one step that I never had the guts to try. My suggestion is to be very careful not to use too much pressure on it and go through the finish. I'm sure that you will do fine.

Jack, I had remembered that you had sent both of your Larris out to have done. Did you do the buffing on the six string before or after you had the 12 done?  :niceguitar:

dhisharp -- what I am most trying to convey is that you have realistic expectations on this. If you are counting on replicating a factory gloss finish with a little bit of car wax and steel wool, you may be disappointed in the result. If you want to improve on the standard matte finish and have a finish that looks and feels far superior to what you had, you can do that without too much difficulty. Good luck and we want to see pictures.
Don

Larrivée D-09BW
Larrivée LV-03BW
Larrivée OM-03K
Larrivée LV-03-12
Martin D-18 RIP :crying:
Mossman Tennessee 12
Gretsch Chet Atkins DC
Gretsch Tennessee Rose
Fender Am. Stratocaster
Guild X-170T Manhattan
Fender 90s Telecaster Custom
Guild Starfire 5
Gretsch 5422 12 String
G&L ASAT Deluxe Semi

i did neck and back, here are some shots http://www.photo.net/photodb/folder?folder_id=727790 i guess this is it right ? i dont think i can get more gloss than this - can i ? i will post more later for side and top - thanks  :thumbsup
Larrivee L-03
Fender American Stratocaster

That looks great.
I have glossed two guitars and I have found that I was initially happy with the job I had done, later I would find areas I wanted to do more work on. I would end up doing that area and a little more on the whole thing. I was really happy with the end product.
2006 Larrivee P-05
1971 Guild D-50
1972 Yamaha FG180

It looks good.  :niceguitar:

You may be able to get more, particularly if you use a polisher but the question is, what do you think of it? Are you satisfied with it? If so, why bother.
Don

Larrivée D-09BW
Larrivée LV-03BW
Larrivée OM-03K
Larrivée LV-03-12
Martin D-18 RIP :crying:
Mossman Tennessee 12
Gretsch Chet Atkins DC
Gretsch Tennessee Rose
Fender Am. Stratocaster
Guild X-170T Manhattan
Fender 90s Telecaster Custom
Guild Starfire 5
Gretsch 5422 12 String
G&L ASAT Deluxe Semi

Quote from: Peter Cree on May 19, 2007, 10:37:41 AM
Whiskeyjack, sorry to be insensitive about your 000-15s.  It looks fine and we know each other from the UMGF.   
I'm only pointing out the finish differences and how much dis information exists concerning this process.   I felt I had to pipe up to keep people from screwing up their guitars.

No problem.  I've edited my initial thread on this subject from August 2006 http://www.larriveeforum.com/smf/index.php?topic=12830.0 to reflect your comments in this thread as well as links to your website and that of Tom Young.  Steve has placed the August 2006 thread in the Technical Discussion forum in the Child Boards as a FAQ thread (thanks, Steve).   Now we can refer folks to the Technical Discussion Forum child board FAQ for glossing information when the question comes around again.

QuoteDid you do the buffing on the six string before or after you had the 12 done? 

The six string was glossed after the twelve.  I tried to duplicate the (machine) gloss of the twelve by hand using only the Meguiar's products on the six string.   I got REAL close.  .  .  .but no cigar.   It didn't take much for him to bring it the rest of the way up.  If I'd had Mr Cree's advice, (regarding steel wool), I might've succeeded in duplicating the twelve string gloss by hand.

Quote. . .i guess this is it right ? i dont think i can get more gloss than this - can i ?

Dhishar:   Yes.  It looks as though you got it right!! :thumb   Scary at first, huh.   

I've taken my best photos of guitars outside among trees and sky using the guitar's finish as a mirror to capture the abstract scene above or at angles to it.  It's almost as interesting photographing the things as playing them. . . . :arrow  'Looking forward to more pics of the finished re-finished finished guitar. :laughin:
Larrivee OM-03R-12 string + IMix external
Martin 000-15S + IMix internal
Martin OM-16GTE + Fishman Matrix
Gretch 5120
Fender Squires - Tele & Strat

whiskeyjack:  Perisoreus canadensis.  aka, gray jay, whiskey jay, whiskeyjack or timber jay.   A small, friendly bird of the northern coniferous forest.

That looks awesome dhisharp.  I'll eventually do my L-03 as well.  I plan on starting with the top though.  That way, if I want to do the sides or the back, or both, one day, I won't need to remove the strings.  I think the top is the most challenging part of it...having to go around the bridge and fretboard.  I have a John Pearse armrest installed as well.  I won't bother with the neck.  I think mine is already glossing from all the playing I've done since I bought it.  Then. there's the headstock...not sure I would make the effort  but from the results I've seen, it does look good.

i uploaded some more http://www.photo.net/photodb/folder?folder_id=727790 back and sides look very good - mahogany seems to come alive ! i also did the top but apparently its not reflecting as much as sides/back probably because or darker/lighter color theory - might give one more coat to top later on.

in short: i think the steel wool concern is overblown - if i can do it without screwing it up, anyone can ! Thanks everyone, esp. peter cree !!!

tone seems little louder now - sound seems to reverberate more - not sure if i am hallucinating or may be its the newer strings - but tone seems to have improved & guitar does look more expensive now !
Larrivee L-03
Fender American Stratocaster

Well that puts mine to shame.

I'm going to do it again starting with steel wool. Now where's that Brillo pad...? :roll

So did you use Meguiars after the steel wool, and if so, did you use both step 1 and step 2? It looks fantastic.
~Lynn :guitar

The larri finish is hard enough to use the wool on with little worry.  just do it lightly and watch the edges.  Easy to unintentionally rub too hard there.  Just use the Meguire's no 2 after the wool.

Also there's no need to hurry.  I often do bits at a time especially during a string change.

the Martin pre-cat nitro is more sensitive.  And you should be careful and not skip the wool or wet-dry.  Wet-dry works beter with the Martin finish.  Also use a sanding block with the wet-dry.

Good luck all

Peter
Peter
creestudios.com
Art Guitars and more

Long story about this D-15...but the end is turning out well (so far)
I followed the steel wool - Meguiar's method for this effort.

All my pics are here http://www.icrucified.com/ForGeneralDisplay/MARTINRefinish/ if you want to look, but I've included a couple below:








I have a D-03R and thinking very strongly about putting the polish act to it; at least to the back, sides, headstock. I might (might) give a little "rub" to the top in effort to bring out some of the silking in the grain. If I do, I'll post my results here too.
bubba aka jeff

Edwinson Custom EPS
Avalon A100

Powered by EzPortal