Highgloss finish to 03 line up FAQ

Started by dhisharp, May 16, 2007, 12:37:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Hello,

I have a more than a year old L-03 and it has tanned wonderfully & I am thinking of buffing the guitar to high-gloss. I know there's plenty of information available on this forum and I have tried to collect as much as possible. I think most of the people tried for semi-gloss and I want high-gloss [like the one you in factory finish].

I think the most popular choices for glossing are meguiar products – scratch x, step I & step II. I was reading whiskeyjack's instruction and at the end he mentions that step II could alter the tone of the guitar. Could anyone throw some light on that? I have also read on this forum that stewmac's product provide better high gloss than meguiar product – not sure how true is that.

What is the best method and best products I can use to get high-gloss finish [without altering the tone of the guitar?]

I am pasting whiskeyjack's instruction below and I have some questions related to that – I would appreciate if someone could help me out.

GLOSSING YOUR GUITAR

Meguiar products:
Meguiars STEP 1 - Deep Crystal Paint Cleaner
Meguiars STEP 2 – Deep Crystal Polish
Meguiars Scratch X

Please read through this in its entirety.  Don't be in a hurry with this process. There are several ways to Gloss a factory satin finish.  Here's mine:

The materials you'll need are Meguiar's Scratch-X and Meguiar's Deep Crystal Paint Cleaner Step 1.  You can also use Step 2 Deep Crystal Polish to finish the process but this is a polish not an abrasive.  I think you'll find that the Paint Cleaner Step 1 will provide a wonderful gloss without adding the polish.  I believe that polish designed for a lacquer finish will alter the tone of your guitar which is a poly- finish. So does this mean that you cant achieve high-gloss without using STEP 2, which seems to alter the tone ?

You will need a padded surface of some kind (old towels on the kitchen table worked for me).  You will also need a couple of old cotton T-shirts for applying, rubbing and wiping off excess abrasive:  4 X 4 squares of T-shirt worked well for me.

Fold and dampen a 4x4 piece of T-shirt and put a small amount of Scratch-X on it. What is a small amount ? 5 drops or 10 drops ?   Rub the material onto a small area (4" X 4") in the direction of the wood grain.   You can apply the same amount of pressure used to wax your car. I have never waxed a car – what kind of pressure are we talking about – is it gentle, moderate or heavy ?  Rub for about 45 seconds or so, let dry and use a clean piece of T-shirt to wipe the dried Scratch-X off. How long to wait for it to dry before wiping ?   This stuff dries quickly.  You'll see the shine start to show through after the second cycle of rubbing/drying/wiping.   Alter the amount of Scratch-X, rubbing time and pressure according to the progress you see in glossing.  So does this mean that more rubbing/dyring/wiping would eventually lead to highgloss ? Then do an adjacent area, etc. until the whole guitar is done.  This takes patience and more than a little faith – it's going to look really, really ugly at first.  You will wonder if you've screwed up by attempting this.  Persevere!!  It's gotta' look awful before it looks pretty.

Ideally, you want to be consistent so that the entire finish has the same degree of treatment.  This is impossible!   It's one of those variables that you really can't measure.   Just try to be consistent from place to place. The only barometer you have is the degree of shine.  Eye-ball it and call it good!   There's plenty of finish on the guitar.  Concerns about rubbing through the finish are mostly bogus.  You've gotta REALLY be rubbing for prolonged periods of time to do that with Scratch-X.  Sandpaper and steel wool will rub through a LOT quicker than Scratch-X.  Don't use those.

***THIS IS IMPORTANT "Do NOT allow Meguiar's products to pool on the guitar:  don't squirt it on and leave it there.  There are chemicals in this product that will soften and discolour the finish of your guitar if you leave globs of it on too long.  Remember, this stuff is meant for use on hard, lacquer automotive finishes not the relatively soft polyurethane family of products on wood. . . .rub it on, let it dry and rub it off.***

Do the entire back and sides this way. You can also put a light coating on the neck as well, although your natural oils will gloss the neck up over time as you play. You will miss spots, and there will be spots that you will need to go over again. Moving the glossed surface at angles to sunlight will help you identify these.  Also, the bridge, pick guard and onboard electronics areas are awkward.   These areas will be most time consuming.  I'd recommend removing the pick guard and replacing it later.  If you're doing the headstock, remove the tuners.   Remove side-mounted electronics if you can.  That leaves the bridge – expect a little bit of satin shadow around the bridge.  It's just something that happens when you do this by hand.

You may think that your guitar is beautiful just having glossed it with the Scratch-X. What should tell us that its time to stop using scratch x – amount of desired gloss ?   But take the time and apply the Paint Cleaner Step #1 (a milder abrasive), using the same technique. This will deepen the shine to the point where you can see your reflection fairly clearly.  So does this mean you would only see your reflection when you get to step I ? Alter the amount of Step I as per desired gloss ? This step will go a lot quicker.  You can treat larger areas to help even out the shine over the entire guitar.  If you see a spot or two that was missed with Scratch-X, go back and re-apply on that spot.

The end result will be a lovely, deep reflection of wood grain that is usually hidden by satin finish.  You might also see factory orbital sandpaper grit marks or grit marks directly across the grain.  These are just "character marks":  the imperfect touch of the human hand before the finish was applied.  Satin guitars are cheaper to make because less time goes into wood preparation and painting.  Satin finishes are cheaper to purchase and are applied quicker. 

Glossing causes no harm to your guitar.  It does, however, void the warranty on the factory finish.  If you screw it up, it's your problem.  Glossing has been thought to alter the tone of guitars but the claim is made infrequently by obsessive/compulsive guitar weenies like me.  It ain't likely that glossing will affect the tone.  Using Meguiar's polish just might though – how different is STEP 2 from STEP 1 – step 2 is not an abrasive right ? it's a polish ? So again – step 1 is enough for high-gloss ?

Some folks go one step further and use Meguiar's polish and wax.   I don't like 'em.   The best way to maintain the shine after glossing is with Gibson guitar polish.  Good stuff.

Could anyone post high-gloss finish achieved on 03 line-up and what method/product they used – if it changed the tone of the guitar ? I am sorry for being so paranoid but its my fav guitar and I just don't want to screw it up – I hope someone who's in similar situation might find this helpful.

Thanks a million for your time & patience
Dhiren

ps: & my apologies for a long post
Larrivee L-03
Fender American Stratocaster

You will not be able to turn the satin finish into a "high gloss finish." You can make it take on a "sheen", but that's about it.

Probably I used the wrong term 'high-gloss' - I have seen a lot folks have used meguiar products to get reflective gloss [lets use that term] & just want to make sure, which is the optimum process & what products to use - step I or step II - thanks
Larrivee L-03
Fender American Stratocaster


I sent a PM to peter cree yesterday, so I am waiting for him to respond to this - thanks
Larrivee L-03
Fender American Stratocaster

I responded......................

:wave
Peter
creestudios.com
Art Guitars and more

You've got an email from me also.  And if anything in my formula was misguided, I'd sure appreciate knowing about it as well. 
Larrivee OM-03R-12 string + IMix external
Martin 000-15S + IMix internal
Martin OM-16GTE + Fishman Matrix
Gretch 5120
Fender Squires - Tele & Strat

whiskeyjack:  Perisoreus canadensis.  aka, gray jay, whiskey jay, whiskeyjack or timber jay.   A small, friendly bird of the northern coniferous forest.

Quote from: 12barBill on May 16, 2007, 04:31:50 PM
You will not be able to turn the satin finish into a "high gloss finish." You can make it take on a "sheen", but that's about it.
:ph34r:
I have to disagree, I achieved a high gloss finish by polishing an lv-03.  PM whiskyjack and see if he still has the pictures of an OM-03R he polished to a "full gloss" finish. It can be done.  Oh and you start with scratch x.  99% of the work is with the scratch x and t shirt squares.

I know I saw on Frets.com that Collings uses a product called Novus Plastic Polish. It is a 3 step system similar to the one outlied by Whiskeyjack using Maguires. Novus is a plastic polish and might be less impactful to tone etc. FWIW Collings also uses a UV finish like Larrivee. (you can find it on frets.com or by googling Novus #3 or Novus Plastic Polish)
- Dan

Powered by EzPortal