Shaved Parlor? Better?

Started by lutert, August 16, 2006, 05:16:03 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Over the past two years I have found that my Special Edition Rosewood Parlor has become my absolute favorite guitar to play. I have owned several Guild dreadnaughts, a Taylor 310, Taylor 512, Taylor 414mace, and Breedlove Balance. I have played many more makers and models over the years and I have yet to find anything more fun and expressive to play than my lil' Larrivee. I truly love it. I bought it used from a member here and want to thank him for giving me this treasure.

Last year I took the time to polish out the satin finish on the back and sides, but left the top satin. The beautiful, bear-claw spruce top is a shining example of Larrivee quality.

Last fall I brought it on a business trip and when I came home I had thought the bellman had not loaded it into my rental car and thought it was lost forever... Several weeks later the rental car company called and said they found it in the Yukon we rented. We had had the seats folded down and apparently it had fallen down beneath the seats. I was so happy to have it back!

Recently I read a posting about someone who had shaved the top braces on several of their Larrivee parlors. As I often thought, that this guitar could stand a little more bass and volume, I decided to give it a try. I read how shaping the top braces from square to a parabolic shape would allow the top to vibrate more freely and still maintain the strength needed to hold the bridge in place. After several hours of sanding with my hand in several awkward positions, I decided to string it up and see what came of my work.

WOW!!! WOW!!! WOW!!! WOW!!! WOW!!! WOW!!! WOW!!! WOW!!! WOW!!! WOW!!! WOW!!! WOW!!! WOW!!! WOW!!!

Was that totally worth the time? YES

This already fabulous sounding guitar has just gotten louder, richer and more sensitive... It is hard to describe it, but I know shaving these braces has made a fabulous guitar better...

So, just wanted to start some conversation about this...

How much material did you remove? Did you shave all of the braces, or just those on the lower bout?
Ron


I rounded the sides of the x-braces up to the top. Be careful not to take anything off the tops. I'm looking at my pinky finger now and saying that that the curve around tht tip of my finger is about the appropriate shape. It will take a while with small pieces of 120 grit sandpaper, but well worth it in my oppinion.

WARNING: This totallly voids you warranty, so think about your decision to do this. Do a google on acoustic guitar brace shaving for more ideas and advise.




I wrote this post back in April of 2004.

"I brought both my P-09QM Parlor and old style Rose Wood Parlor into my local luthier for some fret work on the QM Parlor.  He played my Rose Wood Parlor and exclaimed how my little guitar was the loudest Larrivee Parlor he had ever played.  I told him that I had read an article on parabolic brace shaving and that I had done that kind of shaving on my guitar. 
I basically did most of the shaving (sanding) on the X braces and a bit on the tone bar near the base of the guitar.  As per the brace-shaving document, I just gave each brace a knife-edge top rather than the square top.  The process took about six hours.  Even though my arms aren't that big, I had a difficult time getting at those braces.  I had quite a large bruise on the inside of both my forearms.
The luthier took a look at the braces and said that in no way did I diminish the structural integrity of the top. 
In conclusion, I highly recommend doing this work to your Parlors.  As a matter of fact, any guitar's volume can be greatly enhanced by this procedure.  The only issue I can see is the potential voiding of your limited lifetime warranty.  I want the most out of my life, so that didn't stop me from doing the work. 
Have fun,
Bob"

The Rosewood Parlor is now in its sixth year of life with Shaved braces.  It's living large and in charge.
Bob

I posted this back in 2005

"I brought up this topic about a year ago.
http://www.larriveeforum.com/forums/index....T&f=2&t=989&hl=
It seems the general consensus is that one can change out the tuning keys, the nut, the strings, the saddle and the bridge pins in order to enhance to tone but leave those braces alone.  If one approaches a Larrivee's braces the same way one might approach an older Martin's braces with regards to scalloping, the chance for creating structural problems is great.  I am in no way recommending this type of shaving to the inside section of the braces.  What I did was reshape the squared top of the "X" braces into more of a knife-edge.  I did this work five years ago and I live in the arid Rocky Mountains.  The guitar seems to be as structurally robust as the day it was purchased. 
I respect Matthew Larrivee's views about his guitars.  If I had read his statements back then I very well might not have done what I did.  But that's all water under the bridge as they say.  My Rosewood Parlor is one of sweetest, most balanced, LOUDEST parlors you will ever come across."


People have been hacking away at braces ever since Martin stopped the first time in 1945 (they started again in the 1980s).  The consensus is that it makes the guitar sound better.  Whether or not it affects the integrity of the top over the long term is not completely clear.  Certainly it changes the guitar from what the designer and builder had in mind, and voids any warranrty.

E. Shoaf

The warranty may be voided (I purchased mine used, so no warranty anyway), but not sure the integrity of the guitar has been breeched. As I understand it, parabolically shaped braces are just as strong as square shaped braces. Yes I have removed some of the structure of the instrument, but only what holds the top back from moving and not what holds it together... Thoughts???

Some of our members feel that keeping a guitar in it's stock form is best.  And others feel that a tweak here and there is more to their liking.  I replaced the stock Tusq saddle with one of bone.  I removed the stock plastic bridge-pins and put in ones made of ebony.  I changed out my stock chrome tuner buttons for the black ebonized ones.  I took off my stock clear pick-guard and put on a Greven pick-guard with a brown and amber pattern.  I polished out the stock satin finish to a high lustrous gloss.  I restrung my guitar with Medium Phosphor Bronze Nanoweb Elixirs rather than the stock Light Nanoweb Elixirs.  And lastly, I parabolically sanded my stock braces.  Some may be appalled at what I've done to a perfectly good parlor guitar.  Others might smile and say "good job".  What can I say, my guitars are my passion.  Incidentally, my car is completely stock. 

Reversible tweaks are one thing, non-reversible cutting of wood is quite another.


E. Shoaf

I may not completely agree with you, but I understand your sentiment.

If fyou got the money to blow (and 500 is not much wasted considering the most basic luthier class would run 4 grand), then I think it's kidn of cool.  Like a hobby.  Besides, it's just a guitar.  They are meant to be played.  If you can get a "better" tone out of them, then I think you should.
Larrivee LSV-05
Larrivee LV-09FM
Larrivee CS-30
Yamaha Chronos LL-16
Yamaha Pacifica 112J
Martin LX-1
Fender American Stratocaster Delux
Fender Mexican Stratocaster
Fender Mexican Telecaster
Rivera Sedon

Lutert & Little Jack;

How are shaved parlor's hold'n up?

Lutert;
I't been a year or so, has top bellied or sunk atall?

How the sound these days?

Are you still glad you did it?

Little Jack;
Are you still happy with your's?

Thanks gents...

d.


Quote from: little Jack on August 17, 2006, 10:47:50 PM
I posted this back in 2005

"I brought up this topic about a year ago.
http://www.larriveeforum.com/forums/index....T&f=2&t=989&hl=
It seems the general consensus is that one can change out the tuning keys, the nut, the strings, the saddle and the bridge pins in order to enhance to tone but leave those braces alone.  If one approaches a Larrivee's braces the same way one might approach an older Martin's braces with regards to scalloping, the chance for creating structural problems is great.  I am in no way recommending this type of shaving to the inside section of the braces.  What I did was reshape the squared top of the "X" braces into more of a knife-edge.  I did this work five years ago and I live in the arid Rocky Mountains.  The guitar seems to be as structurally robust as the day it was purchased. 
I respect Matthew Larrivee's views about his guitars.  If I had read his statements back then I very well might not have done what I did.  But that's all water under the bridge as they say.  My Rosewood Parlor is one of sweetest, most balanced, LOUDEST parlors you will ever come across."

Is this link gone? It doesn't work for me.

Is there any way to get a sketch or photo showing this work? I'm having a hard time visualizing the cross-section. Did you just 'break" the top corners on the bracing, or did you remove a significant amount of material? Sounds like the braces are now triangular in cross section rather than rectangular; that would require about half the wood to be removed.
Walt33

OM-03 spruce 'n' hog

this is what i am thinking about... the "Before" dimensions area taken from the braces on my OM19 (and no i am not thinking of trying it out on that one...) and the "after" dimensions are a semi-informed WAG... and that is why i would like to know more!



Ta,

d.



Aha. Thanks, Dermot, that is definitely a parabola! Must be a real joy doing that job thru the soundhole! Hmmm . . .
Walt33

OM-03 spruce 'n' hog

Powered by EzPortal