Which model...

Started by flaggerphil, July 12, 2006, 10:51:24 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down 1
User actions
July 12, 2006, 10:51:24 PM
...would be about midway in size between an OM and a Parlor???
Phil

"History is something that never happened, written by someone who wasn't there."

R. Taylor Style 1 WR
Taylor T5-C Cocobolo
Taylor GS Custom
Taylor PG-LTD
Taylor 600-SPEC
Taylor 510-LTD
Taylor 510 Cocobolo
Taylor 412-M
July 12, 2006, 10:52:25 PM #1
OOO? That would be the only Larrivee size between the two.
July 12, 2006, 10:59:24 PM #2
00 size is between the OM and Parlor sizes.

Check the specs at the Larrivee web site for a more accurate look at dimensions.

Steve  :GRN>
July 12, 2006, 11:00:38 PM #3
Larrivee's OOO is slightly smaller (but slightly deeper). The OO should be right in between the two.

Here we go:

OO Specifications

Lower Bout: 14"
Upper Bout: 10"
Waist: 8.25"
Depth: 4.0"
Scale Length: 25.5"
Nut Width: 1 & 3/4" (44.3mm or 1.75")
Setup for Light Gauge Strings
Frets - Nickel/Silver
Frets - Width: 2.5mm (0.0985")
Frets - Height: 1.0mm (0.0394")
Gloss UV Polyester Body / Satin Urethane Neck

P Specifications:

Lower Bout: 13.25"
Upper Bout: 9.5"
Waist: 7.75"
Depth: 4.0"
Scale Length: 24"
Nut Width: 1 & 3/4"" (44.3mm or 1.75")
Fretboard Radius: Compound (17" to 21")
Setup for Light Gauge Strings
Frets - Nickel/Silver
Frets - Width: 2.5mm (0.0985")
Frets - Height: 1.0mm (0.0394")
Gloss Urethane

You can look the rest up on Larrivee's site or guitaradoptions.com
July 13, 2006, 12:35:46 AM #4
Thanks!
Phil

"History is something that never happened, written by someone who wasn't there."

R. Taylor Style 1 WR
Taylor T5-C Cocobolo
Taylor GS Custom
Taylor PG-LTD
Taylor 600-SPEC
Taylor 510-LTD
Taylor 510 Cocobolo
Taylor 412-M
July 13, 2006, 12:58:59 PM #5
Every 00 I've picked up has sonically been much more guitar than any parlor I've picked up.  Try one, you'll like it!
"Sometimes you wear stretchy pants, in your room...  Is for fun..."  Nacho
July 13, 2006, 01:04:43 PM #6
If you have an interest in a 00 with a nut width of 1 11/16", check out my link below.
Phil


http://www.larriveeforum.com/smf/index.php?topic=12370.0
July 13, 2006, 01:07:38 PM #7
In a way the 00 is easier to hold and play.  Has that extra bit of size over the parlor that really lets you grab hold.

E. Shoaf
User actions
Print
Go Up 1
Powered by EzPortal