pearse armrest?

Started by joopie, June 01, 2006, 10:59:22 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

wiskeyjack's thread got me thinkin' and the posts about the armrests...

i'm thinkin' i might get one (ebony) for my OM - any info/input on these- pros/cons, sizes, how are they attached- adhesive?

thanks,  :mellow: J.
OM-18V

ok- so i looked through some past threads and i think gonna go w/ the pearse slimline armrest- a lot of positive feedback on these- and i kinda like the look too...

:mellow: J.
OM-18V

There's a thin strip of adhesive tape on the outer edge of the Pearse arm rests.  I've never had to remove mine but my luthier tells me it's not that difficult.

The thinking is that these arm rests  decrease the damping effect your arm has on the movement of the sound board.  Everything from an increase in volume to better tasting popcorn has been cited as a benefit. ^_^  My experience with arm rests has been definitive. . . .on small guitars. 

I installed Pearse rests on my Taylor K12C and Larrivee 03R and I had my luthier make me one for my 000-15S.  There's nothing to installing them so long as you take the time to line them up as perfectly as possible with the binding on the lower bout.  Practice a couple times before you peel the backing off the tape because once it's down you don't want to remove it - the adhesive won't stick as tightly after the first time around.

I'm not convinced that arm rests are a benefit to larger guitars where the top and box are considerably larger.  The do look cool though -_- 

On my guitars I'm certain that I hear an increase in volume and projection.  They didn't seem to affect the voice of the instruments.  If you routinely use sound reinforcement of some kind, arm rests don't make a lot of sense.

Hope this helps.
Larrivee OM-03R-12 string + IMix external
Martin 000-15S + IMix internal
Martin OM-16GTE + Fishman Matrix
Gretch 5120
Fender Squires - Tele & Strat

whiskeyjack:  Perisoreus canadensis.  aka, gray jay, whiskey jay, whiskeyjack or timber jay.   A small, friendly bird of the northern coniferous forest.

thanks wiskeyjack- yep i was reading through some old threads and noted it had adhesive strip- and most folks seem to feel they have made a difference in more ways than one- i'm havin' fun w/ the idea of adding this detail to my OM-03- had bone and ebony added not to long ago- along w/ a good set up- really lovin this guitar!

:mellow: J.
OM-18V

Glad you like your OM!

Looking through the previous posts on this topic, I found a very helpful hint. If for some reason you need to remove your arm reast, using dental floss between the top and the stick stuff does the trick--rather that twisting or pulling on the top. I was so curious that I tried it...and it worked! :GRN>


"...when love comes to town gonna jump that train" --B. B. King

SD-50 Commemorative
Goodall walnut-engleman CJ
Charis madigascar-cedar SJ
Loriente Isabel pau ferro-german Classical

Checking out the Pearse site I came across several John Pearse bridge pin sets in bell-bronze, bone, and buffalo horn (as well as faux tortoise shell).

http://www.jpstrings.com/brnew.htm

Does anyone agree that bridge pins affect the amount of energy transmitted through the bridge? Even if they don't I'm tempted to buy those bronze beauties! I wonder if they fit Larrivee guitars?


I have them on all of my acoustics.  And one size does not fit all.  To get a proper fit, I had to reshape each one to fit the contour of each guitar.  Especially if you position them on the guitar in the best location for your arm.  The adhesive is a 3M double sided tape which can be removed with a little heat from a hair dryer and slowly lift . . . similar to removing a pickguard only a lot easier and no residue left behind.  I'll send you a photo of the one I cut out of the full size armrest that I customized for my 814.
Johnson L Body
A&L AMI
Cort Earth 900
Taylor Big Baby
Gold Tone PBR
Regal RC-51
Fender R48
Ariana Classical
Seagull Artist Grand
Gibson SJ
Gibson J-55
Taylor 355
Taylor 414
Larrivée L-05
Guild D-55
Taylor 614ce
Taylor 714ce
Taylor 814c
Kent archtop
Silvertone archtop
Les Paul Custom

Well, I can't send you the image since your email isn't listed . . .
Johnson L Body
A&L AMI
Cort Earth 900
Taylor Big Baby
Gold Tone PBR
Regal RC-51
Fender R48
Ariana Classical
Seagull Artist Grand
Gibson SJ
Gibson J-55
Taylor 355
Taylor 414
Larrivée L-05
Guild D-55
Taylor 614ce
Taylor 714ce
Taylor 814c
Kent archtop
Silvertone archtop
Les Paul Custom

Quote from: sacredground on June 02, 2006, 09:10:35 AM
Glad you like your OM!

Looking through the previous posts on this topic, I found a very helpful hint. If for some reason you need to remove your arm reast, using dental floss between the top and the stick stuff does the trick--rather that twisting or pulling on the top. I was so curious that I tried it...and it worked! :GRN>

yeah- i read that too- a good tip!

:mellow: J.
OM-18V

John Pearse has some excellent products, especially strings.  John is a great guy, I know him from another forum.  But I guess I'm a purist when it comes to the armrest.  I can't put one of them on a guitar top.  I also prefer the clear pickguard, which may be a correlation to the no armrest policy.

I was going to buy one on impulse after hearing all this talk about them, but can't find anyone with a left handed model. Also the left hand version is not available in the slimline, only the original.

So much for the impulse buy.  :<>
jeff

Larrivee 00-03MT Forum IV  #30 of 29

I put an ebony Jr. on my OM-03, its a good fit.  I was resting my arm on the top due to the smaller body of the guitar.  I can hear the difference in volume and sustain.
Now I am trying to figure if I need one on my new D-03R and if so which one, the ebony to match the fingerboard/bridge or the rosewood to match the back/sides?
Richard

Larrivee OM-03
Larrivee L-05MT
Martin 000-28
Martin 000-28
Martin D35
Ovation Balladeer
Fender Mexi-Tele

If any lefties looking for these I found them at FQMS.
jeff

Larrivee 00-03MT Forum IV  #30 of 29

I'm expecting one of these today...slimline junior...which I will be attaching to my parlor...both for the sound improvement and to coverup a dinger on the lower bout. I'll report back on Monday as to my first impressions.

Blue
OM-05MT "Mary Helen"
Silvercreek T-170
Harmony Herd (1203, 162, 165, 6362)

Quote from: pigtown on June 02, 2006, 11:07:57 AM
...I can't put [an armrest] on a guitar top.  I also prefer the clear pickguard ...

Amen.  I'm saddened (if not shocked & appalled) by Larrivee's change to 'traditional' pickguards. <sigh>

- Richard
oldWithoutMoney.com

Larrivee L-09 (w/ non-cutout iMix)
Larrivee 00-19
Larrivee OM-0312R

plus a few other treasures

I'm gonna order one today for my OM.  I thing for the price, if it improves the sound that much, it's definitely worth it.

I think the smaller the guitar, the more difference you'll hear.
Larrivee OM-03R-12 string + IMix external
Martin 000-15S + IMix internal
Martin OM-16GTE + Fishman Matrix
Gretch 5120
Fender Squires - Tele & Strat

whiskeyjack:  Perisoreus canadensis.  aka, gray jay, whiskey jay, whiskeyjack or timber jay.   A small, friendly bird of the northern coniferous forest.

Denis- are you goin' junior or slimline?

:mellow: J.
OM-18V

Quote from: joopie on June 02, 2006, 08:03:54 PM
Denis- are you goin' junior or slimline?

:mellow: J.

I think it's both the one I am thinking of buying...junior slimline...:

http://elderly.com/accessories/items/JPA6.htm

Which one fits an L series best?

Powered by EzPortal