I thought I'd give my thoughts on my new D-03R. I have four Larrivee's. I'll only compare the D-03R with the D-40R and my D-40. My SD-40R is a 12-fret and a different animal. This instrument has really surprised me. As a fingerstyle player, I didn't this instrument was going to be as responsive as a scalloped braced instrument. I just thought I should own a non-scalloped Larrivee instrument. But it certainly is responsive. And it has a wonderful sustain which matched my D-40R and beats the D-40. The instrument feels slightly heavier than the other two instruments. I've always had this opinion that an instrument has to be lighter to be responsive. I've learned this isn't the case. And I wonder if a slightly heavier instrument adds a better quality of tone. All three of these instruments have a nicer tonal quality than my former Martin DSS-17. The neck on the D-03 feel slightly fuller than my other two instruments. I think I like this especially on a 1 & 11'16" neck. It puts my hand in a position where my fingers don't feel cramped on tightly spaced chords. Finally, and it might be this non-scalloped bracing system, but I find the note separation so clear on the D-03R. I hear all the notes within the chord just like on the D-40 with the mahogany body instrument but with that added rich sound of rosewood. With my D-40R, I have to work to get this note separation clarity. One thing I've found interesting listening to demos is that maybe this non-scalloped bracing is something I just prefer. I've only been attracted to the Martin D-28 and D-35 instruments. Both instruments come non-scalloped but come scalloped on their HD and other models. When I listen to demos comparing the different versions of these instruments, I always seem to prefer the non-scalloped D-28 and D-35. So right now, I'd have to say this new D-03 has taken first place of my 14-fret Larrivee instruments.
Glad you're liking it.
Have you tried an *L* body yet?
That's a *real* Larrivée. :wink:
This is a detailed and comprehensive comparison on the 03/40 series Larrivee dreadnoughts from your perspective as an experienced fingerstyle guitarist. I may have 1 or 2 guitars left in my future and the SD model is on my short list. Thanks for sharing your insights.
There are many variables to consider: scalloped vs. non-scalloped, satin vs. gloss, 12 vs. 14 fret, long vs. short scale, top, back and side woods, string gauges a solid vs. slotted headstock to name a few.
I would also be interested to know how the satin finish Martin D18/28 guitars would sound compared To the satin D03/40 series mahogany and rosewood models.
Quote from: Rockysdad on January 10, 2025, 07:39:24 PMGlad you're liking it.
Have you tried an *L* body yet?
That's a *real* Larrivée. :wink:
I do like the looks of the L body style. The dealer I work with had an L model and my current D-03. But this D-03R was the clear winner and ultimately it is all about sound.
Quote from: teh on January 10, 2025, 09:13:00 PMThis is a detailed and comprehensive comparison on the 03/40 series Larrivee dreadnoughts from your perspective as an experienced fingerstyle guitarist. I may have 1 or 2 guitars left in my future and the SD model is on my short list. Thanks for sharing your insights.
There are many variables to consider: scalloped vs. non-scalloped, satin vs. gloss, 12 vs. 14 fret, long vs. short scale, top, back and side woods, string gauges a solid vs. slotted headstock to name a few.
I would also be interested to know how the satin finish Martin D18/28 guitars would sound compared To the satin D03/40 series mahogany and rosewood models.
You can't go wrong with an SD model. It is my special guitar. That is why I didn't include it in this review. It is hard to find good demos of Larrivee models. Too many hot dogs showing off and not doing simple things like playing a chord and just letting it ring out to measure sustain. I just visually don't like gloss finish and that is one of several reasons I never really considered a Martin flagship model. I'm sure the finish affects the sound but I'm happy with the satin finish. I do own one Martin, the 000-15SM. It is my least played instrument. But when I play it, I think why aren't I playing this more often? Itis so balanced and with great sustain. I love the headstock, and I have to say I think that the headstock is the reason it just stays so in tune all the time. And it doesn't have binding, so Martin can't screw that up LOL!!! Prefer standard scale for my instruments regardless of body size. And I'm not fussy about neck dimensions. I do find with the 1 &11/16" with, I'm forced to be more accurate with my finger placement.
I prefer non scalloped bracing also, but that's only because I'm not interested in super loud dreads. Back in 2008 I REALLY wanted a Martin D-28 with non scalloped bracing, and the big box sales guy got me to buy an HD-28... Good salesman. 10 years of playing that and I got sick of the loud boom and sold it.
Welcome to the non-scalloped club. After all, it's Jean's original design. All mine use this bracing, including my custom built Northwood OO.
Here's my Sunday morning ramble regarding my thoughts on scalloped vs. non-scalloped before I head out to shovel and snowblow the driveway and deck, again. After 55 years of playing guitar and 20+ years as a forum member, I'm convinced that guitar builders are continuously seeking ways to build a better mouse trap. As a result, today's guitar players, especially Larrivee owners have more options than ever available to them.
My first two Larrivees built in Vancouver have non-scalloped bracing: 2004 Spruce/Maple Parlor and 2005 LV-03 all Mahogany 12 string. The next two built in Oxnard have scalloped bracing: 2021 LSV-03, Forum VI Moonwood/Walnut and 2024 00-24 all Mahogany. All four guitars have a satin finish, two are short scale, three have a 12 fret neck and the two L bodies have a Venetian cutaway. My three Martins include a non-scalloped Spruce/Rosewood 1976 D-35 and two scalloped: a 2006 Spruce/Rosewood OM-35 and a 2015 Spruce/3 piece Mahogany back and sides 000-12 fret slothead. All three were made in Nazareth, PA, have a gloss finish and the D and OM have a sunburst top.
In 2024, I also acquired my first electric guitar ever, a Larrivee Baker T Pro from Matthew Larrivee. My son has an American made Fender Telecaster and a Taylor solid body electric and the Baker T outshines them both.
In closing, while I'd never sell or trade any of my Martins, I'm glad I discovered Larrivee 20 years ago. When they introduced the 24 series last year, they must have been telegraphing my thoughts. I wanted a short scale, 12 fret 00 at an affordable price and Larrivee once again delivered. They even made it possible to switch my guitar top over from Adirondack Spruce to Mahogany. It was well worth the five month wait.
Quote from: teh on January 12, 2025, 07:34:36 AMHere's my Sunday morning ramble regarding my thoughts on scalloped vs. non-scalloped before I head out to shovel and snowblow the driveway and deck, again. After 55 years of playing guitar and 20+ years as a forum member, I'm convinced that guitar builders are continuously seeking ways to build a better mouse trap. As a result, today's guitar players, especially Larrivee owners have more options than ever available to them.
That is quite a collection of guitars you have. When you say builders are always trying to build a better mouse trap, do you think Larrivee's trend to building their new line with the scalloped bracing indicates they think this is the superior brace system or is a better selling bracing system? I'm glad they finally came out with a short scale model that doesn't have an upcharge like everyone else. I don't know when they started offering their traditional series. And finally, an Adirondack top like other companies. Since you have both bracing systems, which one do you prefer? At my age, I don't see myself getting anymore instruments unless I sell that Martin 000-15SM. In that case, I'd like a square shoulder 12-fret dreadnaught. I almost bought one this past year from Larrivee, but for whatever reason it only had 17 frets. Even their SD model has 18 frets. so, I bought the D-40 instead. I don't consider my 000-15SM a real 12-fret instrument or for that matter any of the Martin 12 fret instruments as they don't move the bridge back, they just build the upper bout up to the 12th fret. I can really hear the difference comparing my Larrivee SD-40R with the Martin 000-15SM. If I did get a 12-fret dreadnought, then what would be the bracing system that would work best. I noticed the Tommy Emanuel model uses non-scalloped bracing, so I assume he prefers that system. Anyway, let me know which system you prefer.
I'll put up a DO3R against a Martin D 28 any day
Exceptional guitars
My feeling is that Larrivee designed a better scalloped bracing system to improve the tone of their guitars that use it.
When I hopped on the Forum VI bandwagon in 2021, I suggested the following specs; all mahogany, short scale, 12 fret 00. We ended up with these final specs: Moonwood/Walnut, 25.5" scale, 12 fret neck and I added an optional Venetian cutaway which was only a $300 upcharge.
When I pulled my new Larrivee 00-24 out of the case in October, I was blown away by the tone, volume and playability of this guitar. Last May, I e-mailed Jr. as soon as the 24 series was introduced and asked if I could swap out the Adirondack Spruce top and replace it with mahogany. He told me no problem and it would be ready in the fall, which it was. From my perspective, I don't favor one form of bracing (straight or scalloped) over another.
As I mentioned in previous threads, I believe the thinner 1/4" top bracing used in my D-35, OM-35 and 000 12 fret improve the tone over the 5/16" top bracing used in the 18/28 series. When I put the specs together for my custom Martin, I originally planned to order a 12 fret dread like the old discontinued D-35S model. My son suggested I use the 000 body shape which I did with no regrets.
If Larrivee would reintroduce the LS-30 and LSV-30 series classical guitars with a satin finish that they made in the 2000s, I'd probably consider one. The versions shown in my Larrivee catalog had a 2" nut width and gloss finish.
Quote from: teh on January 12, 2025, 09:40:49 PMWe ended up with these final specs: Moonwood/Walnut, 25.5" scale, 12 fret neck and I added an optional Venetian cutaway which was only a $300 upcharge.
Ahh, but please mention the scalloped hybrid bracing system which, when added to the LS body, and topped with the paddle headstock, helped create the stealth personality of the VI. No one knows it's there.
Mike
Quote from: teh on January 12, 2025, 09:40:49 PMMy feeling is that Larrivee designed a better scalloped bracing system to improve the tone of their guitars that use it.
When I hopped on the Forum VI bandwagon in 2021, I suggested the following specs; all mahogany, short scale, 12 fret 00. We ended up with these final specs: Moonwood/Walnut, 25.5" scale, 12 fret neck and I added an optional Venetian cutaway which was only a $300 upcharge.
When I pulled my new Larrivee 00-24 out of the case in October, I was blown away by the tone, volume and playability of this guitar. Last May, I e-mailed Jr. as soon as the 24 series was introduced and asked if I could swap out the Adirondack Spruce top and replace it with mahogany. He told me no problem and it would be ready in the fall, which it was. From my perspective, I don't favor one form of bracing (straight or scalloped) over another.
As I mentioned in previous threads, I believe the thinner 1/4" top bracing used in my D-35, OM-35 and 000 12 fret improve the tone over the 5/16" top bracing used in the 18/28 series. When I put the specs together for my custom Martin, I originally planned to order a 12 fret dread like the old discontinued D-35S model. My son suggested I use the 000 body shape which I did with no regrets.
If Larrivee would reintroduce the LS-30 and LSV-30 series classical guitars with a satin finish that they made in the 2000s, I'd probably consider one. The versions shown in my Larrivee catalog had a 2" nut width and gloss finish.
I found your comments about bracing thickness interesting. Your impressions on the Martin instruments are smaller braces improve the sound. I just noticed this morning that Martin is offering a D-17 all mahogany instrument for 2025. The difference between the D-17 and the D-15 is that it has scalloped bracing which is less wood than scalloped. Here is what Martin says: "The Sitka spruce Golden Era (GE) top bracing, as featured on the Modern Deluxe Series, offers a more vintage, breathy tone." It also has a 1.75" nut width. At several hundred dollars more than their 15 series, I'd hope to be able to hear a difference. It looks just like the D-15.
I love the Larrivee paddle headstock. I wish they would use it on the 40 series as well. Anyone try to file down the sharp corners to make their own paddle shape on a 40 series?? :humour:
The paddle headstock was one of the things that drew my eye to Larrivee originally. I also love the old silver lining around it on some of the models. Mine doesn't have the silver but I love that look. I'm not sure when that was dropped as an option?
Quote from: Silence Dogood on January 13, 2025, 12:38:06 PMI also love the old silver lining around it on some of the models. Mine doesn't have the silver but I love that look. I'm not sure when that was dropped as an option?
The silver stripe is on the -05 and up paddleheads. You can get it as an option on -03 if you order it.
Mike
Quote from: William2 on January 13, 2025, 10:24:50 AMI found your comments about bracing thickness interesting. Your impressions on the Martin instruments are smaller braces improve the sound. I just noticed this morning that Martin is offering a D-17 all mahogany instrument for 2025. The difference between the D-17 and the D-15 is that it has scalloped bracing which is less wood than scalloped. Here is what Martin says: "The Sitka spruce Golden Era (GE) top bracing, as featured on the Modern Deluxe Series, offers a more vintage, breathy tone." It also has a 1.75" nut width. At several hundred dollars more than their 15 series, I'd hope to be able to hear a difference. It looks just like the D-15.
There are some other differences between the Martin D-15 and the new Martin D-17:
1) The 15 Series have a different, simpler top bracing than the Standard Series Martins. There are less braces and it's a totally different pattern. So the 17 Series models have what most would consider "upgraded" bracing. Part of this upgraded bracing system is a bridge with thinner wings and a smaller bridge plate under the top - both *should* contribute to better tone.
2) The new 17 Series models, while all Mahogany like the 15 Series, have Ebony fingerboard and bridge; 15 Series guitars have Rosewood (or some Rosewood type) fingerboard and bridge.
Quote from: Mikeymac on January 13, 2025, 02:02:59 PMThere are some other differences between the Martin D-15 and the new Martin D-17:
1) The 15 Series have a different, simpler top bracing than the Standard Series Martins. There are less braces and it's a totally different pattern. So the 17 Series models have what most would consider "upgraded" bracing. Part of this upgraded bracing system is a bridge with thinner wings and a smaller bridge plate under the top - both *should* contribute to better tone.
2) The new 17 Series models, while all Mahogany like the 15 Series, have Ebony fingerboard and bridge; 15 Series guitars have Rosewood (or some Rosewood type) fingerboard and bridge.
Thanks for the information. I hope there will be a demo comparing the 15 vs the 17 models. I have to give so credit to Martin for occasionally making changes to their flagship lineup.
Quote from: teh on January 10, 2025, 09:13:00 PMI would also be interested to know how the satin finish Martin D18/28 guitars would sound compared To the satin D03/40 series mahogany and rosewood models.
As you know (as an owner of both brands), the Martins will sound like Martins: strong bass and what I call subdued trebles; Larrivees also usually have good bass (more balanced with mids and trebs) and more clarity than Martins in the trebles; not thin like Taylors, but they do stand out more than Martin trebles do. But Larrivees sound like - Larrivees!
Each company certainly seems to have a "general" signature sound. However, the '99 D-02 I just picked up recently has an overall tone that leans more toward Martin, but still with a clarity in the trebles, but not so sparkly. I attribute this in part to it being 25 years old now. Really a great sounding guitar!
Quote from: William2 on January 13, 2025, 02:12:25 PMI have to give some credit to Martin for occasionally making changes to their flagship lineup.
I agree - although I'm withholding judgment depending on what this new neck shape is like...hope it's better (more full) than what they used previously on the "Reimagined" generation of guitars.
I do not like the Martin low oval profile neck either. Too skinny.
Quote from: DaveyO on January 12, 2025, 04:54:48 PMI'll put up a DO3R against a Martin D 28 any day
Exceptional guitars
I concur...did a side by side with my old D-03r. My Larry was louder and of course had better clarity than the D-28. Martins sound kinda muddy to me after play Larrivees. :smile:
It's interesting to note that there is only a $50 difference in the list price posted on the company websites between a new D-03R and a D-28. Both guitars have a satin finish and scalloped bracing. While both companies offer the option of a gloss finish, I would give the edge to Larrivee's satin finish. This is in part because I haven't played a satin finished D-28 but I've owned two satin finish Larrivees for 20 years. My personal observations are that Larrivee's satin finish is extremely durable, feels better to hold and produces a great tone. My Vancouver built P-03 and LV-03, still look brand new after 20 years while my gloss D-35 looks well played.
Another difference, Martin's Golden Era scalloped bracing uses Adirondack Spruce but I'm not sure what Larrivee uses. I do know that Larrivee used Moonwood Spruce for the bracing on my 00-24. 49 years ago, I chose a straight braced D-35 over the D-28, HD-28 and D-18. I believe the thinner 1/4" top bracing used in the D-35 was the key driver to my decision back then. I played a bunch of different guitars at the time including Martin, Gibson, Guild and Alvarez but I kept coming back to Martin.
If I'd had access to Larrivee guitars in 1976, this may have been a much different post. My son's brother in law chose a D-05 over a D-18 in part as a result of seeing and playing my two Larrivees.
I have never owned a Martin but have played some great ones in shops over the years. There was a D18 I picked up in a local shop a few years ago that was one of the nicest guitar I've ever played or heard. Better than my Larrivee? Yeah, I'd say so for sure as far as just raw power and huge sound.
But that isn't the only thing I'm looking for in a guitar. My Larrivee has clarity and nuance and I have learned how to coax out of it just what I want over the years. I have played it for over twenty years and the same would probably be true of any good guitar owned for that long. That megaphone Martin D18 could probably be tamed down a bit when taught some manners. Who knows. But I doubt it would ever have the clarity of my Larrivee.
Quote from: Silence Dogood on January 18, 2025, 08:20:43 AMI have never owned a Martin but have played some great ones in shops over the years. There was a D18 I picked up in a local shop a few years ago that was one of the nicest guitar I've ever played or heard. Better than my Larrivee? Yeah, I'd say so for sure as far as just raw power and huge sound.
But that isn't the only thing I'm looking for in a guitar. My Larrivee has clarity and nuance and I have learned how to coax out of it just what I want over the years. I have played it for over twenty years and the same would probably be true of any good guitar owned for that long. That megaphone Martin D18 could probably be tamed down a bit when taught some manners. Who knows. But I doubt it would ever have the clarity of my Larrivee.
Well, I've owned the Martin DSS-17 twice and also the Martin D-15 and now the Martin 000-15SM. Martin can make a powerful instrument. That is what attracted me to the DSS-17. It just didn't have the quality of sound I wanted from an instrument regardless the strings I used. I have no issues with the 15 series, however. In fact, it was the Larrivee D-40 that made me sell the DSS-17. I now have the mahogany sound I need for my style of playing. Getting back to the D-03 and comparing it with my D-40R, The D-03R doesn't have a sweetness of sound I get from the D-40R, but maybe that is because it is new and the D-40R is over 3 years old and is played daily. I will say the both have equal sustain and the D-03R has better note clarity of separation. I love both for different reasons. I'd say right now if I had to choose between them as a keeper glad, I don't have to), I'd probably go with the D-03R because of the clarity of the notes. I don't find any adjustments in my technique are necessary between the two instruments.
I've banged on plenty about the original bracing. Massive, massive fan. All my Larrivee's, and my Northwood I believe, have this
Martin can make a good guitar but I've genuinely always preferred my Larrivee's. The bridge spacing is so damn narrow but this year I think the high end OM18 has 2 1/4" spacing so that'll be interesting... However I think it'll cost a fortune.
I actually long for the days when I just had my OM02. Too many guitars is a distraction, for me.
I agree that too many guitars can sometimes be distracting but I keep them all in the rotation and switch up the batting order on a regular basis.
During this afternoon's heat wave (+20 degrees Fahrenheit), I was looking at the Larrivee and Martin company websites.
I noticed that Martin has 32 guitars listed as "New for 2025" including a significant number of guitars with a satin finish and/or Golden Era bracing. I think their vast number of choices would be overwhelming for a lot of buyers.
OTOH, Larrivee offers a wide range of choices and a model comparison tab that makes it easier to narrow down the choices. Larrivee also offers a OM, OMV and 000 in most of their series. Right now, they are also offering a free installation of a pickup system. While I would take a hard pass on the "barndoor" pickup, I had the Anthem pickup installed in my last two Larrivee acoustics.
My Martin rosewood OM-35 and mahogany 000 both have a 1 & 3/4" neck and 2 & 5/32" string spacing at the bridge. My right hand technique isn't sophisticated enough to tell the difference between 2 & 5/32" and 2 & 1/4" (4/32") at the bridge. If I was doing a do over today, I would be looking at the 24 and 40 series OMs.
Trying to make sense of Martin's lineup is like trying to figure out Fender's. I mean, we are supposed to believe there are really 500 different kinds of unique Strats? Same with Martin. I think it's a little silly at this point.
Quote from: Silence Dogood on January 23, 2025, 11:02:53 PMTrying to make sense of Martin's lineup is like trying to figure out Fender's. I mean, we are supposed to believe there are really 500 different kinds of unique Strats? Same with Martin. I think it's a little silly at this point.
I totally agree. Martin and Taylor keep playing games with new models every year. like why would I be interested in a CEO model LOL? I was reading on AGF forum a comment saying Andy's Taylor ideas keep getting replaced and only Mr. Taylors ideas like the neck are still in production. And these artist instruments, I wonder how many people buy a guitar just because someone's name is on it. I like that Larrivee has standard models and when they come out with something, it really is different from what they currently offer like the 24 series.
Having a large selection of models seems to be commonplace with the factory makers nowadays. Martin and Taylor appear to offer over 200. But most of the smaller factories, including Larrivee, offer around 100 or more. Apparently the costs associated with offering a large choice of models are justified.
Quote from: William2 on January 24, 2025, 05:45:18 PMI totally agree. Martin and Taylor keep playing games with new models every year. like why would I be interested in a CEO model LOL? I was reading on AGF forum a comment saying Andy's Taylor ideas keep getting replaced and only Mr. Taylors ideas like the neck are still in production. And these artist instruments, I wonder how many people buy a guitar just because someone's name is on it. I like that Larrivee has standard models and when they come out with something, it really is different from what they currently offer like the 24 series.
I like the Taylor Guitar Co., so keep that in mind as you read my comments. Taylor is a true American Dream company if there ever was one. Think of a guy starting in his garage or home shop and in his own lifetime having guitars in the hands of people (famous and not) all over the world. Some will say it was mere marketing. Well, ok, if you say so. But marketing only gets you so far. The instruments themselves apparently inspire a lot of people to buy and play them. I have put Taylor guitars in my hands over the years that have completely blown me away.
I don't know Andy and have nothing against him, but when he took over, I sort of lost interest in the company and stopped paying attention. I think the same thing might happen if Mr. Larrivee retired and no other member of his family took over. A Taylor running things makes a Taylor guitar more interesting to me. Same goes for Larrivee. Martin, Fender, Gibson -- they are just names to me at this point. Sure, names with a lot of history attached, but to me it's like buying some Nike shoes or a Chevy. Cool stuff, and good quality, but just a name ran by some faceless corporation. In fairness, Martin seems less faceless than Nike or Chevy, but still it's a machine at this point.
All these different mind-numbing model numbers surely work or Taylor would stop doing it. The collectors will have to have one of everything, and the average buyer will think he's missing out and keep buying and selling through much of the lineup.
As far as signature models, I absolutely believe people buy them because of the name on them. I've played a lot of those Clapton Martins in GC over the years. Every one of them felt really tight and uncomfortable to play. But they sell all of them. I played a Nancy Wilson model Martin once that was one of the best guitars I've ever played. The only thing I didn't like was that her name was on it. Go figure.
:wave
I got nothing for or against Taylor. They just don't sound very good. This AGF post had a guy who just pointed out that everything Powers has initiated is now not being produced. He implied that the V brace is now changing. The only guitar they ever made that somewhat interested me was the American Dream and that was because of its price and mat finish. That is also now discontinued. As a lefty player, I started out buying from Jerry's Lefty Guitars in Florida. He said Taylor was great beginner guitar because of its neck. He also said that it is most often guitar that owes in for trades. When I told Dave I was considering an American Dream, he said friends don't let friends buy Taylor LOL. He also said there are so many out there he can't give much for trade ins. To me it is just Taylor and Martin competing on new offerings each year.
For many years, Martin, Gibson and Guild were often considered the big three among U.S. acoustic guitar builders and then in the 70's Taylor joined the party. One thing these four companies have in common is the fact they have either brought in non-family members to help run the company or they have been sold multiple times.
Then along came Canadian builder Jean Larrivee who systematically built his company from the ground up including moves from Toronto to British Columbia and then to Southern California. He has mentored and trained some great luthiers who started their own companies. At the same time, Jean and Wendy have trained John Jr. and Matthew to support and continue the family tradition. They have a good business model and it's interesting to note that my first Larrivee built in 2004 has a serial number around #70,000. 20 years later, my most recent Larrivee built in 2024 has a serial number around 142,000. Contrast that with Martin who built guitar number 2.5 million in 2022 and their 3 millionth guitar in late 2024.
Quote from: teh on January 26, 2025, 04:07:53 PMFor many years, Martin, Gibson and Guild were often considered the big three among U.S. acoustic guitar builders and then in the 70's Taylor joined the party. One thing these four companies have in common is the fact they have either brought in non-family members to help run the company or they have been sold multiple times.
Then along came Canadian builder Jean Larrivee who systematically built his company from the ground up including moves from Toronto to British Columbia and then to Southern California. He has mentored and trained some great luthiers who started their own companies. At the same time, Jean and Wendy have trained John Jr. and Matthew to support and continue the family tradition. They have a good business model and it's interesting to note that my first Larrivee built in 2004 has a serial number around #70,000. 20 years later, my most recent Larrivee built in 2024 has a serial number around 142,000. Contrast that with Martin who built guitar number 2.5 million in 2022 and their 3 millionth guitar in late 2024.
I totally agree with you. I'm so glad I found Larrivee Guitars. I'd never sell them unlike the other brands I've owned. In fact, the Martin 000-15S I own, I will probably be selling sometime this year. Nothing wrong with the instrument, I just don't play it as much as the Larrivee's. And there might be another Larrivee to replace it like another 03 or that Tommy Emmanuel model.
Quote from: William2 on January 26, 2025, 04:37:06 PMI'm so glad I found Larrivee Guitars. I'd never sell them unlike the other brands I've owned.
I am glad you found Larrivee as well.
Mike
I'm glad we all found larrivee.