Hi, new to the forum. I'm a returning player after more than a decade off. I started acquiring a stable of guitars about 2 years ago. I currently have a Yamaha LL16m, Yamaha ac3m dlx and an FG5. They are all Hogs as that is what my ears like. I retired from the fire service after 25 years and my hearing is not that great...a lot of tinnitus. Anyhow, I really would like to get a couch guitar. The 00 40m looks beautiful! I can't try one as I live in the middle of nowhere. I did have a chance to play a Martin ooo-17. I really liked it but it's a 14 fret as opposed to the 12 fret oo-40. I would love to hear what anyone who owns this guitar has to say? Thanks in advance and I look forward to learning on this Forum.
First, welcome to the Larrivee Forum.
You will discover that there are a lot of experienced, knowledgable members on this site who will offer a wealth of information about all things Larrivee. John, Jr. and Matthew Larrivee even chime in on occasion. There are also several quality Larrivee dealers who visit the forum. Google Nick's Tune Up Guitars, Heartbreaker Guitars or Sweetwater Guitars to watch and listen to videos and sound clips. Be warned. If you buy your first Larrivee, it probably won't be your last.
In the interest of full disclosure, I don't own a 00-40 but I do have two "all" mahogany Larrivees including an LV03MT 12 string and a 12 fret short scale 00-24 6 string. I also have a Martin 12 fret, short scale 000 6 string that is spruce and mahogany. One common bond between these three guitars is the fact that I never played any of them in advance of buying them. That is a testament to the confidence and trust that I have with these builders.
Another plus to buying a Larrivee is the fact that either Jean, John Jr. or Matthew Larrivee will have their hands on your guitar at some point before it leaves the factory. Matt took my son and me on a tour of their operation in Oxnard, CA in June. At the time, my 00-24 was being built and I got to see and hold the mahogany top, back and sides during assembly along with samples of the bracing. I also got to meet and shake hands with several of the employees during my visit. That visit was a welcome addition to the 1,800 mile road trip my son and I made from Seattle, WA to San Antonio, TX.
Good luck with your decision.
Quote from: tiogajoe on November 07, 2024, 10:05:03 PMHi, new to the forum. I'm a returning player after more than a decade off. I started acquiring a stable of guitars about 2 years ago. I currently have a Yamaha LL16m, Yamaha ac3m dlx and an FG5. They are all Hogs as that is what my ears like. I retired from the fire service after 25 years and my hearing is not that great...a lot of tinnitus. Anyhow, I really would like to get a couch guitar. The 00 40m looks beautiful! I can't try one as I live in the middle of nowhere. I did have a chance to play a Martin ooo-17. I really liked it but it's a 14 fret as opposed to the 12 fret oo-40. I would love to hear what anyone who owns this guitar has to say? Thanks in advance and I look forward to learning on this Forum.
Welcome to the forum! It sounds like you have some nice guitars. But once you get a Larrivee I wouldn't be surprised if those Yamahas don't start to get lonely!
:tongue:
I did a search for "OO40" and several threads came up. I can't post my search results (tried), but you can easily find those discussions using the search feature. Traffic here is a bit slow so the search feature comes in handy for past discussion on particular models, etc.
:welcome:
Thank you for the Welcome. I ordered this morning from Nick at Tuneup guitars. Nice guy. He was very helpful. Now the waitng game :nanadance
Hi tiogajoe,
And welcome! Congratulations on pulling the trigger on your 00. As TEH said - this place is an incredible resource re: all things Larrivee.
As a recent owner (June) hope your 00MH is as pleasing to you as mine has been to me. IMO an extremely well crafted guitar with great balance and clarity. Has much greater projection than anticipated with the smaller 00 body size. The 12 fret neck was important because of a shoulder issue and with the body size it gets much longer play than my prior larger guitars. Mine came extremely well set up (for me) right out of the box. To add extra fun to your new 00, wait 'til you experiment with different strings! The Larrivee family builds great guitars! :nana_guitar
Quote from: Myopic Squirrel on November 08, 2024, 03:33:54 PMHi tiogajoe,
And welcome! Congratulations on pulling the trigger on your 00. As TEH said - this place is an incredible resource re: all things Larrivee.
As a recent owner (June) hope your 00MH is as pleasing to you as mine has been to me. IMO an extremely well crafted guitar with great balance and clarity. Has much greater projection than anticipated with the smaller 00 body size. The 12 fret neck was important because of a shoulder issue and with the body size it gets much longer play than my prior larger guitars. Mine came extremely well set up (for me) right out of the box. To add extra fun to your new 00, wait 'til you experiment with different strings! The Larrivee family builds great guitars! :nana_guitar
Thank You! What strings do you like? Nick is stringing mine with xs 11/52,s
Welcome to the forum and thank you for your service!
Quote from: jweave69 on November 09, 2024, 03:01:01 AMWelcome to the forum and thank you for your service!
Thank you for your kind words. I appreciate it.
tiogajoe - I'm using are Thomas/Infeld Plectrum ac111's - a light tension (130+ lbs) light gauge string for 2 reasons: 1. the light tension is easier on these old fingers 2. from another forum's post re: recommended strings for 00 mahogany guitars. Discussing guitar strings (and we all seem to hear differently) is like discussing motor oils on a car forum :roll
With his familiarity with Larrivees I'm certain Nick's choice will be a good one. Enjoy your new guitar and dive into the string rabbit hole later.
Quote from: Myopic Squirrel on November 09, 2024, 01:27:46 PMtiogajoe - I'm using are Thomas/Infeld Plectrum ac111's - a light tension (130+ lbs) light gauge string for 2 reasons: 1. the light tension is easier on these old fingers 2. from another forum's post re: recommended strings for 00 mahogany guitars. Discussing guitar strings (and we all seem to hear differently) is like discussing motor oils on a car forum :roll
With his familiarity with Larrivees I'm certain Nick's choice will be a good one. Enjoy your new guitar and dive into the string rabbit hole later.
At the moment I find myself a bit frustrated with my playing progress. I kinda hit the wall as I need to practice more a more regular schedule. I also need to start meeting other players and get together to learn from others. The idea of a smaller guitar is the hopes that it is also easier of my older beat up hands and shoulders. we'll see?
tiogajoe - FWIW - because of shoulder problems, downsizing first from a dread to an OM and then to a 00 brought significant relief, especially with the shorter 12 fret neck, resulting in longer practice/playing time. Started playing again about 2 years ago and discovered the ole digits didn't work the way they used to. Now exclusively using light strings and since the 00 is long scale, experimenting with lower tension strings (interesting tension range with light strings) and tuning down a 1/2 step which is helping with barre chord struggles.
IMO there's a lot of helpful Youtube guitar tutorials (Justin Guitar one example) to help accelerate your learning.
Good luck in your journey and have fun!
As a fellow owner of an 00-40 with rosewood back and sides, I will echo the high praise of this size and model. I absolutely love it, and it's a better strummer than my Larrivee parlor.
As for getting better, some good advice I got on this forum was to pick songs you really like and learn them. Theory is important, but playing songs is the best part of guitar, and your technique will develop as you learn the songs you like. Have fun!
I appreciate all the advice and support. I started working on some fingerstyle Christmas Music. My Guitar should be here Thursday.
Love my 00-40. Super great strummer and finger style guitar. Loud. 12 fret is great. I think you'll be super happy.
My oo-40mh arrived yesterday. What a great small guitar! The case was slightly damaged in shipping. Nick is handling that with UPS. I gave it overnight to settle into the climate in our house. The fit and finish is top notch. I do have a slight buzz on the B string between the 3rd and 5th fret. Nick said to give the guitar a few days to settle. He said it might need a small truss rod adjustment. All in all, I'm very happy with my purchase. Hats off to Nick at Tune-up Guitars! Great customer service and communication. I highly recommend His Shop.
Congrats!! Nick sold me my 00-40r, and his shop gives top notch service! Hope you enjoy your guitar as much as I do, and that the string buzz gets resolved.
NGD YAY! Congrats! :gotpics:
Quote from: jweave69 on November 15, 2024, 01:29:20 PMNGD YAY! Congrats! :gotpics:
I have to work on the pictures! I'm having an issue with the B string kind of a rattle when fretted at the 2nd and 4th frets. it's not a buzz but more of a rattle. I tried all of the usual things...string post tight to bottom of bridge, checked tuners to see if they are loose, changed the B string to a .16 from a .15, added a tweak of relief with a small turn of the truss rod. Nothing seems to help. I spoke with Nick this am. and he is sending me another saddle that is a smidge taller. It may just be the guitar? some of my other guitars have a similar sound on the B string just not as noticeable. Nick did put D darrio xs 11/52 and lower the action. He thinks the saddle may be too low. Kinda frustrated. :?
Quote from: tiogajoe on November 16, 2024, 04:41:05 PMI have to work on the pictures! I'm having an issue with the B string kind of a rattle when fretted at the 2nd and 4th frets. it's not a buzz but more of a rattle. I tried all of the usual things...string post tight to bottom of bridge, checked tuners to see if they are loose, changed the B string to a .16 from a .15, added a tweak of relief with a small turn of the truss rod. Nothing seems to help. I spoke with Nick this am. and he is sending me another saddle that is a smidge taller. It may just be the guitar? some of my other guitars have a similar sound on the B string just not as noticeable. Nick did put D darrio xs 11/52 and lower the action. He thinks the saddle may be too low. Kinda frustrated. :?
That's unusual for a Larrivee to not come setup properly...I'm glad he's trying to make it right. I'd be curious if it's a little on the dry side, that can also cause the top to sag a little...
Quote from: jweave69 on November 16, 2024, 05:25:15 PMThat's unusual for a Larrivee to not come setup properly...I'm glad he's trying to make it right. I'd be curious if it's a little on the dry side, that can also cause the top to sag a little...
I think Nick is right. He may have taken a hair to much off the saddle. The room where I keep my guitars is 45% RH. A straight edge across the lower bout shows a slight belly at the bridge. I also have been playing it so much that my wrist hurst a bit. I am not used to have my arm closer to my body on a smaller guitar. I would imagine that will go away with time.
I had an issue with a new larrivee once where I heard a distinct rattle. Took it back to the shop and the tech loosened the rattling string, took out the bridge pin and pulled up on the string while pushing the pin back in. This made sure the ball of the string was tight up against the pin. Turns out it was hanging low and the ball of the string was the cause of the rattle.
Quote from: StringPicker6 on November 16, 2024, 08:17:43 PMI had an issue with a new larrivee once where I heard a distinct rattle. Took it back to the shop and the tech loosened the rattling string, took out the bridge pin and pulled up on the string while pushing the pin back in. This made sure the ball of the string was tight up against the pin. Turns out it was hanging low and the ball of the string was the cause of the rattle.
I'm going to try that. I just ordered a set of graph tech pins from sweetwater.
Quote from: tiogajoe on November 16, 2024, 06:24:20 PMI think Nick is right. He may have taken a hair to much off the saddle. The room where I keep my guitars is 45% RH. A straight edge across the lower bout shows a slight belly at the bridge. I also have been playing it so much that my wrist hurst a bit. I am not used to have my arm closer to my body on a smaller guitar. I would imagine that will go away with time.
Well that settles that. Sounds like you're right!
Quote from: jweave69 on November 17, 2024, 10:53:30 AMWell that settles that. Sounds like you're right!
I hope? :roll
tiogajoe, congratulations on your new 00 and I'm sure you'll get it sorted out. And IMO you'll adjust to the smaller body size quickly. :thumbsup
Ok Guys. Help me out! I'm having a hard time adjusting to my new guitar. It's almost like I have to learn to play again. My finger placement is all out of Wack. The discomfort in my wrist is definitely arm positioning which I'm getting sorted out. I'm kind of having a bit of buyer remorse. Do you eventually get used to these things? I plan on going back and forth between my other guitars that are 14 frets. So far that seems easy.
Don't let buyer's remorse cloud your judgment. I don't know if this will help but here's my experience and a couple of suggestions to avoid future seller's remorse.
From 1977 to 2004, my only guitar was a 14 fret, Martin Dreadnought (D-35) with a 25.5" scale. In 2004, I bought my first Larrivee, a 12 fret parlor with a 24" scale. My last three acoustics have been 12 fret guitars with scalloped bracing including two short scale (Spruce and Mahogany 000 slot head Martin and an all mahogany 00-24 Larrivee) and a long scale (Moonwood and Walnut LSV Larrivee).
Suggestion number 1
Both of these guitars were originally strung with medium gauge strings. With one exception, all of my guitars are now set up and strung with light gauge strings. If I was in a band or I was a bluegrass flatpicker competing with a banjo or dobro player, medium gauge strings would make sense to drive the top and boost volume. Light gauge strings are much easier on the hands and easier to chord and bend. I also feel that scalloped bracing helps with responsiveness.
Suggestion number 2
Give it time. The shorter scale takes a little time to get used to but you don't have to reach as far to make chords and I've found it easier to make full and partial barre chords. Even though my 14 fret guitars get plenty of playing time, I gravitate to my 12 fretters over half the time.
I've spent a lot of time getting familiar with my 00-24 over the past month. I will be changing the strings and modifying the set up for the first time later this month.
Quote from: teh on November 19, 2024, 09:27:27 AMDon't let buyer's remorse cloud your judgment. I don't know if this will help but here's my experience and a couple of suggestions to avoid future seller's remorse.
From 1977 to 2004, my only guitar was a 14 fret, Martin Dreadnought (D-35) with a 25.5" scale. In 2004, I bought my first Larrivee, a 12 fret parlor with a 24" scale. My last three acoustics have been 12 fret guitars with scalloped bracing including two short scale (Spruce and Mahogany 000 slot head Martin and an all mahogany 00-24 Larrivee) and a long scale (Moonwood and Walnut LSV Larrivee).
Suggestion number 1
Both of these guitars were originally strung with medium gauge strings. With one exception, all of my guitars are now set up and strung with light gauge strings. If I was in a band or I was a bluegrass flatpicker competing with a banjo or dobro player, medium gauge strings would make sense to drive the top and boost volume. Light gauge strings are much easier on the hands and easier to chord and bend. I also feel that scalloped bracing helps with responsiveness.
Suggestion number 2
Give it time. The shorter scale takes a little time to get used to but you don't have to reach as far to make chords and I've found it easier to make full and partial barre chords. Even though my 14 fret guitars get plenty of playing time, I gravitate to my 12 fretters over half the time.
I've spent a lot of time getting familiar with my 00-24 over the past month. I will be changing the strings and modifying the set up for the first time later this month.
Thank Teh. I am going to get the guitar set up when I get the other saddle from Nick. I also have a set of tusq bridge pins on the way. The plastic ones seem very flimsy. I also find it strange that for an 13/4" nut the fingering feels narrow? This is giving me the most trouble as far as accurate finger placement.
When you have the set up done, discuss if different string spacing can be cut on on the nut.
Quote from: tiogajoe on November 19, 2024, 10:17:48 AMI also find it strange that for an 13/4" nut the fingering feels narrow? This is giving me the most trouble as far as accurate finger placement.
Yikes. I'd love to see a pic or at least measure the distance between the E strings and the edge of the fretboard.
My assumption has always been that Larrivee nut slots are cut wider than most others brands. I have a Taylor 322 and the E to E spacing is about 1 mm narrower compared to my Larrivee OO's.
PS - I've been following this thread without much to say, but let me offer my belated Congrats and Happy New Guitar Day! I've managed to acquire three of OO's which is the perfect guitar for me. :beer
(https://i.postimg.cc/s20GwKD2/Larr-Taylor-Nuts.jpg)
Quote from: Myopic Squirrel on November 19, 2024, 11:04:42 AMWhen you have the set up done, discuss if different string spacing can be cut on on the nut.
I will look into that. Good idea.
Quote from: jpmist on November 19, 2024, 11:50:20 AMYikes. I'd love to see a pic or at least measure the distance between the E strings and the edge of the fretboard.
My assumption has always been that Larrivee nut slots are cut wider than most others brands. I have a Taylor 322 and the E to E spacing is about 1 mm narrower compared to my Larrivee OO's.
PS - I've been following this thread without much to say, but let me offer my belated Congrats and Happy New Guitar Day! I've managed to acquire three of OO's which is the perfect guitar for me. :beer
(https://i.postimg.cc/s20GwKD2/Larr-Taylor-Nuts.jpg)
Jpmist, I have the same you do...about 3mm. I'm showing about 2mm to the bottom of the low E string at the 12th fret.
Quote from: tiogajoe on November 19, 2024, 12:14:43 PMJpmist, I have the same you do...about 3mm. I'm showing about 2mm to the bottom of the low E string at the 12th fret.
We'll now I'm curious what other guitars you're used to and what their nut spacing is? I don't have that wide a span of experience with other brands. Could the thinner Larrivee neck be giving you the "too crowded" feel you have?
If things feel uncomfortable at the nut, check the tuning between the open string and 1st frets. If there's any deviation (there usually will be) you can probably take the nut slots down slightly, which feels wonderful.
This is something that can easily get messed up so do research before adjusting. I just find that most factory guitars are left high at the nut and it gives a tighter than necessary feel when fretting open chords.
Quote from: jpmist on November 19, 2024, 02:09:21 PMWe'll now I'm curious what other guitars you're used to and what their nut spacing is? I don't have that wide a span of experience with other brands. Could the thinner Larrivee neck be giving you the "too crowded" feel you have?
My other guitars are all Yamahas. I have an FG5, LL16m, and a AC3m DLX. All of them are Mahogany. They all have a 13/4" nut except the AC3 which has a 1 11/16". The Finger placement issue I've been having is sorting itself out. I spoke with Nick and he feels the oo 40 length and small size is giving me my problems. He suggested going to an ooo or the sd-40? The oo 40 is just over 38" long. The ooo and sd are 40.5 inches. That is right in line with my current herd of guitars. It was very generous of Nick to offer this as a solution. I went into purchasing this guitar just wanting a smaller bodied guitar. I did go back and forth between the 00 and 000. He does have ooo's in the simple 6 series and an 000-o3m which I'm not familiar with. The Sd seems to be an interesting animal. It has a lot of fans in the FB group. He has an SD-40r with a moon spruce top. The Sd is just a tad smaller than my FG5 but its body is 21" compared to 20" on the FG. I don't have an EIR is my herd, so the SD is tempting. Anyway, more to think about. If I am honest with myself, I do feel the oo size is probably not a good fit for me. I did play a Martin ooo-17 14 fret and really liked it. I just couldn't get past the plain look. That's what lead me to Larrivee for the same kind of money and a hard case to boot. My AC3 is pretty much an OM cutaway so a Larrivee OM really isn't adding to any Diversity in my guitar herd.
Buying guitars online is such a crap-shoot, it's great that your guy Nick is working with you.
Armchair spitballing, my first thought is that going from Dreadnoughts to an OO has changed the wrist angle of your fretting hand which may be what's taking used to. But I suppose that depends on how often you play up the neck as opposed to strumming. I'm surprised you haven't commented on the change in tone to a smaller body. I prefer it, but those used to dreadnoughts and larger might not.
I'm likely wrong but I thought the SD had a wider 1 13/16" nut. I once owned a neck that width and could never get used to the stretch involved in making C and G shapes. I do a D/C shape often up the neck and making that pinky reach the A string was often hit or miss. I'd recommend the OOO as I had one once. It being a 12 fret, it had a wonderful full tone.
Best of luck with it!
Quote from: jpmist on November 20, 2024, 03:50:47 PMI'm likely wrong but I thought the SD had a wider 1 13/16" nut. I once owned a neck that width and could never get used to the stretch involved in making C and G shapes. I do a D/C shape often up the neck and making that pinky reach the A string was often hit or miss. I'd recommend the OOO as I had one once. It being a 12 fret, it had a wonderful full tone.
SDs are 1 & 3/4 now. Used to be 1 & 7/8.
Even their 3 baritone models (BT03, 03R & 40R) are all 1 & 3/4 nut width now. Used to be 1 & 7/8.
Quote from: Queequeg on November 20, 2024, 05:40:24 PMSDs are 1 & 3/4 now. Used to be 1 & 7/8.
Ah, thanks for the correction. I recall they were wider than 1 3/4" in the past . . .
Nick has located an 000 40r and he has an 000-03m that he special ordered. It has the older style bracing.
Quote from: tiogajoe on November 20, 2024, 08:33:59 PMNick has located an 000 40r and he has an 000-03m that he special ordered. It has the older style bracing.
I went with the ooo-40r that Nick located. It's at Larrivee now. They will ship to Nick and so on. Once again, I cannot say enough good things about Nick. Outstanding customer service! Great Guy.
I hope the 000 works better for you. I know the smaller size of the 00 can be a big change from playing larger guitars.
Everyone should have an L body. :wink:
Quote from: StringPicker6 on November 22, 2024, 04:53:34 PMI hope the 000 works better for you. I know the smaller size of the 00 can be a big change from playing larger guitars.
I feel pretty confident it will.
Joe - very interested in your take on the 000, especially the comparison between the rosewood and mahogany.
Yes I'm also always interested in hearing re wood, bracing, body distresse and what others think. What WE each individually think is obviously the important thing but it's interesting, nonetheless.