Pages: [1]   Go Down
  Print  
Author Topic: D-03R headstock finish bubbling /peeling away  (Read 122 times)
JohnBee
Newbie
*
Offline Offline

Posts: 1




Ignore
« on: December 05, 2018, 11:33:14 AM »

I have a new to me D-03R and the head-stock finish seems to have failed - peeling, bubbling etc.
Does anyone know what options exist to fix this?

Based on what I'm seeing, it seems to be separating in various areas and without any apparent trauma.
I removed the nut and noticed the finish flaked off the trailing edge, though there was no adhesive between the two - it takes very little for it to flake off
Logged
Rockysdad
Senior Member
***
Offline Offline

Posts: 127




Ignore
« Reply #1 on: December 05, 2018, 04:38:11 PM »

 gotpics? , It might help if we could see what is happening.
Logged

L-10, L-03FM.
& "others"
ducktrapper
Donuts?
*****
Offline Offline

Posts: 11497




Ignore
« Reply #2 on: December 05, 2018, 04:38:19 PM »

I have a new to me D-03R and the head-stock finish seems to have failed - peeling, bubbling etc.
Does anyone know what options exist to fix this?

Based on what I'm seeing, it seems to be separating in various areas and without any apparent trauma.
I removed the nut and noticed the finish flaked off the trailing edge, though there was no adhesive between the two - it takes very little for it to flake off

If you bought it new, the first thing to do is contact your dealer. Larrivée is very good with warranty issues.
Logged
B0WIE
Gold Member
****
Offline Offline

Posts: 1377




Ignore
« Reply #3 on: December 05, 2018, 10:29:37 PM »

As Duck said, if it's new, it's covered.
If it's used, you'll have the finish removed and re-sprayed. There can be any number of things that might cause this. It usually comes down to prep, but it's not limited to that.
Logged

D-09 Brazilian w/ Eagle inlay. D-02-12
Used to own and love; SD-50, J70 maple Mermaid, SD60sbt, D03R, LV03E.
Pages: [1]   Go Up
  Print  
 
Jump to: