Pages: [1]   Go Down
  Print  
Author Topic: 2003 D-03R endpin problem  (Read 462 times)
AWHsum
Newbie
*
Offline Offline

Posts: 1




Ignore
« on: August 23, 2015, 03:46:20 PM »

I just aquired a Larivee D-03R acoustic electric......what an instrument..however the 1/4" endpin jack is loose and will not tighten...are there any instructions or archived information on the installation of this endpin jack available.......Please Help
Logged
eded
Gold Member
****
Online Online

Posts: 2068




Ignore
« Reply #1 on: August 23, 2015, 04:17:53 PM »

Here is (probably) more than you wanted to know...

http://www.fishman.com/files/switchjack_install_guide.PDF

My guess is that you have one of two issues here.  Either, the outside nut is loose or the inside backing nut is not adjusted properly. 

If it is the outside nut (small dress nut in that link), you'll need to remove the strap nut, hold the jack body still (I usually use a small finish nail) and tighten the outside nut.

If it is the inside backing nut, you'll need to remove the strap nut, then the outside nut.  Then pull it out far enough to adjust the inside backing nut and then reassemble in the hole.

Ed
Logged
Pages: [1]   Go Up
  Print  
 
Jump to: