Poll
Question: How deep is your Parlor at the tail?
3-1/2" - 0 (0%)
3-7/8" - 5 (100%)
4-1/8" - 0 (0%)
4-1/2" - 0 (0%)
something else (please post) - 0 (0%)
Total Voters: 5

Pages: [1]   Go Down
  Print  
Author Topic: How deep is your Parlor?  (Read 661 times)
gitnoob
Senior Member
***
Offline Offline

Posts: 620




Ignore
« on: April 02, 2010, 06:27:52 PM »

In a recent post, Randy listed Parlor specs thusly:

Parlor
· Lower Bout: 13.25"
· Upper Bout: 9.5"
· Waist: 7.75"
· Depth: (3.5") or (3-7/8),(4-1/8"),(4.5"?)
· Scale Length: 24"
· Nut Width: 1 & 3/4"" (44.3mm or 1.75")(first 500 manuf had 1-11/16 nut)
· Fretboard Radius: Compound (17" to 21")

I just measured my P-01, and it's a little more than 3-3/4" deep (3.78").   I'll call it 3-7/8" for poll purposes.

Larrivee has usually listed the Parlor depth at 4-1/2", so I'm curious if anybody has a deep-bodied Parlor.
Logged

Gits: 2004 P-01K, 2005 OM-03MT
Uke: Kala KA-ASKS with Larrivee Flamed Koa
Chops: fingerstyle noob
AZLiberty
Gold Member
****
Offline Offline

Posts: 1893




Ignore
« Reply #1 on: April 03, 2010, 05:39:42 AM »

Mine is 3.620 deep at the very end of the endblock.  However it is substantially deeper as you go towards the bridge since the back has a bit of an arch to it.  My calipers obviously can't reach that far, but eyeballing it I'd say it's 3.725 or so.

Mine is one of the very first 0-01 Parlors.

A deeper parlour would be pretty sweet.  Especially If we could get one inn Cedar/Walnut. 
Logged

OM-03RE,
D-03R-12,
Parlor
LS-03 Forum-III #34 (IS/MH)

http://www.cdbaby.com/cd/markhorning
dcarey
Senior Member
***
Offline Offline

Posts: 907




Ignore
« Reply #2 on: April 03, 2010, 10:41:42 PM »

My P-09 reads 3 7/8"

Logged

"Time flies like an arrow..Fruit flies like a banana"
Townes Van Zandt
Corky
Senior Member
***
Offline Offline

Posts: 175




Ignore
« Reply #3 on: April 04, 2010, 03:23:17 AM »

 afro  sounds like a Bee Gees song.   bigrin
Logged
Pages: [1]   Go Up
  Print  
 
Jump to: