Rough edges on frets

[dpicker]

I just received an L-03 and i noticed the edges of the frets are ruogh compared to my Taylor GA4. has anyone filed the edges down on there frets to take the rougness away?

[bearsville0]

So were the frets on my L-03 WL. I expect that from a guitar fresh from the factory. Mine wasn't too bad but it didn't hurt to take it to my local luthier for a set up, smooth out the frets and shave the bracing a little to bring out a fuller sound. I've done the same with my other guitars over the years.

I mean, the L03WL only cost 900 bucks.

[dpicker]

I was just wondering if anyone has filed or sanded the frets them self. i have refinished guitars and done many repairs but i have never had to do a sand job of frets. has any done this and how did they do it. any help will be appreciated. the guitar is new.

[unclrob]

There are a few treads on this subject.I'd try d type "DY" but I s**k at it.If you want call me and I'll try and explain it to you.My number is in my web address.

[rrgguitarman]

[I was just wondering if anyone has filed or sanded the frets them self/quote]

Hey Doug, take Rob up on his gracious offer, he is very, very knowledgeable! He has helped many of us on this forum!

It isn't difficult once it is explained.

[dpicker]

I called Rob and he was very helpful exsplaining how to do the job and were to buy the file. he is a very nice guy. thanks for all the help.

[dpicker]

excuse my spelling, my fingers go faster than my fingers.

[dpicker]

My fingers go faster than my brain.

[Calvin]

Uncle rob is a great encyclopedia of guitar servicing knowledges.

But I just thought I mention that make sure your guitar is humidified.  Dryness can cause your frets' edges to stick out.  Cheers.