Pages: [1]   Go Down
  Print  
Author Topic: fishman rare earth 'humbuck' and 30W Crate amp?  (Read 633 times)
joopie
Senior Member
***
Offline Offline

Posts: 413




Ignore
« on: July 21, 2006, 10:54:12 PM »

plan to make this my first set up (w/ OM-03)- any thoughts?

thanks,  :mellow: R.
Logged

OM-18V
ronmac
Gold Member
****
Offline Offline

Posts: 4051


WWW

Ignore
« Reply #1 on: July 22, 2006, 12:52:54 AM »

That's a great pickup. You need a good EQ and a amp with some headroom. It works well as a dual source with K&K minis.

I have no experience with that amp.
Logged

Ron

joopie
Senior Member
***
Offline Offline

Posts: 413




Ignore
« Reply #2 on: July 22, 2006, 01:25:46 AM »

That's a great pickup. You need a good EQ and a amp with some headroom. It works well as a dual source with K&K minis.

I have no experience with that amp.

thanks ronmac- here is some info on the amp-

 :mellow: J. (kindastoked)

The CA30DG features 30W, a Crate 8" high-fidelity speaker, special design tweeter, and award-winning onboard digital signal processing including a variety of reverb, delay, chorus, and multiple effects settings. 2 channels allow for instrument input and your option of vocals or an auxiliary source like a CD player or another instrument. Also includes 3-band EQ, 1/4" line out, slant-front cabinet, and an effects loop for mixing in external effects.

CA series amps feature Evergreen Tolex covering and earthtone metal grilles for the best in quality design with organic aesthetics. They continue the tradition of premium sonic performance that has made Crate acoustic amplifiers a favorite. Award-winning onboard Digital Signal Processing (DSP), including a variety of reverbs, delays, chorus, and multiple effects settings, with an extremely versatile EQ section that gives players access to high-end studio monitor system playback sound. Just like a studio monitor system, the CA series all feature a polypropylene speaker cone woofer with a rubber surround and an efficient high-frequency component.

Features:

30W
Crate 8" high-fidelity speaker
Special-design tweeter
Award-winning onboard Digital Signal Processing including a variety of reverbs, delays, chorus, and multiple effects settings
2 channels
3-band EQ
1/4" line out
Slant-front cabinet
Spring reverb
Effects loop
Specifications:

Output power rating: 30W RMS @ 1% distortion
Equalization: Low +/-15dB @ 80Hz;  Mid +/-15dB @ 400&Mac220;1.2kHz; High +/-15dB @ 10kHz
Internal impedance: 1.5M ohm
Internal sensitivity: 20mV RMS
Sens. to line out: 20mV
Max input signal: 10v RMS (28v peak to peak)
Insert jack: .7v RMS, Line In .7v RMS
Insert jack input impedance: 44k ohm
Insert jack output impedance: 2.2k ohm
Line out impedance: 2.2k ohm
Internal speaker: 8" Poly cone coaxial with dome tweeter; & nbsp 4 ohms; & nbsp 50 watts; 1" voice coil
Power requirements: 120VAC, 60Hz, 60VA; 100/115VAC, 50/60Hz, 60VA; 230VAC, 50/60Hz, 60VA

Logged

OM-18V
Pages: [1]   Go Up
  Print  
 
Jump to: