Pages: [1]   Go Down
  Print  
Author Topic: Exceedingly hot B string?  (Read 5355 times)
aboss
Member
**
Offline Offline

Posts: 98




Ignore
« on: June 23, 2006, 04:24:59 PM »

Hey all, have a question... I play an LV-03E and as such it has the larrivee factory B-Band pickup. My guitar sounds beautiful on its own, but i am losing a lot of its character when plugged in. The biggest specific problem i'm having is a really really hot b string. My b rings out so loud above the others, that i'm forced to compensate with the equalizer... which makes my guitar sound super-dead. I know this isn't an uncommon problem , but does anyonre know of anything i can do to fix it? I'm playing at a graduation ceremony (for my little sister, awww. lol.) this coming tuesday, and I want my baby to sound like she truly should... and currently the pickup just isn't doing her justice.

aboss
Logged

'06 Larrivee LV-03E
'03 Art & Lutherie Cherrywood
dberch
Gold Member
****
Offline Offline

Posts: 2039


WWW

Ignore
« Reply #1 on: June 23, 2006, 05:15:43 PM »

A quick fix is to pull the saddle, and the pickup, and make sure everything is perfectly flat and completely free of dust/debris.  Any little imperfection can cause that.  Take some 150 grit sandpaper to the bottom of the saddle, and clean the pickup and slot.  If that doesn't do it there's a thread somewhere about adding a clay shim that's supposed to work wonders.  I'll see if I can find it.

Update: the link to the clay shim trick is no longer working.  Contact forum member Little Brother for details, it's his technique.

Hope this helps, and good luck at the greaduation gig!
David
Logged

So many songs - so little time...
Finger Picking good Folk, Blues, Gospel, Roots, Rags, and Originals
www.davidberchtold.com
djsonovox
Senior Member
***
Offline Offline

Posts: 292




Ignore
« Reply #2 on: June 23, 2006, 06:07:38 PM »

If your B-Band is an undersaddle pickup, you can take a rat-tail file and hollow the area over the b string. I had the same problem with a 12-string undersaddle, and that fixes it. A Taylor 214 I put un undersaddle in had a way loud A string! I fixed it by beveling it away from that area. It's a bit of work, but the results are worth it.

Doug J
Logged

Larrivee (1996) LC-09
Martin (2007) D-28
Aria AD-80
Seagull S6/Cedar
Epiphone Masterbuilt 500N
Yamaha FG-512 12-string
Eko Ranger XII 12-string, EMG undersaddle p/u
Tacoma Thunderchief bass
Vantage VS-695B Electric Bass
Rickenbacker (1986) 330-12 Mapleglo  blk h'ware
Flea Ukulele
Lanakai Bari Uke
aboss
Member
**
Offline Offline

Posts: 98




Ignore
« Reply #3 on: June 23, 2006, 06:41:37 PM »

Thanks for the replies! It IS an undersaddle pickup, however how my lack of guitar-repair knowledge is going to make itself apparent.  :huh: I can handle removing and sanding the saddle (i've done that before to adjust the action) ...but whats the best/safest/easiest way to remove the pickup to clean/inspect it? i definetly don't want to hurt anything. I am planning on replacing my strings tonight or tommorrow anyway, so i'm figuring that would be a good time to check things out.
Logged

'06 Larrivee LV-03E
'03 Art & Lutherie Cherrywood
bing4sons
Gold Member
****
Offline Offline

Posts: 1104




Ignore
« Reply #4 on: June 23, 2006, 09:15:43 PM »

I doubt there is anything wrong with the pickup.  The B-Band UST is super thin.  As such it's more sensitive to imperfections in the bottom of the saddle.  I've had this issue.  With most of the guitars I've had, it was fixed with sanding the bottom of the saddle, making sure it's completely flat, like dberch said.  I tape the sand paper to a board and run the saddle back and forth across it.  It doesn't take much to make a difference.

With my L-09fm, I had to put a small strip of post it note, below the saddle, below where the b-string makes contact.  Someone had suggested that on the B-Band site, when they used to have one, and it worked.
Logged

Bing

Larrivee J-09FM
Taylor 814ce
Music Man Axis SS w/piezo
ronmac
Gold Member
****
Offline Offline

Posts: 4051


WWW

Ignore
« Reply #5 on: June 24, 2006, 08:14:16 PM »

Another thing to look at is your signal chain. If you are using a passive DI with inferior transformers you could be geting serious loading or ringing, causing huge phase shifts and attenuations.
Logged

Ron

Pages: [1]   Go Up
  Print  
 
Jump to: