Larrivee Guitar Forum

Main Forums => Technical Discussion => Topic started by: 1dimeblues on December 30, 2012, 04:28:08 AM



Title: guitar has been repaired please close or remove thread thanks
Post by: 1dimeblues on December 30, 2012, 04:28:08 AM
guitar has been repaired,
thanks all
please close or remove thread


Title: Re: my parlor needs binding repair
Post by: brandon on December 30, 2012, 04:44:04 AM
I think stewmac.com may have what you need. You could fix it yourself and save some money or I'm sure a local luthier or repairman could do it pretty easily.


Title: Re: my parlor needs binding repair
Post by: brandon on December 30, 2012, 04:46:39 AM
http://www.stewmac.com/shop/Bindings,_trim/Plastic_binding/Black_Plastic_Binding.html?actn=100101&xst=3&xsr=57

Something like this would work I imagine.


Title: Re: my parlor needs binding repair
Post by: Barefoot Rob on December 31, 2012, 04:40:14 AM
Don't sand your best off scraping with a razor just go slow.Modal glue is all you need.Tape off the fingerboard surface and below the binding area so if you get any squeeze out it doesn't get on the wood.Put glue on both surface's wait for it to get tacky,put on the binding and tape into place leave it alone overnight.As always if I can help pm,email or call. :thumb


Title: Re: my parlor needs binding repair
Post by: 1dimeblues on December 31, 2012, 07:26:12 PM
Quote
As always if I can help pm,email or call

awesome

thanks so much unclrob and everyone else

this guitar was a " rescue "  from a pawn shop

amongst 35 black strat copies and les paul copies, and rogue, johnson and esteban acoustics.....

so there are diamonds in the rough, needles in a haystack, etc.   :nanadance


Title: Re: my parlor needs binding repair
Post by: ffinke on December 31, 2012, 07:35:09 PM
The proverbial "Diamond in a goat's arse". You definitely got the diamond at (hopefully) a good price. Treat the little guy to some TLC and get a good setup to go with your find. You'll treasure it forever.

f