D-03R headstock finish bubbling /peeling away

[JohnBee]

I have a new to me D-03R and the head-stock finish seems to have failed - peeling, bubbling etc.
Does anyone know what options exist to fix this?

Based on what I'm seeing, it seems to be separating in various areas and without any apparent trauma.
I removed the nut and noticed the finish flaked off the trailing edge, though there was no adhesive between the two - it takes very little for it to flake off

[Rockysdad]

  , It might help if we could see what is happening.

[ducktrapper]

I have a new to me D-03R and the head-stock finish seems to have failed - peeling, bubbling etc.
Does anyone know what options exist to fix this?

Based on what I'm seeing, it seems to be separating in various areas and without any apparent trauma.
I removed the nut and noticed the finish flaked off the trailing edge, though there was no adhesive between the two - it takes very little for it to flake off

If you bought it new, the first thing to do is contact your dealer. Larrivée is very good with warranty issues.

[B0WIE]

As Duck said, if it's new, it's covered.
If it's used, you'll have the finish removed and re-sprayed. There can be any number of things that might cause this. It usually comes down to prep, but it's not limited to that.