Orsino Polishing A Lacquer Finish

[The Third]

I posted this a while back but I think it got lost in the thread...Does anyone have any thoughts on whether this would be advisable on an ultra-thin lacquer finished cedar top?  

I would really like this guit up a little, but the manufacturer, of course, highly advises against anything of this sort (as most do).  Any pitfalls you can see?

[Imapickn]

Which guitar is it?
Don

[The Third]

Art & Lutherie cedar dred.

[Peter Cree]

As long as it doesn't void your warrenty.........the nitro has to be a certain thickness to adhere and to buff out.  so it can't be all that ultra thin that you can't polish it.

Meguires scratch X will do a wonderful job.  I use it on nitro all the time.

Trick to it is using the cotten cloth on a small wedge of flat wood.  that get's into the bridge and fretboard areas and doesn't leave that ghosting around those areas.

[The Third]

As long as it doesn't void your warrenty.........the nitro has to be a certain thickness to adhere and to buff out.  so it can't be all that ultra thin that you can't polish it.

Meguires scratch X will do a wonderful job.  I use it on nitro all the time.

Trick to it is using the cotten cloth on a small wedge of flat wood.  that get's into the bridge and fretboard areas and doesn't leave that ghosting around those areas.

Am I understanding you to say to wrap a cloth around a small piece of wood so that I can get into these small areas in order to keep the application/buffing consistent?

Peter, do you recommend just the scratch x to polish out the finish or do you also do another step?  Thanks for your help.