Anyone put Bigsby on RS4 ?

[ST]

Can you guys see this?



It's from the Larrivée facebook page.

https://www.facebook.com/search/str/larrivee%20forum%20iii/keywords_top

[Cybercanyon]

That would be serial #5 Forum V.   

[igrishenko]

And?  How is that working for you?

Sorry I took so long to respond! It's working great! I love everything about it. The Vibramate is a great option, especially if you don't want your Bigsby to be a permanent fixture on your guitar. It's a great tool to have in case you ever want to put your tail piece back on. The I haven't had any issues with the roller bridge and installation was super easy. It just dropped right in place

[Mikeymac]

Can you guys see this?

So that roller bridge was installed at the factory?

[Cybercanyon]

So that roller bridge was installed at the factory?

Yes it was, both of my RS4's with Bigsby's were installed at the factory with the schaller roller bridge.  One has the stop mounts the other one doesn't.

[Mikeymac]

Yes it was, both of my RS4's with Bigsby's were installed at the factory with the schaller roller bridge.  One has the stop mounts the other one doesn't.

"Stop mounts"? Please educate me. 

[Cybercanyon]

"Stop mounts"? Please educate me. 

I was referring to the anchor points for theTonePros TailStop Bar.  One RS4 has the anchor points the other RS4 (Forum V) doesn't.

[headsup]

Here is a couple close ups of mine, factory installed, one of two made (bigsby/gold tops).
Anchor stops evident, and I strongly suggest buying the scholar roller bridge with side to side adjustment.

[Walkerman]

OK....I want to install a no drill tremolo and a roller bridge....what parts do I need to order?  Thanks
what is the difference between the bigsby and vibramate?

[ST]

Vibramate = no-drill mounting for a bigsby.

http://vibramate.com

[Walkerman]

Has anyone put a B5 on a RS4?  How did it fit?