F-IV special order 00-03MT by the forum & Trinity Guitars

[ST]

Here are some specs. from the 00-03 special order.

                                                  Tuning Gears Larrivee Gotoh


                                                  Bridge String Spacing 2 3/16"

Hi Danny,

So this is a correction and update from the previous 2 3/8"?

[Danny]

Hi Danny,

So this is a correction and update from the previous 2 3/8"?

It's just what I saw on the 00-03 ; not our order, but they should be the same.

[Denis]

It's just what I saw on the 00-03 ; not our order, but they should be the same.

I was looking at the pics of the 00-03 on the LA Guitar Sales site and I'm not sure but are they made in the US?  It looks like it says made in California on the label?

[Sabatini]

I was looking at the pics of the 00-03 on the LA Guitar Sales site and I'm not sure but are they made in the US?  It looks like it says made in California on the label?

Yes, Denis, that label says "Made in California" and under that "United States of America."

[Denis]

Yes, Denis, that label says "Made in California" and under that "United States of America."

That's what I thought it said...does this mean the FIV 00-03MT will be made in the US too?  I was under the impression that it was being made in Vancouver.

[Randy_R]

That's what I thought it said...does this mean the FIV 00-03MT will be made in the US too?  I was under the impression that it was being made in Vancouver.

The mystery deepens....   

So who is going to the NAMM show in a couple weeks and can get the straight scoop from Jean & Sons?

[Queequeg]

The mystery deepens....   

So who is going to the NAMM show in a couple weeks and can get the straight scoop from Jean & Sons?

Good question.
And deepening even further, I search the NAMM directory at the Anaheim Convention Center for:
Gibson: check
Godin: check
Collings: check
Fender: check
Yamaha: check
Larrivee: Search Results: No Results Found. Search Again?

[JOYCEfromNS]

When we say Larrivee Gotoh which Gotoh model is that? 510 21:1 Contours    ???????

[Denis]

When we say Larrivee Gotoh which Gotoh model is that? 510 21:1 Contours    ???????

Not exactly...again, based on the pics up at the LA Guitar Sales page, they look like the least expensive Gotohs, the basic enclosed tuners.

[Randy_R]

Not exactly...again, based on the pics up at the LA Guitar Sales page, they look like the least expensive Gotohs, the basic enclosed tuners.

Larrivee has been using Pings for a number of years, but recently went to Schallers on the higher end models unless I'm mistaken.

[Denis]

Larrivee has been using Pings for a number of years, but recently went to Schallers on the higher end models unless I'm mistaken.

Right but for some reason, the 00-03, at least according the LA Guitar Sales, has Gotohs.  I'd take any Gotohs or Schallers or Grovers...I've never had problems with Pings but if the 00-03MTs get any of the other brands I mentioned instead I will be very happy.

[Randy_R]

Right but for some reason, the 00-03, at least according the LA Guitar Sales, has Gotohs.  I'd take any Gotohs or Schallers or Grovers...I've never had problems with Pings but if the 00-03MTs get any of the other brands I mentioned instead I will be very happy.

I see that now on their web page for the 00-03's.

LAguitar sales has been active on this forum recently, lets see if they care to comment...

[Mikeymac]

Larrivee has been using Pings for a number of years, but recently went to Schallers on the higher end models unless I'm mistaken.

My RS-4 has Schallers.

[Danny]

  My LSV-11e had Schallers as well. So who knows what we will get or where it will be built or when.             
              (It's black hole time, I think)

[morrow22]

My OM-05 had Schallers

[Danny]

   I just saw something that amused me on the UMGF. They are putting together ideas for another UMGF forum guitar.

          Anyway, here is the 6th post

                            "If the LARRIVEE Forum guys can get it done... "

                                     That's the whole post.            Yup, we can get er done

[lyric_girl]

   I just saw something that amused me on the UMGF. They are putting together ideas for another UMGF forum guitar.

           Anyway, here is the 6th post

                              "If the LARRIVEE Forum guys can get it done... "

                                      That's the whole post.             Yup, we can get er done

Too funny!

[Danny]

                        

                               (Here are the specs. again, so that no one need search for them)


                                                  Specifications for the Forum IV Guitar

00-03 mahogany top
body length ( without neck ) 19 3/8th
Width upper bout 10 1/8th
width lower bout  14 1/8th
depth at butt end of guitar 4 1/4th
depth at neck end of body  3 3/8th
one piece mahogany neck with ebony headstock overlay , silver border and pearl logo
ebony fingerboard
nut width 1 3/4th
2 3/8th* string spacing at bridge                                      *we are not sure on this yet
back strip
herringbone rosette
12 fret neck

                           You must put a 25% deposit down with "Trinity Guitars" to order this one.
                                                       Contact Jim Holler for the price.

Jim Holler, Luthier
Trinity Guitars
800 West Third St
Jamestown, NY 14701
716-665-4490
JimHoller@TrinityGuitars.com
www.trinityguitars.com
" What we do in this life will resound throughout eternity"



                                               (There is a cut off date of January 15th to place an order)

[Randy_R]

In case anyone new sees this. There is strong doubt that the string spacing at the bridge will be 2-3/8. 2-3/16" is normal for Larrivee and is what all 00's have measured previously.

[PCT57]

This post is so amusing and regularly brings a smile to my face

Wish I was getting one of these guitars though