Anyone own a Crafter guitar?

[rrgguitarman]

Are this any good?
They certainly look nice.
Any thoughts?

[bluesman67]

I played a lefty a couple months ago, dread w/ c/way and p/u.  Not exactly what I was looking for but it sounded pretty good.  I ended up buying a Norman w/ a cedar top because it felt and sounded best to me after looking at S&P, Crafter, Yamaha, Seagull, and Alvarez.  The only one I like almost as much as the Norman was the Seagull.  The Norman has a warm tone that sounds good picking or strumming at any intensity level.  I guess Norman sells a lot of guitars in Europe, but there aren't many dealers in the USA.  Of half a dozen stores in my area, only one sold them.

[Fredmando]

I have one of their small bodied travel guitars. The workmanship is amazing.
I know of a guy who uses a Crafter for all of his stage work.

[rrgguitarman]

I ended up buying a Norman w/ a cedar top because it felt and sounded best to me after looking at S&P, Crafter, Yamaha, Seagull, and Alvarez

Normans are hard to beat...actually the whole LaSido family of guitars are hard to beat.

I have one of their small bodied travel guitars. The workmanship is amazing

I've heard that about these guitars.
I wonder why they are so hard to find in the States? I've seen them online.

[bluesman67]

Normans require set up work to be a good playable guitar though.  The saddle and nut needed tweaking with the D,G, and B strings riding too high.  I think they do that so when it ships tfrom the factory so that no matte where it ends up, whether the store has good climate control or not, they are all "playable" off the wall without any buzzing, compensating for environmental shifts that would make it harder to sell.   Anyways, a good set up makes them very playable.

[rangerich]

   I've had 2 Crafter guitars. One was the 050 slothead the other was a 008 mahogany dred. They were OK for the money, very solid construction and looked great. The sound would not be confused with a Larrivee, Martin etc. The ones I had were pretty sloppy inside. Having said that I think in the $500 price range they are a consideration. I have not seen their more expensive models so I can't comment. There were quite a few on ebay a few years back as resales and they went cheap. It is very possible the quality control has got better.
                                                         Rich

[rrgguitarman]

The sound would not be confused with a Larrivee, Martin etc. The ones I had were pretty sloppy inside.

Not in my lifetime 

I'm looking at getting a "BEATER" something I can just leave on top of the couch or even on the floor if the mood strikes me.


I've also been looking the Cort and Morgan Monroe.

[el guitana]

I've had the Crafter travel guitar and it was a gem. Gave it to the USO to ship to troops overseas, and I miss it. The workmanship was very tidy, and the sound was great. other Crafters in that shop seemed very nice, with solid tops. I was surprised.

I currently own 2 Cort solid tops, and they are also surprisingly good. Look at the Cort Earth series.

[Yurinaut]

I used to have the Crafter Travel guitar (TRV-23). Solid top w/cutaway. Satin finish. It was very tidy and I dare say, might even rival out hallowed parlors in the sound department. For the money, they are a deal. They also offers a solid wood series (Engleman/Bubinga or Engleman/Indo Rosewood) and have a slot head triple w/ a 1.75 nut I've been eye balling for a while (TA080 I think). These things are pretty popular in the UK but haven't caught on in the US.

The only thing that bugged me was the nut width on the TRV-23. I want a 1.75 and it was 1-11/16. That little bit of difference sure makes me clumsy. I really wish that slot head was solid back and sides but it can be had at a really reasonable price. The GAS just never stops...

[ducktrapper]

The kind of phony generic name, Crafter, throws me off some. Doesn't exactly make me want to try one. Too close to Kraft. Maybe it's a cheezwhiz guitar! I mean you either love or loath cheezwhiz, doncha?

[Mr_LV19E]

I just sold my Crafter TC 035 to my buddy up north. I used it all summer and it had a really nice sound but it was the 1 11/16 nut that made me sell it. It did well for light strumming and fingerpicking but it really excelled in the tone dept. when playing notes up the fretboard. For a $200 guitar it was a real gem. If you want something you don't have to worry about and sounds decent and has good playability you should check them out. Mine was a orchestra body style with Rosewood back and sides and Engelman solid top, cutout with electronics. Oh and it had enough clearcoat on it that you could use it for a coaster for your chilled drink.

[Parlor Picker]

I read somewhere that Cort and Tanglewood come out of the same factory.  Maybe Crafter do as well?? I don't know, but think they're all made in South Korea.

I tried a slot-head Crafter in my local guitar shop this week - sort of 000 size.  The workmanship was very good and the sound surprisingly good for a cheap guitar (it was marked at £299 - so about $600 at today's exchange rate). It had a solid Engelmann spruce top and laminated back and sides (think it was rosewood from memory).  It would be a great guitar for a beginner or someone looking for a beater that's not too crappy - or even for someone who just can't stop buying more guitars....

[el guitana]

I read somewhere that Cort and Tanglewood come out of the same factory.  Maybe Crafter do as well?? I don't know, but think they're all made in South Korea.

I am sure Cort is the factory, and Tanglewood is one of the brands. Looking at Crafters, I think you may be right.
The Korean guitars are very good these days. Crafter is a side brand of Hohner.

[JohnM2001]

The kind of phony generic name, Crafter, throws me off some. Doesn't exactly make me want to try one. Too close to Kraft. Maybe it's a cheezwhiz guitar! I mean you either love or loath cheezwhiz, doncha?

Or maybe too close to Crapter??     never tried one, just joking.  One of my guitar playing pals, great player, loves his Crafter thin/hollow acoustic/elec for jazz box tones. 

[z-clay]

I've played a handful of the Crafter branded guitars. Hit and miss quality at best. Nut was way too high on most.   

[Michael T]

2007 thread? Going back a bit but if we get more info why not.  

[mas music]

 I've played a few. They make a great Taylor Knockoff.

[BluesMan1]

   I played one about 3 days ago that just blew me away. A TV200/NV, Engelman top, solid HOG back & sides, OM size, discontinued model. Had it put in the back of the store on hold. For around $400 (discounted), I just couldn't let it get away. One cool guitar that sounded great! Sides are tinted, so it looks almost like RW.
   Made in Korea, but would never know it. It's not crap. Also has a different bracing for the top, a "T" pattern? Tapped the upper bout, not too much sound. Lower bout, LOTS of sound! This one was just picked up @ the NAMM show. Comes with EXP's also, not my fav (don't like coated strings), but the setup was nice. I was surprised @ how well it was put together, esp. the fret work. Was better than the Larrivees in the store, even the OM-05. Have to give the builders of this guitar credit for nice work (@ least on this one?Only one like it I've seen).
  Here's a pic. It didn't have a P/G, had a slight tint to the top, & cool looking amber colored tuning buttons. Plus the sound, just can't be beat!

[attachment deleted by admin]

[bigpineapple]

My previous guitar before I purchased my new Larrivee was a crafter...



HATED THE THING.

It was a good guitar to start on, but beyond that... I can't really say many good things about it.
I didn't pay alot for it, so I guess...for the price it was a good buy.

Now I have my new Larrivee, i'm 100% happy. I still keep my crafter though as Tommy Emmanuel's signed it for me! For that reason alone, i'll always keep it as a little memento  

[BluesMan1]

   Just bought a TV 200/NV. As described in my previous post. Think these are hit or miss. This one was picked up @ the recent NAMM show, a discontinued model. All solid woods, HB inlaid rosette, amazing sound (& I've played some of the best). With a HSC & tax got it for $500 out the door. Was just plating it. Needs a little set up, but not much. Most are laminate bodies, solid tops, but have ALOT of models to chose from. The sound? Just what I'd expect from an OM costing 3x's more!
   Unlike Chris' & others, mine isn't sloppy on the inside, is well crafted (no joke!), & plays great. Doesn't sound like a Larrivee or a Martin, but is it supposed to? Has a big, balanced sound of it's own & is priced right to take with me anywhere. I wouldn't be ashamed to play this anywhere. Got lots of compliments on the sound when I was playing it in the store, right before I went home with it! The bracing is what Crafter calls T-bracing, like an inverted capital T shape. Has a concave look to the braces, having more wood removed than normal scalloped bracing. My top is responsive & the HOG body is a perfect fit for the aged Engelman top.
   Popular in Europe for years, now more so in the US as they get more exposure. Do have some cheapie models that I had played before & didn't like. Then this one came back from the NAMM show & was hidden in a bunch of others. Pulled it down, played it, put it back. Played a Larrivee, sounding different of course. Pulled the Crafter down again, played it some more & inquired about it. Like I said before, had the owner put it in back for me to think about. Took 3 days to make my mind up.
   Not a piece of crap, or like "Kraft" cheese!! Have to look hard & find one that just stands out?