pearse armrest?

Started by joopie, June 01, 2006, 10:59:22 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Quote from: DVGuy on June 03, 2006, 03:04:18 PM
Which one fits an L series best?

I'm not sure but I ordered the Slimline Junior just a few minutes ago from Elderly for my OM-03SP.

I am curious how much of difference it will make.  I'm going to buff out the satin on the back and sides first, the add the armrest.

i think i'm gonna go w/ the regular slim- i'll post a pic once it's on...

:mellow: J.
OM-18V

Denis, please post some pics when it arrives. I am considering one for my OM.
Ron


put my order in this morning-  :wacko:

:mellow: J.
OM-18V

I don't like the idea of adhesives on my Larrivee. I read an article a while back by a luthier, explaining a procedure he uses to repair a crack in the side of a guitar. It might have been Frank Ford but I'm not sure. Anyway, he uses rare earth magnets to hold a temporary brace in place to make the repair. One on the outside and one inside the body.They are very strong little magnets.

If I could attach one or two magnets to the arm rest then use something, a soft piece of cloth or a thin strip of veneer, on the outside of my guitar to protect the finish, then put the other magnet or magnets inside the body of my guitar to hold the arm rest in place without adhesive I might consider buying one.

Sound plausible?

http://www.rare-earth-magnets.com/

Maybe one on each end of the arm rest each paired with another magnet on a flat spot on the insde side of the guitar. Just a thought...
:huh:

That is a solution that you could try. It would even make using the armrest on several guitars an option.

I have used the armrest on a few different guitars and have had no finish issues when they were removed, even after a couple of years.
Ron


Well....the armrest on the Parlor just isn't gonna work out... :angry:.  When I play my parlor I find it most comfotable for my arm to rest on the top too far around the lower bout (toward the centerline of the guitar) for the arm rest to fit the curve.  On an my OM it would fit nicely at the top of the lower bout where my arm crosses...but I don't really want on on my purty OM.  So I think this one may be going back...I know a few people have mentioned reshapping them to fit the curve But I think this would be fairly major reconstruction...oh well.  It was a good thought.

Blue
OM-05MT "Mary Helen"
Silvercreek T-170
Harmony Herd (1203, 162, 165, 6362)

I found this kind of amusing. -- I did a search for John Pearse and found his personal site. On the opening page, he's pictured with a small-bodied guitar with an armrest on it. Then I clicked on "gallery" at the top of the page and it showed me another page with a half dozen photos on it. He's playing 3 different guitars where you can see there's no armrest on them. That's bad for business, isn't it?

Who has reshapped their arm rests?  How did you do it?  I think it would be pretty serious for my parlor....I'll have to take some pics to illustrate.

Blue
OM-05MT "Mary Helen"
Silvercreek T-170
Harmony Herd (1203, 162, 165, 6362)

I got my ebony armrest yesterday for my D 03.  They sent me the junior size not the original that I wanted but I was excited when I saw it decided to use it anyway. The he guitar seems to have a little more punch and it looks nice. Anybody know how much bigger the original is than the junior?  I don't think it's that much.  Any insights are appreciated, anybody else have a junior size on a D model?
Guild DV52
SD 40 MH

Sutton,
If you check out the JP website you can find printable templates of the different sizes that you can cut out and compare.

Blue
OM-05MT "Mary Helen"
Silvercreek T-170
Harmony Herd (1203, 162, 165, 6362)

Thanks Blue!
Guild DV52
SD 40 MH

Quote from: Blue in VT on June 05, 2006, 01:24:27 PM
Who has reshapped their arm rests?  How did you do it?  I think it would be pretty serious for my parlor....I'll have to take some pics to illustrate.

Blue

Here's a photo of a John Pearse Slimline Jr. on my parlor.
Did a little reshaping on a belt sander after cutting about 5/8" off the skinny end.

[attachment no longer available]
"Time flies like an arrow..Fruit flies like a banana"
Townes Van Zandt

Anybody ever try the left hand armrest on their right hand guitars as the JP website suggests?  I think they're trying to say that if you play a dreanought, and pick near the bridge, the left hand model may work better.... :huh:  don't know...
Guild DV52
SD 40 MH

dcarey,
thanks...shes's acutie...glad to hear that I'm not the only one who needs some mods to their armrest...the placement of yours would work for me if I played in the classical position most of the time...however I typically play in the more standard postion (over my right leg)...and, especially, when I am palm muting my arm crosses the edge of the lower bout pretty far down...see red line in pic....I would also love to have the armrest cover up the dinger on the top and be in position for classical playing as well ...see blue line( similar to you placement).  While the arm rest (as shipped) will fit where the blue line is it can't do both...and the shape is all wrong for the red line location....so.....damn....maybe I should attempt to make my own???

Anyone out there ever make there own armrest?  finding ebony might be hard but I suppose any harwood would probably work...

Blue

[attachment no longer available]
OM-05MT "Mary Helen"
Silvercreek T-170
Harmony Herd (1203, 162, 165, 6362)

Just got my slimline junior for my OM about 15-20 minutes ago in the mail.  I'll post a review after it's been on for a few days.  We'll see how much of a difference it makes.  I might get one for the parlor next.

I don't like the idea of adhesives on my Larrivee.

Well, FYI, that is not a concern . . . especially on your Larrivée.

I've got the armrest on all of my acoustics.  Have removed and replaced, repositioned them on several and there is not an issue regarding any damage to the finish.

In fact, the finish on the Larrivée is one that is the least likely to have damage . . . not from the adhesive (which is a 3M product by the way) but in general.

Guitars are built to last generations, they're not fragile little things . . .
Johnson L Body
A&L AMI
Cort Earth 900
Taylor Big Baby
Gold Tone PBR
Regal RC-51
Fender R48
Ariana Classical
Seagull Artist Grand
Gibson SJ
Gibson J-55
Taylor 355
Taylor 414
Larrivée L-05
Guild D-55
Taylor 614ce
Taylor 714ce
Taylor 814c
Kent archtop
Silvertone archtop
Les Paul Custom

man, i have been super busy! little time for the guitar :<>...
i did get my armrest and put it on- butttt, i have a problem! it does not sit flush- THERE IS A GAP BETWEEN THE TWO ENDS- i assume it is worped or something- otherwise i love it and it does increase volume! i will try to get pics this weekend w/ my inferior digital...
:mellow: J.
OM-18V

Here's the one I custom "altered" for my Taylor 814

Johnson L Body
A&L AMI
Cort Earth 900
Taylor Big Baby
Gold Tone PBR
Regal RC-51
Fender R48
Ariana Classical
Seagull Artist Grand
Gibson SJ
Gibson J-55
Taylor 355
Taylor 414
Larrivée L-05
Guild D-55
Taylor 614ce
Taylor 714ce
Taylor 814c
Kent archtop
Silvertone archtop
Les Paul Custom

Powered by EzPortal