Ebony Pins with large slots?

Started by rrgguitarman, May 04, 2010, 08:04:09 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

I'm hoping that someone here has dealt with this issue and has an answer.

The ebony pins that came with my Larrivee D-09 have slots that are too narrow to

accommodate Medium strings. I also have the same problem with my L-03WL

The only way that I've been able to put Mediums is to use Tusq Pins.

Is there a way to make the slots wider and deeper? or are there pins that are sold that way?

Thanks.
Ruben

Its a major pain in the but and it would be best to buy other pins then to carve out the one's you have.
A REPAIRPERSON,Barefoot Rob gone to a better place
OM03PA
Favorite saying
 OB LA DE OB LA DA,LIFE GOES ON---BRA,It is what it is,You just gotta deal it,
One By One The Penguins Steal My Sanity, Keith and Barefoot Rob on youtube
Still unclrob
#19
12 people ignoring me,so cool
rpjguitarworks
Call PM me I may be able to help

Quote from: rrgguitarman on May 04, 2010, 08:04:09 PM
I'm hoping that someone here has dealt with this issue and has an answer.

The ebony pins that came with my Larrivee D-09 have slots that are too narrow to

accommodate Medium strings. I also have the same problem with my L-03WL

The only way that I've been able to put Mediums is to use Tusq Pins.

Is there a way to make the slots wider and deeper? or are there pins that are sold that way?

Thanks.

I have a L with standard ebony pins and play mediums exclusively.  I have absolutely no trouble with them. Pins are just there to push the string balls under the bridgeplate, aren't they?
Chris
Larrivee's '07  L-09 (40th Commemorative); '09 00-03 S.E; '08 P-09
Eastman '07 AC 650-12 Jumbo (NAMM)
Martin   '11 D Mahogany (FSC Golden Era type)
Voyage-Air '10 VAOM-06
-the nylon string-
Goya (Levin) '58 G-30
-dulcimer-
'11 McSpadden

Having the slotted pins helps to keep the string from cutting into the bridge wood.





:cop:Wait a couple of seconds before you begin your attack I'm old and seem to have something wrong with my leg this week,must be the humidity.
A REPAIRPERSON,Barefoot Rob gone to a better place
OM03PA
Favorite saying
 OB LA DE OB LA DA,LIFE GOES ON---BRA,It is what it is,You just gotta deal it,
One By One The Penguins Steal My Sanity, Keith and Barefoot Rob on youtube
Still unclrob
#19
12 people ignoring me,so cool
rpjguitarworks
Call PM me I may be able to help

Quote from: unclrob on May 04, 2010, 10:29:55 PM
Its a major pain in the but and it would be best to buy other pins then to carve out the one's you have.

Hi Rob,

HOW?

Thanks.
Ruben

Quote from: unclrob on May 04, 2010, 10:39:28 PM
Having the slotted pins helps to keep the string from cutting into the bridge wood.





:cop:Wait a couple of seconds before you begin your attack I'm old and seem to have something wrong with my leg this week,must be the humidity.
Bummer! Probably from that exquisite storehouse of knowledge so overflowing. Beyond what 2 humans could duplicate  :beer :wave
Chris
Larrivee's '07  L-09 (40th Commemorative); '09 00-03 S.E; '08 P-09
Eastman '07 AC 650-12 Jumbo (NAMM)
Martin   '11 D Mahogany (FSC Golden Era type)
Voyage-Air '10 VAOM-06
-the nylon string-
Goya (Levin) '58 G-30
-dulcimer-
'11 McSpadden

You have to have incredable control with a dremal or a hand held wood carving tool.You need to build a jig to hold it in place while doing the work.You need to go VERY VERY SLOW,so you don't over do it.Best thing to do is replace them with one's that fit.
A REPAIRPERSON,Barefoot Rob gone to a better place
OM03PA
Favorite saying
 OB LA DE OB LA DA,LIFE GOES ON---BRA,It is what it is,You just gotta deal it,
One By One The Penguins Steal My Sanity, Keith and Barefoot Rob on youtube
Still unclrob
#19
12 people ignoring me,so cool
rpjguitarworks
Call PM me I may be able to help

QuoteYou have to have incredable control with a dremal or a hand held wood carving tool

That leaves me out!

What are the right size?
Do different (manufacturer) fit the Larrivee and have larger slots?

Its never easy...

Thanks Rob
Ruben

I'm not sure.I have been using tusq now for about 10 years and have no complaints.
A REPAIRPERSON,Barefoot Rob gone to a better place
OM03PA
Favorite saying
 OB LA DE OB LA DA,LIFE GOES ON---BRA,It is what it is,You just gotta deal it,
One By One The Penguins Steal My Sanity, Keith and Barefoot Rob on youtube
Still unclrob
#19
12 people ignoring me,so cool
rpjguitarworks
Call PM me I may be able to help

Looks like Tusq is going to reign...

Thanks Rob
Ruben

Quote from: unclrob on May 04, 2010, 10:39:28 PM
Having the slotted pins helps to keep the string from cutting into the bridge wood.

:? :? :?

On my long-gone 000-15S I used a sharp pen knife and whittled the ebony pins until they fit it correctly.  Labor of love, I guess, and it worked out fine.

Better still to call Bob Colosi and order the correct sized pins.
Play it daily for best results.

QuoteBetter still to call Bob Colosi and order the correct sized pins.





I don't want to go down the bone route...too bright.

Thanks.
Ruben

GA-ME I covered myself with my escape clause. :bgrin:
A REPAIRPERSON,Barefoot Rob gone to a better place
OM03PA
Favorite saying
 OB LA DE OB LA DA,LIFE GOES ON---BRA,It is what it is,You just gotta deal it,
One By One The Penguins Steal My Sanity, Keith and Barefoot Rob on youtube
Still unclrob
#19
12 people ignoring me,so cool
rpjguitarworks
Call PM me I may be able to help

How many of the pins are too tight? You probably need to work on just one or two right? Did you put them back in the same holes they came out of?
:coffee  :donut2  :donut   :donut
Roger


"Live simply so that others may simply live"

Quote from: Mr_LV19E on May 05, 2010, 05:51:23 PM
How many of the pins are too tight? You probably need to work on just one or two right? Did you put them back in the same holes they came out of?
:coffee  :donut2  :donut   :donut

Two of the pins, E and A

I always change strings one at a time, so, yes, the way they came out.

My Larrivees are not too bright with Tusq but my Taylors don't really care for Tusq and I have the same problem with them (same size pins)

Ruben

Maybe try a little sandpaper folded over to widen and deepen the slot, it may take a while to remove enough material but it's just two pins. I have never heard of them making different size slots for bigger strings but as usual I could be wrong. I have bought oversize pins but that was outside diameter.
Roger


"Live simply so that others may simply live"

Powered by EzPortal