Mic question??

Started by Mr_LV19E, October 31, 2009, 02:51:05 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

I see performers on TV and such tossing their mic around and in general just handling it rough.  If I just touch my mic, mic stand or cable every little touch comes out the amp speaker. Just holding the mic and allowing your finger to move on it slightly causes noise transmission. What am I doing wrong or not doing that causes this?  I have a shure SM58 and a shure PG58 mic and a Genz-Benz amp.
Roger


"Live simply so that others may simply live"

There are a lot of things you can do at a sound board to buffer and limit the amount of thuds and such that can come from handling a mic fairly rough. But, I would think the main thing that you are doing is playing for smaller audiences in smaller venues having the mic's pick you (or your guitar) up a distance away. 

When you have a monstrous venues with hundreds, if not thousands, of people and stacks of amps with every instrument mic'd, the ambient noise swallows up these sounds. You will probably notice that these performers are very close to their mic's, and I see a lot of them actually touching the wind screen with their lips as they sing, and you would be surprised at how powerful their voices are. When you are throwing that much sound at a mic, you can turn it down quite a bit and that will limit a lot of the ambient noise as well.

There is some technique to to as well. Holding the mic solid will limit the noise no matter how much movement the mic goes through. But, I would probably attribute the man running the sound board with a lot of the credit. Believe it or not, he probably determines more about how good they sound than anyone on stage.
"The barrier to knowledge is the belief that you have it"

2006 Larrivee LV-10 MR   1980 Les Paul Custom Natural   2008 Larrivee LV-03-12   1998 Carvin LB75 Koa Bass

It sounds like the mic's have gone microphonic.This is when the cartridge in the mic has gone bad or is going bad,the mic is over sensitive picking everything up.Have them checked out.
A REPAIRPERSON,Barefoot Rob gone to a better place
OM03PA
Favorite saying
 OB LA DE OB LA DA,LIFE GOES ON---BRA,It is what it is,You just gotta deal it,
One By One The Penguins Steal My Sanity, Keith and Barefoot Rob on youtube
Still unclrob
#19
12 people ignoring me,so cool
rpjguitarworks
Call PM me I may be able to help

Quote from: unclrob on October 31, 2009, 04:22:19 PM
It sounds like the mic's have gone microphonic.This is when the cartridge in the mic has gone bad or is going bad,the mic is over sensitive picking everything up.Have them checked out.

I  bought them new a couple years ago and they have been like that from day one.  They only get used in the music room by my wife and I.  What is involved in checking a mic out?


Dale, I guess it makes sense that if you get closer to the mic you can turn it down.  I don't have a sound man.  :humour:
Roger


"Live simply so that others may simply live"

Bring your cables and mic to a local store and ask if you can plug them in.If there fine then have your board checked.So you know I've gotten new mics that were bad.
A REPAIRPERSON,Barefoot Rob gone to a better place
OM03PA
Favorite saying
 OB LA DE OB LA DA,LIFE GOES ON---BRA,It is what it is,You just gotta deal it,
One By One The Penguins Steal My Sanity, Keith and Barefoot Rob on youtube
Still unclrob
#19
12 people ignoring me,so cool
rpjguitarworks
Call PM me I may be able to help

Quote from: Mr_LV19E on October 31, 2009, 08:49:49 PM
They only get used in the music room by my wife and I. 

In that quiet of an environment you will probably hear every bump and breath. Similar to a studio, where there is not a sound that escapes being picked up, you just need to be hyper-vigilant. That's why whenever you see studio singers, or even voice over work, they will always have windscreens between the mic and the person. Live is definitely a whole different world.
"The barrier to knowledge is the belief that you have it"

2006 Larrivee LV-10 MR   1980 Les Paul Custom Natural   2008 Larrivee LV-03-12   1998 Carvin LB75 Koa Bass

Another solution to the noise problem is to employ a high pass filter on your mic and cut-out everything below 100Hz.  There is typically a button on each channel of your mixer that will do this.  That will cut out a lot of the handling noise while not affecting vocals at all.
How do you make God laugh?  Tell Him your plans.


I don't have a mixer, just plug into my amp. I think I'm just over sensitive to noise. I have lowered the level and moved closer to the mic, this has made a difference.
But thanks everyone for the info, I understand now why performers with sound men can get away with the rough handling.
Roger


"Live simply so that others may simply live"

Quote from: Mr_LV19E on October 31, 2009, 08:49:49 PM
I  bought them new a couple years ago and they have been like that from day one.  They only get used in the music room by my wife and I.  What is involved in checking a mic out?
Are you sure they are not 'Chinese made'?

Quote from: fongie on February 07, 2010, 06:49:26 PM
Are you sure they are not 'Chinese made'?

Pretty sure, how would I tell the difference?
Roger


"Live simply so that others may simply live"

Here is an article that gives you some indicators of fake product: http://homerecording.about.com/od/microphones101/a/Fake_Shure_Mics.htm

Ron


Quote from: ronmac on February 08, 2010, 06:16:45 PM
Here is an article that gives you some indicators of fake product: http://homerecording.about.com/od/microphones101/a/Fake_Shure_Mics.htm


Thanks for the link, I'm pretty sure it's a Shure.    :wink:
Roger


"Live simply so that others may simply live"

Powered by EzPortal