removing pickguards?

Started by joethedestroyer, March 26, 2008, 11:48:24 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

I read in another topic somewhere here about how someone removed their pickguard...  is that a relatively easy procedure?  I think when I get a hog top I'd like it without the pickguard, though I love the larrivee tortoise shell on my d-03r
Larrivee D-03R "Marie"
www.joereitzphoto.com

Lots of info here...and it's really easy.  Heat it with a hairdryer.  Pull it off....SLOWLY....wipe up any remaining adhesive with naptha.  Voila!

Justin
OM-03 MT Custom (Cree Studios "Fish Guitar")

I took mine off in 2 easy steps:

1 - Lift the edge of the PG
2 - Yank it off

It worked.

:cheers

Quote from: the creature on March 26, 2008, 12:40:16 PM
I took mine off in 2 easy steps:

1 - Lift the edge of the PG
2 - Yank it off

It worked.

:cheers

I did the same thing with several pickguards.  Never had any problems but I think "yanking" it off should be done slowly too.  It's not exactly like pulling off a band-aid...right creature?

PLEASE go slowly.  I am actually planning the same thing for my Larrivee (and replacing the clear guard with a tortise colored one).  Living in Chicago, i am going to wait for the weather to warm up a bit so the "resting" temp of the guitar is a bit higher and then there should be less risk of pulling up some spruce...good luck and let us know how it goes!

oh, I'm still a long while from obtaining my hog top.  The heat gun idea sounds like it could warp or otherwise harm the wood...  and as for the yanking...  I don't know that I have the stomache for that.
Larrivee D-03R "Marie"
www.joereitzphoto.com

REMOVAL OF OLD PICKGUARD

Just a repost of something I did that may be of interest to you.












Mcilroy A30C, 2005
Yamaha FG-512, 1978
Custom Built Orchestra Model

Previously Owned:
Larrivee L-10 Special Edition, 2002
Larrivee Classical, 1977
Larrivee LV-05E, 2005
Larrivee P-09
Larrivee OM-05 custom
Larrivee OM-03
Larrivee D-03R, 1997

If it's the clear one, be sure to fold it back on itself as you pull. I think heat is unnecessary with that type myself. For stiff pickguards you can try dental floss, heat and naptha.

 :cop:    STOP    !!!!!!!

PLEASE do a search of pickguard removal on this forum and AGF and FRETS.com before you try to get your pick guard off.
It is not a difficult proceedure, BUT, about 2 years ago, someone on this forum (i think) was taking his off and a large piece of the spruce top slivered off and left an ugly gash in the top.  So please read as much about it as you can before proceeding.

Go Slow........go slow.........slow........           DONT YANK AnythingUse heat very carefully
Naptha can be your friend and help prevent problems.

Joe, please dont live up to your forum name       :winkin:

ds   :beer
L-03 BlackWood..... "Pluck"
OM-03- MT Forum #14/17
F-III IS/Hog #63/78....SOLD
Seagull Artist Folk
Pono and Kanile'a Tenor Ukulele's
The real Day Sailer...1966 Day Sailer..the boat, not the person

Quote from: Daysailer on March 26, 2008, 08:21:42 PM
Joe, please dont live up to your forum name       :winkin:

ds   :beer


I'd have to agree with you Daysailer, nice save!  I've seen several horrors when it comes to pulling up pickguards, e.g., various degrees of spruce slivers taken out; finish chipping off past the edges of the old pickguard; new pickguard not covering old area and leaving pronounced discoloration, etc....  I'd definitely err on the side of caution.  Good luck!
Larrivee D-09
Washburn D-10S
Framus Classical Archback
Fender Jazz and P-Basses

"Snap snap, grin grin, wink wink, nudge nudge, say no more?" (Eric Idle)
Dum spiro, spero. (Cicero)

I agree...don't risk loseing some spruce, hog, or whatever.  Also since I have seen some crazy things happen, I think it would be a "safe" thing to add in here. Don't use the Naptha while heating or you may do a Jimi Hendrix on your Gittar and your self. You probably knew that.   Danny

Powered by EzPortal