It's begun....

Started by AgeOfEmpires, May 05, 2010, 10:35:11 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

The L-03BB is being Tonerited as I type.  Going to run until Sat night on low-medium setting, checking in on it once or twice per day.  I sure hope the folks here and all those posts at the Collings forum are right.  Keeping my fingers crossed....   

If things turn out right, the OM-03R will be next.

My Tonerite, Gen 3, is on the way.  So, I'll let others know of how it goes on my F-III and D-18GE.  I think both guitars will benefit as their tops are pretty stiff.  My '74 LoPrinzi won't see the Tonerite.  It is sitka-IRW sweetness in a dread package. 
Play it daily for best results.

Have had a ToneRite on my OM-60 with the Adi top - its been running about a week, and the volume difference and responsiveness difference is quite obvious - so are the bad strings that are on it. I plan on replacing those and seeing how it sounds in the next day or so -
Bunch of Larrivees - all good -
and a wife that still puts up with me, which is the best -

Question about this:  Can tone-righting a top help stabilize it against cracks from lack of humidity?  I'm thinking the two have little to do with each other, but I've heard that with aging comes less of a chance of cracking from volatile humidity levels.  I think these two types of age are different, but maybe not?
Larrivee L-04Re
Gibson ES125
Lanakai Concert Acoustic/Electric Uke (eh, Plugged in it sounds good)

Quote from: yosephroth on May 10, 2010, 01:16:22 AM
Question about this:  Can tone-righting a top help stabilize it against cracks from lack of humidity?  I'm thinking the two have little to do with each other, but I've heard that with aging comes less of a chance of cracking from volatile humidity levels.  I think these two types of age are different, but maybe not?

I think it is mostly about the "relaxing of parts" in their relative glued-in position i.e. bracing, bridge, bridge-plate, fretboard extension onto the soundboard. These parts are located in every conceivable direction other than the direction of the grain of the top.
Another factor is different materials expanding/contracting at relatively different rates than spruce with changes in humidity. I believe these are the main ingredients that cause stresses within the guitar top, and tend to relax with extended vibration, whether by playing, or other mechanical means.
"To me...music exists to elevate us as far as possible above everyday life." ~ Gabriel Faure

Powered by EzPortal