Custom Orders?

Started by macallan12y, June 22, 2008, 05:58:50 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

I love Larrivee and I am looking for a new guitar with specific specs.

I want an OM-03R with a 24.5 or 24.9" scale length and a 1.68" nut width.  I am primarily
a blues player who doesn't need much string spacing.

I could also be interested in a P-03R with it's standard scale length but with a narrower
(1.68") nut.

Can either of these guitars be made for me?  I can get the specks that I want from Martin
but Larrivee guitars sound a lot better for my music.  Across the board, the sound better
from the P series to the D series.  I am not sure how they do it but there is just
something special about these guitars.

The last official statement I saw was that the custom shop is closed for a while. But, never say never, as we have seen some minor tweeks to the standard models come out. I'd try to get one of the major dealers to be your champion.
Randy R., Georgia, USA
Opinions available. Inquire about qty discount.
Forum Guitar III LS03 #15 ser no 108519

Quote from: macallan12y on June 22, 2008, 05:58:50 PM
Can either of these guitars be made for me?  I can get the specks that I want from Martin
but Larrivee guitars sound a lot better for my music.

I felt the same way when I was looking for a mahogany OM with a cutaway and no pickguard. Larrivee was my first choice cause I love the Larrivee sound but I couldn't find one with these specs and Larrivee doesn't do custom orders for regular folks. I ended up buying a Martin OMC-18LJ (I always said I'd never buy a Martin after they moved some of their production to Mexico but they were the only one's who had the specs I wanted. BTW, my Martin OM sounds incredible!
Guitars: Larrivee P-05; National Resphonic Style 2 Squareneck;      National Resophonic 12-fret "B"; Dupont MD-50;
Lazy River Weissenborn; Robert Sayers custom flat-top;
Cervantes Crossover; Todd Korup banjo-uke; McSpadden dulcimer;
PRS 22 semi-hollow ltd.; PRS DC3
Amplification: RA-400; Rivera Venus 3

Quote from: Randy_R on June 22, 2008, 06:23:50 PM
The last official statement I saw was that the custom shop is closed for a while. But, never say never, as we have seen some minor tweeks to the standard models come out. I'd try to get one of the major dealers to be your champion.

I had a D-03, which I loved but sold because I needed a 335 style guitar that I need for a project.  I don't know much about the construction of acoustic guitars but there is something about the timber of Larrivees that the competitors don't have.  Sure, some of them sound great but great in a different way.  I could get a Martin 000-28 and I would sound like Eric Clapton and I like him.  I like him a lot but when I play the blues on a Larrivee, it feels like I sound like me.  The necks just aren't right for me.  I am wondering if there are some older Larrivee models that I should look for that better meet my requirements.   

There's definitely some older models that come with a 1 11/16ths neck.  I've read that some of the earlier models OOO's came with the smaller neck, among others.  However other folks on this forum could chime in with what was made in the past with a somewhat narrower neck.  I don't know of any with a short scale.

There is one place I have come across that has the narrower neck in stock.  I have not done business with these folks so cannot comment either negative or positive.  But check out this link, and scroll down to their traditional -50 series list of guitars available:  http://www.wildwoodmusic.com/Inventory/Guitars/Larrivee.htm

They list the following guitars with 1 and 11/16th necks that usually come with 1 and 3/4":  OM-50, OMV-50

I realize that these are not rosewood, but perhaps this dealer could make that happen for you?

If anybody else has any experience with this dealer, please chime in, as they have a very interesting inventory.
Scott

RS-2

Powered by EzPortal