Not sure about other manufacturers but from what I see, all Sloped Dred guitars that Larrivee makes are done with a 12 fret neck. So, I'm not into dred sizes but this seems unusual to me given that dreds are the larger sized guitars compared to the 000 and smaller that I normally associate with the 12 fret neck. Regular Larrivee dreds are the expected 14 fret neck.
Anyone know why Larrivee builds these SD's this way?
Traditionally, dreads were slope shouldered with 12-frets to the body. For example, the first D-28 was built that way for a couple years. Remember, 12-fretters came before 14-fretters in history (the 12-fretter, of course, growing out of the classical guitar). When Martin switched to the 14-fret dread, they reduced the upper bout to allow access to those last two frets, leaving the more squared look on the 14s (the bridge is roughly in the same place as a Martin 12-fret dread).
So, in Larrivee's case, I'd say it's a nod to history. I think they've done a great job on the look of the SDs, which are more elegantly shaped than a square shoulder 14-fretter, IMO.
Maybe a nod to the first dreads?
https://vintagemartin.com/MartinDitson.html (https://vintagemartin.com/MartinDitson.html)
Sorry if I don't understand the question but this is traditional (as said above), and many companies today make the same dread but usually call it "DS" rather than "SD". Classical guitars were still the "normal" guitar when the SD/DS came about. The 14 fretter was designed in the 30's to accommodate for banjo players transitioning to guitar in the jazz era.