Main Forums => Technical Discussion => Topic started by: Chrispatel on July 13, 2013, 05:43:15 PM

Title: Bridge Pin Replacment for OM60
Post by: Chrispatel on July 13, 2013, 05:43:15 PM
Does anyone have a recommendation for bridge pin replacements for my OM-60?

Thanks in Advance!
Chris
Title: Re: Bridge Pin Replacment for OM60
Post by: L07 Shooting Star on July 13, 2013, 11:34:39 PM
Hi and welcome to the forum.

You might get a few more suggestions if you elaborate on why you want to replace the current pins.  Tone improvement potential?  Aesthetics?  Fit problems? etc.

Kurt in Edmonton, Alberta, Canada
Title: Re: Bridge Pin Replacment for OM60
Post by: AZLiberty on July 14, 2013, 01:37:00 AM
All Larrivees take standard 3-degree pins.

I;d probably just get some nice ebony pins from Stewmac or LMII.
Title: Re: Bridge Pin Replacment for OM60
Post by: Walkerman on July 14, 2013, 09:02:57 AM
I'd get some premium dark walrus fossil pins from Bob Colosi.

(http://i4.photobucket.com/albums/y122/travette/DSC_0127.jpg) (http://s4.photobucket.com/user/travette/media/DSC_0127.jpg.html)
Title: Re: Bridge Pin Replacment for OM60
Post by: brandon on July 14, 2013, 07:14:38 PM
Another vote for Colosi.
Title: Re: Bridge Pin Replacment for OM60
Post by: JOYCEfromNS on July 14, 2013, 09:25:29 PM
Quote from: Walkerman on July 14, 2013, 09:02:57 AM
I'd get some premium dark walrus fossil pins from Bob Colosi.

:drool:
Title: Re: Bridge Pin Replacment for OM60
Post by: CJ on July 15, 2013, 09:24:13 AM
Quote from: AZLiberty on July 14, 2013, 01:37:00 AM
All Larrivees take standard 3-degree pins.

I;d probably just get some nice ebony pins from Stewmac or LMII.

Yup. I bought a set of bone (white), buffalo horn (black) and ebony (black) pins to try. Tried them in complete sets and mixed them up according to a few recommendations I found - suggesting some pin materials were more suited to certain strings than others. In the end, I preferred the ebony pin sets in my Larrivees, and the bone set in my Crafter. Found an ebay seller that had nice ebony pins with abalone dot for a good price, and a nice (artificially) aged bone set with abalone dot. Funny how it came down to deciding the abalone dot diameter - I don't like 'em Orphan Annie eye-big, nor pig-eyed small.  :winkin:

Artificially aged bone looked nice with the aged golden color of the Crafter cedar top.

Tone from the ebony seemed woodier, with bone, brighter / more articulate. The buffalo horn ones were bright but I detected a hint of raspiness with them. What some people call jangly, I guess?
Title: Re: Bridge Pin Replacment for OM60
Post by: headsup on July 17, 2013, 12:07:40 AM
I'm partial to these for my OM-60.
I believe they're called "cats eyes".
ebony pin, brass ring, abalone dot inside.

not sure where i got them though, it's been a while......
Title: Re: Bridge Pin Replacment for OM60
Post by: AZLiberty on July 17, 2013, 09:46:48 PM
Quote from: headsup on July 17, 2013, 12:07:40 AM
I'm partial to these for my OM-60.
I believe they're called "cats eyes".
ebony pin, brass ring, abalone dot inside.

not sure where i got them though, it's been a while......

Parisian Eye, and LMII carries them in a couple of styles:
http://www.lmii.com/products/mostly-wood/bridges-pins/bridge-pins-wood-and-plastic
Title: Re: Bridge Pin Replacment for OM60
Post by: Chrispatel on August 04, 2013, 07:50:55 PM
Orderd some new bone Colosi's  should ship out Monday!

Chris