Does anybody know what the difference is between a D10 and a D72 if both seem to have the same cosmetic embellishments?
They are not the same cosmetically, I'm not sure where you got that.
The D-72 has the absolute top grade woods, abalone around the fretboard extension, back of guitar, and foot of the neck, butt of guitar. And headstock inlay.
If you're familiar with Martins, its like the difference between a D-41 and a D-45.
And the D-72 is extremely rare.
Quote from: Randy_R on May 31, 2010, 07:06:48 AM
The D-72 has the absolute top grade woods,
There is another grade of wood above the 10 series :?
There is not a "grade" difference, but in touring both Oxnard and Vancouver, they have piles of sets of wood waiting to be made into guitars, with them all roughly/subjectively visually graded. On the rare occasions that they are building a -72, I am sure they dig through the pile of available really nice sets, and pull one that strikes them as extra really nice, as opposed to just pulling the top (or bottom / most aged ) set as they probably would for a -10 or -09. If you consider that as "grading", then it is not exactly classifiable -
Most of the wood Jean keeps for his guitars is about as good as it comes, whether it's an -03 or a -72 -
Quote from: tadol on May 31, 2010, 08:13:07 PM
Most of the wood Jean keeps for his guitars is about as good as it comes, whether it's an -03 or a -72 -
:+1: That's a big part of what makes Larrivee guitars so special! Not sure there are too many others in the business who know more about wood than JCL.