Warning: fopen(/home/larrivee/public_html/forum/cache/data_3e1b9f6c0d4d2352d7433232bf936de5-SMF-modSettings.cache): failed to open stream: Disk quota exceeded in /home/larrivee/public_html/forum/Sources/Cache/APIs/FileBased.php on line 84
Print Page - Thanks Jim Holler
Text only | Text with Images

Main Forums => Technical Discussion => Topic started by: Danny on October 27, 2009, 09:29:44 PM

Title: Thanks Jim Holler
Post by: Danny on October 27, 2009, 09:29:44 PM
   Another thanks is in order for good advice being passed on to us by these professional luthiers and technicians.
Jim gave me some advice on another thread about removing a nut without any wood splitting off or damage to finish.
                                   Well it worked great :thumbsup  
                Thanks so much for helping figure this painful procedure out Jim. :donut :donut2 :coffee :+1:

(http://inlinethumb38.webshots.com/16549/2638293440104334565S600x600Q85.jpg) (http://entertainment.webshots.com/photo/2638293440104334565ulODov)

btw this is my D-03 MTe  It's getting a new bone nut made by dependan. :blush:
Title: Re: Thanks Jim Holler
Post by: Trinity Guitars on October 28, 2009, 07:10:29 AM
Danny   Gald this work out well for you.
Jim
Title: Re: Thanks Jim Holler
Post by: DaveyO on October 28, 2009, 09:26:16 AM
just to say,
I had bought and sold a Larrivee d03r from a guy who bought it from Jim at trinity,it was the best set up guitar I had ever played.
I sold it (much to my regret, I have since bought another)
The man knows what hes  doing
Dave
Text only | Text with Images