Main Forums => Larrivée Guitars => Topic started by: campfirehero on May 24, 2008, 11:37:26 AM

Title: Any links for shining up a L-03R?
Post by: campfirehero on May 24, 2008, 11:37:26 AM
I want to buff up my L-03R, I remember seeing a post or link somewhere around here on materials used and a walkthrough...

thanks!
Title: Re: Any links for shining up a L-03R?
Post by: dbirchett on May 26, 2008, 04:00:08 PM
Here is a recent one:

Buffing Link (http://www.larriveeforum.com/smf/index.php?topic=21504.0)

Do a search for Orsino, meguiar's or meguiars, steel wool, buff or buffing. You will get a lot of reading material.
Title: Re: Any links for shining up a L-03R?
Post by: jeremy3220 on May 26, 2008, 05:57:51 PM
It's in the technical FAQ. Note that Scratch X has silicone in it. You can get real guitar polishing compounds from Stew Mac.
Title: Re: Any links for shining up a L-03R?
Post by: naboz on May 28, 2008, 12:04:13 PM
Well, hello Donny old boy! (D. Birchett) How's the wife and kids?
I just sold an LV03R that I did the Orsino/Meguiars method to one of the new members, Tad (who seems to be acquiring Larrivees w/a passion!)
I think it was the best (of four) 03 polishes I've done.   I have settled on an OM03SP (all sapele special edition)...
but, to the topic at hand...
why was it that "we" worry about/don't do the Meguiars Step 3--with silicone :crying:--anymore?!  I don't (often  :tongue:) lick my guitar, was there another reason?
Not enough RAM in the old grey matter these days  :wink:  Maybe Peter (HI!) will still be looking here and chime in.
Title: Re: Any links for shining up a L-03R?
Post by: snkysnake on May 28, 2008, 01:52:30 PM
I thought the reasoning for not using a silicon based product was because the silicon gets in the wood , and would really mess you up if you wanted to stain or refinish the guitar at some point .  I think that's what I remember reading ....LOL
Title: Re: Any links for shining up a L-03R?
Post by: jeremy3220 on May 28, 2008, 04:24:06 PM
Quote from: snkysnake on May 28, 2008, 01:52:30 PM
I thought the reasoning for not using a silicon based product was because the silicon gets in the wood , and would really mess you up if you wanted to stain or refinish the guitar at some point .  I think that's what I remember reading ....LOL

That's right
Title: Re: Any links for shining up a L-03R?
Post by: kdonovan on May 28, 2008, 04:31:10 PM
http://www.tomyoungguitar.com/OrsinoizingPage.html

kdonovan :guitar
Title: Re: Any links for shining up a L-03R?
Post by: dbirchett on May 28, 2008, 09:37:45 PM
Good to hear from you Bernie. Still have the 12 string?

The reason that we stopped doing the 3rd step is that it is a wax and also because it contains silicones. Peter Cree recommentded that we not use wax.
Title: Re: Any links for shining up a L-03R?
Post by: naboz on May 29, 2008, 08:12:15 AM
Yes, Don, still have the D03-12--incidently, my first Orsino-ized finish.  (It goes to my daughter when she graduates--but that's a secret until then  :whistling:)

I couldnt bring myself to NOT do the third step; I didnt like the fact the polish seemed to continually smudge unless I put the 3rd Step on.  I do remember Peter Cree cautioning something about a future re-finish being problematic if the wax was applied.  I should look in my files--there was something about mineral spirits (?) to remove the silicone based wax if one wished to re-do the entire process.
Title: Re: Any links for shining up a L-03R?
Post by: dvilla76 on May 29, 2008, 09:59:14 AM
campfirehero, I'm getting ready to gloss my Martin 000-15S, did a search at UMGF http://theunofficialmartinguitarforum.yuku.com/

http://theunofficialmartinguitarforum.yuku.com/search/text/?q=stew+mac+polishing+&name=&searchdate=0&beforeafter=after&orderby=relevance&boxes%5B%5D=1&boxes%5B%5D=2&boxes%5B%5D=3&boxes%5B%5D=5&boxes%5B%5D=6&verifyCode=ynac&advanced=1


Meguiars products have been removed from the unofficial "approved" list as they* contain silicone. *Meguiars commercial line sold to auto body shops is said to be non silicone so should be safe. Some have tried Stewart McDonald's Colortone Polishing Compound's for high gloss finishes #3 Fine and #4 Swirl Remover and found it to be a good alternative.

http://theunofficialmartinguitarforum.yuku.com/topic/1030



"Our polishing compounds remove fine sanding scratches from instrument finishes and plastic surfaces, while leaving no silicone residue to hamper future refinishing. Formulated to be applied by hand with a soft cloth, or with foam rotary polishing pads. Use Swirl Remover for a high luster on new or aged finishes."

http://www.stewmac.com/shop/Finishing_supplies/Abrasives,_polishes,_buffers/ColorTone_Polishing_Compounds.html


I believe a wet/moist T shirt is used to apply the product in not too large of areas (4" x 4" ? although I may try a bit larger) to prevent it from drying on the guitar with a final once over to make sure the gloss is consistent.


Use the search function just to be sure for yourself. I'm waiting for my #3 Fine and #4 Swirl Remover to arrive and will see how it goes.  Not an endorsement YMMV.


Good luck, Dave     :donut :donut2 :donut :donut2 :donut  :coffee

Title: Re: Any links for shining up a L-03R?
Post by: tadol on May 29, 2008, 10:43:18 AM
Hey Bernie -

That LV-03R I got from you is a great guitar - both in sound and in appearance. I guess I didn't realize you glossed it - it isn't really glossy, but is a little shinier than my OM - not owning anything above an -03, I can't compare to a factory gloss job.

I wonder how many people have had their guitars refinished? Maybe if I owned some fancy -09 or -10 model.  Although I want to keep mine looking good, I look at at Tommy E. or SRV, or many other incredible guitarists, and I would be happy to run a belt sander with some 60 grit across all of them if it guarranteed I could play like them -  :humour:

Tad
Title: Re: Any links for shining up a L-03R?
Post by: L-fan on May 29, 2008, 11:05:07 AM
Quote from: naboz on May 28, 2008, 12:04:13 PM
snip...  I have settled on an OM03SP (all sapele special edition)...
but, to the topic at hand...snip

Do you plan to gloss up your future OM03SP?   :nice guitar:

If so, please share pics, as I just got an L-03SP and would love to see how this would look.  Looking at my sapele git, I can't help but think that the grain would be stunning if done w/gloss finish. 
Title: Re: Any links for shining up a L-03R?
Post by: naboz on May 29, 2008, 12:04:45 PM
Great, Tad!  Glad everything worked out.  Yeah, you mention a couple of fire-finger owners there  :bowdown:
I have had my OM-SP since the weekend we traded,
and yes L-fan, I have already done the polishing.  The top came out the best.  For the sapele, it seems to have really brought out the crossing grain, giving it a shimmering depth like flamed koa.  Wish I would have known about the Stew-Mac product, I would have liked to try that with my buffer.  Nothing wrong with my results, but the photos of the other guitar using Colortone seem really nice.
I will try to post pics, but end of the year activities (school) and evening work may delay that request.