Main Forums => Technical Discussion => Topic started by: Celticjam on May 13, 2008, 10:25:41 PM

Title: Bridge for a CA Bluegrass Performer
Post by: Celticjam on May 13, 2008, 10:25:41 PM
I just picked up a CA Bluegrass Performer, "blemished", actually pretty scratched up without a nut, bridge, tuners or saddle.  I talked with CA and they wouldn't sell me a bridge. 

I think the tuners, saddle and nut are the least of my problems.  Finding a carbon fiber, graphite or micarta bridge might be the answer, but I can't seem to locate one.  Anybody have an idea where to get one?  I may wind up getting an ebony one but I'd rather stick with an un-natural material to go with the un-natural guitar.

Thanks,
Kevin
Title: Re: Bridge for a CA Bluegrass Performer
Post by: unclrob on May 13, 2008, 11:24:07 PM
You might try contacting Rainsong or maybe Graftech or Modules.If that fails go with ebony.
Title: Re: Bridge for a CA Bluegrass Performer
Post by: Celticjam on May 14, 2008, 12:39:22 PM
Unclrob,

Thanks for the advice.   :bowdown:  I will go with the ebony.

Kevin
Title: Re: Bridge for a CA Bluegrass Performer
Post by: unclrob on May 15, 2008, 09:34:22 AM
Make sure you score the bottom of the bridge and the top of the guitar so that the glue can get a good hold.I'm not sure what type to use.Check with Jim at Trinity he may be able to help.