Yep, I just got mine from didymus. Unfortunately, they didn't haul it to my door, so I had to go pick it up and walk it back here carrying an awkwardly big cardboard box :wacko:
So, I have heard from before, and on the package it states I should wait 24 hours in between temperature changes to open the guitar. Do I really need to wait that long? My box opening finger is getting itchy :tongue: I can't wait to :nana_guitar
And just because I'm feeling so good about it.
:donut :donut :donut :donut :donut :donut :donut :donut :donut :donut :donut2 :donut2 :donut2 :donut2 :donut2 :donut2 :donut2 :donut2 :donut2
:beer And a nice imperial stout to go with it!
What makes me sad about this is how much more I had to spend to get this and how much less didymus gets. The margin is significant nearing two very large bills. The shipping company and customs is flourishing right now!
Oh man,
If I were you, I could not wait 24 hours !!!
Anyway, congrats, and tnx for the donuts ! :cheers
Take the case out of the cardboard box, then wait another 60-90 minutes, and you should be okay. Especially with the satin finish, I don't think you need to worry about finish cracks, etc.
Welcome to the D-03R club! Love my lefty - it gets most of my acoustic playing time now!
:nice guitar:
D-03R... :thumb
Played one in a shop a few months last fall and it was huge!!!! One strum and I was surrounded by sound. D-03 in mahogany or sapele is very nice as well. Problem for me is I'd need one with a 1 3/4" nut..I find dread a bit too big for my style too. But that D-03R I play the day, wow, it had it all!
Congrats!! :nice guitar:
Quote from: Mikeymac on February 12, 2008, 06:09:02 PM
Take the case out of the cardboard box, then wait another 60-90 minutes, and you should be okay. Especially with the satin finish, I don't think you need to worry about finish cracks, etc.
Welcome to the D-03R club! Love my lefty - it gets most of my acoustic playing time now!
:nice guitar:
didymus actually added gloss to it ;)
I think I will take it out of the box and leave it out for about 2 hours. Then open it :D
Too cool, man! Congrats! I played an HD-28 today at Guitar Center and it had nothing on my old D03r, except about $1600 more; Aside from the history factor, I sure don't get the hype w/ those things...Heck, you practically got a custom guitar.
So the thing about not unpacking it for 24 hours, does that depend on how long it's been outside? I don't imagine it's for reasonably short trips. I received a notice today saying that it is available for pickup, so I imagine it has been sitting in the Post Office since the morning. It's now 8:30pm, can I open it yet? :bgrin: Still haven't opened the box yet...
Congratulations! I hope it's what you were looking for.
I've never waited that long to unpack a guitar....but yeah, the labels were left on from when the guitar was shipped to me. Take the case out of the box....see if it feels cold...if not, then try cracking open the case enough to feel the guitar and see if it feels cold. If things don't feel freezing cold...you're probably good to go. This note is about 4 hours after your original post....if you haven't opened it yet...open it!
Did you get that additional envelope that I mailed?
Hey didymus,
No I didnt' get any sort of additional envelope. Was it supposed to be inside the box?
Okay, I realized what a stupid thing that was to say. I'll call tomorrow and ask. The lady was holding an envelope, it was a fairly big one, so I wasn't sure if it was for someone else. I doubt thye would throw it out.
Nice pick!!!
I have a D-03RE that's about two months old and it's really starting to open up nicely. I put a set of D'addario PB lights on it and love the sound. However, I'm about to upgrade to a bone saddle and some ebony pins, and I think I will try out some mediums then as I've heard great things. Just wondering who the ebony pins with the abolonie inlays will look with the understated features for the 03 series?
:nice guitar: :nice guitar: :donut :donut2 :donut :donut2 :donut :donut2
Quote from: Raphael on February 12, 2008, 09:26:01 PM
Hey didymus,
No I didnt' get any sort of additional envelope. Was it supposed to be inside the box?
I mailed you some strings at no charge. Hopefully they won't charge you anything to pick them up. Make another post when you've opened the guitar case!
Hey Didymus,
I just opened it up. It looks awesome! The new spruce as you showed in the picture is a lot less prominent in real life. The pictures made it looks worse than it is. Nice work with the gloss. I can see the marks you referred to from sanding, but I think the swirls add to the guitar's beauty. The first thing that took me aback was the interior of the case. Love the patterning, and thanks for the note about the humidifier. I'm planning on getting one for my room, so I guess it works out. Now I just gotta convert that to CAD :winkin:
Plays beautifully! I have to admit I don't find the neck as comfortable as my friend's Seagull S6+CW. I'm used to playing wider necks, and this feels slim under my hand. One thing I noticed is that the tag inside the guitar says D-03. Must be some sort of error, unless the D-03s were originally rosewood in the past. The D-03Rs I played in the store strictly said D-03R. Just a curious question. This is unmistakably rosewood. The colour and patterning of the grain clearly indicate it. I gotta say didymus, your pictures really brought out the subtle flaws in the guitar. It honestly looks gorgeous. My roommate said "shiny" as soon as I took it out. The glossing is beautiful and altogether I am very pleased. I may take it in for a setup unless I get used to this setup. The slight fret buzz mentioned isn't present either :smile: Maybe the shipping took care of it.
Thanks for the extra strings. Did you send it all as one package or is it separate?
I think I found one thing I don't like about it. And that is the fretboard. The sound is really growing on me in every other way, but doing hammer-ons and pull-offs, as well as playing single notes up and down the neck feels and sounds very cheap. This may just be something to do with setup or strings. Any ideas guys?
Quote from: Raphael on February 12, 2008, 10:28:23 PM
This may just be something to do with setup or strings. Any ideas guys?
:+1:
With good strings/setup, hammer on/pull off's should sound great. Ebony fretboard, solid mahogany neck, nickel/silver frets (decent), don't typically equal cheap. Are the frets lifting or worn down? You may just need to get the feel for the 1 11/16 neck.
Beats me...the cheap sounding hammer on/pull offs are new to me. Does it make the sound you are describing everywhere you hammer on, or just in certain spots? Hopefully a good set-up will take care of the issue you are describing.
I'm glad my description of the guitar was conservative and that it arrived in better condition than you were expecting. That's always a plus. By the way, the strings were sent afterward in a separate envelope. I wanted to include them with the case, but they didn't arrive in time. They are mediums and the best brand I've used, hopefully you like them. I forgot that not everywhere in CAN accepts American dollars even though the exchange rate is so dang close....but it was all I had :winkin:
I believe the older models were just labeled D-03 and that they didn't designate a specific "R" character for the difference in tonewood. You can always confirm the materials with the serial number. But, as you mentioned...no question it is rosewood.
Matt, I think it may just be the strings. I've had experience with strings in the past causing that sort of feel. It feels very smooth (too smooth). As if there is no grip and the notes don't ring well on hammer on and offs almost anywhere on the neck, as well as slides. What strings are on these right now? The construction of the guitar is certainly not cheap as I can see. So it must be something in the setup or the strings.
EDIT: I'm sure it's the strings. I don't like the feel of of plucking it with my right hand. I think a change of strings and a setup will benefit this guitar. How much does a typical setup cost?
No idea what a typical set-up costs. I've never had one done. I'd guess around $50.
The strings are John Pearse, Phosphor bronze Lights. I sent you mediums of the same kind. Maybe they just don't go well with the D-03R....
BY the way, did you get the two "larrivee" stickers I included? They were up at the headstock under the newspaper.
Yep, I did get the two stickers. Thanks! :smile:
And I am now confident it is the setup. At first I was going up and down softly plucking and strumming notes. When I play more forte notes (not very hard, about the amount you would apply playing some swing jazz or blues), I have started discovering fret buzzing all over the place. I have found at least 5. I don't blame you. I'm sure you had it setup fine. I think the trip and the constant change of temperatures has caused some change. She is sure is a purty one :whistling:
New strings will do the trick. The buzzing is common for a guitar that moves to a perminance new environment or seasonal changes and a set up should do the trick. Congratulations on your fine guitar.
Thanks! I've hardly been able to put it down. Never imagined I would get a guitar this good for such an amazing price!
I have a question. I have decided to get this guitar setup (depending on the price the local luthiers charge). And I figure, if I'm going to get it setup, I might as well make the changes now as I don't want to pay for having it setup again. Thanks to didymus, the D-03R already has a compensated bone nut. I'm thinking of adding in a bone saddle, as well as some ebony pins. Any other suggestions that might be better? And in rough estimate, how much would this set me back in price, and where can I get these? (local guitar store?)
I think you can expect to pay $80-90 for a set up and a bone saddle. Good idea to do both at the same time, otherwise you'll end up paying twice for a set up...unless you wait a couple years until you need another set up.
Quote from: Raphael on February 14, 2008, 01:04:42 PM
I have a question. I have decided to get this guitar setup (depending on the price the local luthiers charge). And I figure, if I'm going to get it setup, I might as well make the changes now as I don't want to pay for having it setup again. Thanks to didymus, the D-03R already has a compensated bone nut. I'm thinking of adding in a bone saddle, as well as some ebony pins. Any other suggestions that might be better? And in rough estimate, how much would this set me back in price, and where can I get these? (local guitar store?)
A very good repair shop in Portland, OR has a price list on their page. Here's the link: http://the12thfret.com/
Here's a quick reference for their prices:
Setup $60-$80
Nut / Saddle $50-$80
Ebony nut and bridge pins will cost you a bit, but you can purchase them directly from larriveewearables.com. The nut is unslotted, so a tech will have to do that unless you are feeling brave.
Nut= $10 But, the nut blank is usually provided by the tech.
Bridge pins w/abalone dots = $15.00
http://larriveewearables.com/sess/utn;jsessionid=1547b4a2610ae9a/shopdata/0070_Parts/0300_Miscellaneous+Parts/product_overview.shopscript
There is a 12th Fret in Toronto as well. I may decide to go there once I head back home after this semester.
Thanks for throwing in the bone nut. In terms of pins, what will make a bigger sonic difference? The ebony pins or bone pins?
Quote from: Raphael on February 14, 2008, 04:05:40 PM
There is a 12th Fret in Toronto as well. I may decide to go there once I head back home after this semester.
Thanks for throwing in the bone nut. In terms of pins, what will make a bigger sonic difference? The ebony pins or bone pins?
I don't feel pins really make a difference....IMO anything past the saddle is moot. Just put your finger on the string after the saddle and pluck it. When I do this I don't hear any difference. But, others will disagree.
The twelfth fret in Toronto is different from the twelfth fret in Portland. The Portland shop is a very small business owned by guys that are not affiliated with http://www.12fret.com
But, FWIW, I think taking it to the Toronto 12 fret would be a very good idea. From what I hear, they really know their stuff.