Main Forums => Technical Discussion => Topic started by: Elohnine on October 12, 2006, 04:15:21 PM

Title: Crack on brand new L-09, what should be done? (pictures)
Post by: Elohnine on October 12, 2006, 04:15:21 PM
This guitar WAS a scratch and dent special; I got three hundred dollars off for this. I hope that I wont pay that much getting this repaired. At first I thought this was merely a scratch, but upon further inspection I realized it is most certainly a crack that goes through. It is VERY light on the inside of the guitar, but regardless, I am assuming that something must be done. I am new to the world of high end acoustics, so I do not know anything about damage of this kind. Is this affecting the guitar right now? Could it get worse with time? Was this a bad buy? I am a little nervous about this, but I know that guitars get damaged and repaired all the time...I would appreciate if suggestions come from those with professional guitar repair experience...at this price I can't go by "that will probably be ok" if you get my drift  :tongue: Thanks.

(http://img253.imageshack.us/img253/9827/img2314eb9.jpg)

It is VERY light on this picture...look carefully just above the paper

(http://img256.imageshack.us/img256/9543/img2323ph4.jpg)
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: jwieties on October 12, 2006, 04:31:16 PM
Unclrob will be along shortly and you should follow whatever advice he gives.

However, it is an odd crack.  Most will go with the grain of the wood.  Hold a flashlight to the back of the crack and see how it shines through to the inside.  This will give you an idea if it does indeed go all the way through.  Looks like it must have been a case latch or something along those lines that gouged it.  If it is not a crack then it is really no big deal.  Even if it is it should be an easy fix.  A local guy that fixes cracks like this does it by the inch... I think it was like $10 per inch.

You may want to talk to the shop where you bought it if it is a crack and needs to be repaired. 

Man... now I am missing my old L-09

Good Luck
-josh
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: jmhyer on October 12, 2006, 05:51:42 PM
I think that it would be ok to watch this one for a while.  If there is any sign of worsening, then it should be repaired.  Alternatively, you could go ahead and have it fixed.  It shouldn't cost much.  As Josh said, Rob will give you sound advice.  You could PM him if you want to take the initiative.
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: Ratishna on October 12, 2006, 05:57:38 PM
No biggie, but any open crack needs to be repaired sooner rather than later.  It will close up better and not be contaminated by the elements.
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: poki on October 12, 2006, 06:16:09 PM
here's some additional info from larrivee

http://www.larrivee.com/flash/customerservice/repairinfo.html

Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: unclrob on October 12, 2006, 09:36:43 PM
At best get someone to pack it with glue.It doesn't look bad.Do what Josh say's with the flashlite and try to take a pix of it.If you get a chance call me so I can get you to do a few things so I know better the damage.
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: Elohnine on October 13, 2006, 12:45:18 AM
Ok, did the flashlight thing...no light showing through. Regardless, I think this is something that could potentially be a problem in the future (of course I may be wrong, after all that is coming from someone with no knowledge of guitar repair). What kind of glue would you recommend?
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: unclrob on October 13, 2006, 08:48:05 AM
I use a yellow wood glue.Push the glue into the crack,with a damp paper towel wipe off the excess.I use masking tape to hold down any lift and a small weight{1-2 lbs} and leave it alone for 3 days.This means don't play with it.After 3 days remove weight and tape.Clean area one more time with damp paper towel.This should hold for ever. :nana_guitar
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: Elohnine on October 13, 2006, 11:07:52 AM
Ok, great. Would you put the glue on both sides of the crack? Is there any certain tape I should use? (dont want to hurt the finish)
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: bhika on October 13, 2006, 12:04:48 PM
Quote from: Elohnine on October 13, 2006, 11:07:52 AM
Ok, great. Would you put the glue on both sides of the crack? Is there any certain tape I should use? (dont want to hurt the finish)

I would think that the best type of tape to use in this situation would be the one applied by an experienced tech.
If's it's only 10-20 dollars to have this professionally repaired I would not risk gluing it up myself.
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: Elohnine on October 13, 2006, 01:18:59 PM
You are extremely right. I dont know why the thought entered my head to try this myself.
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: unclrob on October 13, 2006, 06:27:21 PM
I use regular masking tape.

A tech is your best bet.
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: sneaky on October 13, 2006, 08:16:16 PM
sometimes...techs are just not available and in Japan, hard to find anything that costs $10. to $20.oo...no wait...phone calls.
I have a #20 Yamaha Dyamic with a nasty crack that I posted about recently and I haven`t forgotten about it but
I have a line on another that I`m the only bidder on so far and my bid is...$10.oo... but thats gonna go up. Will see iffin I can
find some yellow wood glue in this city but won`t hold my breath.
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: PortHueneme on October 20, 2006, 03:50:27 PM
I had a small crack on the side of one my babies (stupid accident). I took it to my tech and he recommended I get it fixed before moisture worked its way into the wood and cause more damage. The crack was on the lower bout and I was afraid it would someday run. It was a $75 repair. After his work it is very difficult to see any signs of the damage.
It's a maple Gibson and is one of regular gigging guitars so I was not concerned with the price. My advice is find a tech and get it repaired. You got a great guitar don't take a chance.
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: HangFire on October 22, 2006, 12:19:54 PM
Man, we are lucky to have unclrob here!!! :thumb
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: mhelin on April 06, 2007, 06:36:38 AM
Is it generally safe to buy a guitar with a crack? There's a D-03 with a crack in back (in the usual spot about under the bridge where the matched halves of the back wood are joined) in  a local store and they would sell it with about 20% discount. Is it too risky business to buy it, and too low discount anyway? Guitar is new but importer did nothing else to it than used moisture (in air) to smooth the crack out (it's not properly repaired yet).
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: sgarnett on April 06, 2007, 08:13:34 AM
The crack shown in the photo is broken across the grain. I do have a poplar board in my wood shop that cracked cross-grain just standing in the corner, but I don't see any evidence of a grain feature that would explain a crack like that. On the other hand, there's a slightly darker area about the size of a thumb print around the crack. I suspect that is really a slight depression (reflecting the lighting differently) from the solid thump it took to induce such a crack.

I don't think you would want to glue it (and set the dent permanently) without weighting it on the inside or using a clamp and caul of some sort to apply pressure from the inside while the glue sets. That's not a task I would attempt myself.

I wouldn't just ignore it, because any contamination that gets into the crack is going to make it harder to fix later. Definitely keep polish and wax and especially silicone (in many polishes and hand lotions lotions) away from the crack until it can be repaired.
Title: Re: Crack on brand new L-09, what should be done? (pictures)
Post by: stuco on April 09, 2007, 08:53:07 PM
 :ph34r:

Yes you got a good deal.  Yes you need to take it to a qualified tech and get it professionally fixed.  after that, you will still have gotten a great deal.